{
  "abstract": "Thermochromic coatings have been widely investigated, with most studies focusing on novel microcapsule systems. However, the thermochromic performance of coatings under a spatially separated heat source, as well as the influence of coating parameters on thermochromic behavior, remains insufficiently explored. In this study, an earplug structure embedded with a thermochromic coating was prepared, and the effects of coating filler content, coating thickness, and dye concentration on thermochromic behavior were systematically investigated. A distinct color transition was successfully achieved even when the coating was positioned away from the heat source. Simulation results indicate that, under a 40 °C heat source, the effective color‑transition temperature of the coating within the earplug structure should be maintained at approximately 34 °C. The incorporation of HBN accelerates the transition process and narrows the color-transition temperature range, enabling complete color change at around 34 °C. In addition, the effective color-changing distance is extended from 2.2 cm to 3.7 cm; however, a high HBN content reduces the ΔE color difference. Increasing coating thickness prolongs the transition time and darkens both the initial and final colors, with a thickness of 30 μm yielding the maximum ΔE value. The addition of blue dye generates visually distinguishable pre-transition and post-transition states. Although increasing blue dye concentration decreases the ΔE value between pre-transition and post-transition colors, it increases the ΔE* value between the post-transition color and pig skin color. Under a 40 °C heat source, the thermochromic coating in the earplug rapidly changes from light purple to blue. These results suggest that thermochromic coatings hold potential for low-cost, visually intuitive earplugs for fever detection in swine, although further validation is required.",
  "abstract_shown": true,
  "affiliations": [
    "School of Digital Intelligence Design, Chengdu Technological University, Chengdu, Sichuan, China",
    "School of Materials and Environmental Engineering, Chengdu Technological University, Chengdu, Sichuan, China",
    "Sichuan Yibin Wuliangye Jingmei Printing Co., Ltd., Yibin, Sichuan, China",
    "School of Mechanical and Electrical Engineering, Yibin Industry Polytechnic College, Yibin, Sichuan, China",
    "School of Mechanical Engineering, Chengdu Technological University, Chengdu, Sichuan, China",
    "School of Robotics, Chengdu Technological University, Chengdu, Sichuan, China",
    "Chengdu Wuyu Industrial Design Co., Ltd., Chengdu, Sichuan, China",
    "School of Architecture, Southwest Minzu University, Chengdu, Sichuan, China"
  ],
  "article_type": "Research Article",
  "arxiv": null,
  "author_total": 16,
  "authors": [
    {
      "affs": [
        0
      ],
      "name": "Libo Wan"
    },
    {
      "affs": [
        1
      ],
      "name": "Junxin Luo"
    },
    {
      "affs": [
        2
      ],
      "name": "Jun Chen"
    },
    {
      "affs": [
        3
      ],
      "name": "Jing Fan"
    },
    {
      "affs": [
        4
      ],
      "name": "Yuebu Jike"
    },
    {
      "affs": [
        5
      ],
      "name": "Yuhao Luo"
    },
    {
      "affs": [
        6
      ],
      "name": "Danping Wang"
    },
    {
      "affs": [
        7
      ],
      "name": "Taoli Xiao"
    },
    {
      "name": "Yijun Liao"
    },
    {
      "name": "Yanqing Jia"
    },
    {
      "name": "Xiaoxiao Li"
    },
    {
      "name": "Kuan Peng"
    },
    {
      "name": "Xin Gao"
    },
    {
      "name": "Cheng Liu"
    },
    {
      "name": "Xiaolin Hu"
    },
    {
      "name": "Xinhai Zhou"
    }
  ],
  "bibtex": "https://research.draconitic.com/paper/9kv65kyf0df5g.bib",
  "cited_by": 0,
  "doi": "10.1371/journal.pone.0358752",
  "fulltext_url": null,
  "id": "9kv65kyf0df5g",
  "issns": [
    "1932-6203"
  ],
  "landing_url": "https://doi.org/10.1371/journal.pone.0358752",
  "language": null,
  "licence": "CC-BY-4.0",
  "licence_label": "CC BY 4.0",
  "licence_source": "journal",
  "licence_url": "https://creativecommons.org/licenses/by/4.0/",
  "metadata_licence": null,
  "native_subjects": [
    [
      "openalex",
      "2507|Transition Metal Oxide Nanomaterials"
    ],
    [
      "plos",
      "/Biology and life sciences/Anatomy/Head/Ears"
    ],
    [
      "plos",
      "/Biology and life sciences/Organisms/Eukaryota/Animals/Vertebrates/Amniotes/Mammals/Swine"
    ],
    [
      "plos",
      "/Biology and life sciences/Physiology/Physiological parameters/Body temperature"
    ],
    [
      "plos",
      "/Biology and life sciences/Zoology/Animals/Vertebrates/Amniotes/Mammals/Swine"
    ],
    [
      "plos",
      "/Engineering and technology/Industrial engineering/Process engineering/Industrial processes/Manufacturing processes/Surface treatments/Coatings"
    ],
    [
      "plos",
      "/Medicine and health sciences/Anatomy/Head/Ears"
    ],
    [
      "plos",
      "/Medicine and health sciences/Clinical medicine/Signs and symptoms/Fevers"
    ],
    [
      "plos",
      "/Physical sciences/Chemistry/Chemical elements/Aluminum"
    ],
    [
      "plos",
      "/Physical sciences/Materials science/Material properties/Surface properties/Surface temperature"
    ],
    [
      "plos",
      "/Physical sciences/Materials science/Material properties/Thermal conductivity"
    ],
    [
      "plos",
      "/Physical sciences/Materials science/Materials/Coatings"
    ]
  ],
  "openalex": "W7214014985",
  "pdf_url": "https://journals.plos.org/plosone/article/file?id=10.1371/journal.pone.0358752&type=printable",
  "pmcid": null,
  "pmid": null,
  "published": "2026-09-22",
  "publisher": "Public Library of Science",
  "ris": "https://research.draconitic.com/paper/9kv65kyf0df5g.ris",
  "sources": [
    {
      "first_seen": "2026-10-30T12:17:43Z",
      "native_id": "10.1371/journal.pone.0358752",
      "source": "plos",
      "url": "https://doi.org/10.1371/journal.pone.0358752"
    }
  ],
  "subjects": [
    {
      "field": "chemistry",
      "origin": "plos:materials science",
      "subfield": "materials-polymers"
    },
    {
      "field": "medicine",
      "origin": "plos:anatomy",
      "subfield": "physiology"
    }
  ],
  "title": "Effects of coating composition and thickness on thermochromic performance and application in earplugs for swine fever",
  "title_text": "Effects of coating composition and thickness on thermochromic performance and application in earplugs for swine fever",
  "type": "peer-reviewed",
  "updated_at": "2026-10-30T12:17:43Z",
  "url": "https://research.draconitic.com/paper/9kv65kyf0df5g",
  "venue": "PLOS One",
  "versions": []
}