{
  "abstract": "This study investigates the performance of solid-state dye-sensitized solar cells (ssDSSCs) employing four hole transport layer (HTL) candidates: cadmium telluride (CdTe) and three kesterite materials—copper-barium-tin sulfide (CBTS), copper-iron-tin sulfide (CFTS) and copper-manganese-tin sulfide (CMTS). Electrical and optical parameters collected from the literature were incorporated into SCAPS-1D for device modelling. A comprehensive analysis examined the effects of HTL thickness, temperature, absorber and electron transport layer (ETL) thickness, capacitance, parasitic resistance and doping concentration on device performance. The results demonstrate that CdTe is a highly promising HTL, with the optimized fluorine-doped tin oxide (FTO)/ZnO/ruthenium complex dye (N719)/CdTe/Pt heterostructure achieving a power conversion efficiency (PCE) of 21.58%, a fill factor (FF) of 87.86%, an open-circuit voltage (VOC) of 1.106 V and a current density (JSC) of 22.21 mA cm−², exceeding previously reported values. Among kesterite-based HTLs, CBTS and CFTS exhibited notable PCEs of 16.42 and 14.80%, respectively, outperforming comparable studies. These findings indicate that CdTe, CBTS and CFTS are strong candidates for ssDSSC applications, offering enhanced efficiency and stability. Notably, CBTS emerges as a low-cost, Earth-abundant alternative with favourable band alignment and high thermal stability. This work provides valuable insights for advancing efficient and sustainable ssDSSC technologies.",
  "abstract_shown": true,
  "affiliations": [
    "Department of Electrical and Electronic Engineering, International Islamic University Chittagong , Chattogram, 4318, Bangladesh"
  ],
  "article_type": "research article",
  "arxiv": null,
  "author_total": 4,
  "authors": [
    {
      "affs": [
        0
      ],
      "name": "Minhajul Abedin"
    },
    {
      "affs": [
        0
      ],
      "name": "Imtiaz Ahamed"
    },
    {
      "affs": [
        0
      ],
      "name": "Md. Zahid Hasan",
      "orcid": "0000-0001-8616-1830"
    },
    {
      "affs": [
        0
      ],
      "name": "M. S. H. Choudhury",
      "orcid": "0000-0002-0862-5000"
    }
  ],
  "bibtex": "https://research.draconitic.com/paper/e15z88jvbzqes.bib",
  "cited_by": 0,
  "doi": "10.1098/rsos.251606",
  "fulltext_url": "https://europepmc.org/articles/PMC13750934",
  "id": "e15z88jvbzqes",
  "issns": [
    "2054-5703"
  ],
  "landing_url": "https://royalsocietypublishing.org/rsos/article/13/11/251606/484146/Numerical-modelling-of-ZnO-based-solid-state-dye",
  "language": "eng",
  "licence": "CC-BY",
  "licence_label": "CC BY",
  "licence_source": "article",
  "licence_url": "https://creativecommons.org/licenses/by/4.0/",
  "metadata_licence": null,
  "native_subjects": [
    [
      "heading",
      "Engineering"
    ],
    [
      "heading",
      "Materials Science"
    ],
    [
      "heading",
      "Photochemistry"
    ],
    [
      "heading",
      "Research"
    ]
  ],
  "openalex": null,
  "pdf_url": "https://royalsocietypublishing.org/rsos/article-pdf/doi/10.1098/rsos.251606/6176975/rsos.251606.pdf",
  "pmcid": "PMC13750934",
  "pmid": "43011753",
  "published": "2026-11-04",
  "publisher": "The Royal Society",
  "ris": "https://research.draconitic.com/paper/e15z88jvbzqes.ris",
  "sources": [
    {
      "first_seen": "2026-11-11T12:21:18Z",
      "native_id": "10.1098/rsos.251606",
      "source": "crossref",
      "url": "https://royalsocietypublishing.org/rsos/article/13/11/251606/484146/Numerical-modelling-of-ZnO-based-solid-state-dye"
    },
    {
      "first_seen": "2026-11-12T15:23:59Z",
      "native_id": "MED:43011753",
      "source": "europepmc",
      "url": "https://europepmc.org/article/MED/43011753"
    },
    {
      "first_seen": "2026-11-14T12:23:25Z",
      "native_id": "PMC13750934",
      "source": "pmc",
      "url": "https://doi.org/10.1098/rsos.251606"
    }
  ],
  "subjects": [
    {
      "field": "chemistry",
      "origin": "heading:Materials Science",
      "subfield": "materials-polymers"
    }
  ],
  "title": "Numerical modelling of ZnO-based solid-state dye-sensitized solar cells employing CdTe and kesterite Cu2XSnS4 (X = Fe, Ba and Mn) hole transport layers",
  "title_text": "Numerical modelling of ZnO-based solid-state dye-sensitized solar cells employing CdTe and kesterite Cu2XSnS4 (X = Fe, Ba and Mn) hole transport layers",
  "type": "peer-reviewed",
  "updated_at": "2026-11-14T12:23:25Z",
  "url": "https://research.draconitic.com/paper/e15z88jvbzqes",
  "venue": "Royal Society Open Science",
  "versions": []
}