Stable Nitrogen-Doped TiO2 Sols with Enhanced Visible-Light Response and Surface Wettability for Air Purification
5 affiliations
- 1Research Institute of Highway Ministry of Transport, Beijing 100088, China
- 2Institute of Urban Safety and Environmental Science, Beijing Academy of Science and Technology, Beijing 100054, China
- 3Hebei Key Laboratory of Pharmaceutical Polymer Excipients, College of Chemical Engineering, Shijiazhuang University, Shijiazhuang 050035, China
- 4National Centre for Archaeology, Beijing 100013, China
- 5School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Abstract
Photocatalytic coatings that can be immobilized on outdoor surfaces provide a promising route for distributed and passive purification of atmospheric pollutants. The practical application requires not only visible-light photocatalytic activity but also stable dispersion, facile coating and favorable interfacial properties. In this work, N-doped TiO2 (N-TiO2) sols with different nominal doping contents were prepared through hydrothermal treatment of peroxotitanic acid precursors containing different amounts of urea at 130 °C for 4 h. All samples exhibited anatase phase, while the shifts in XRD and Raman peaks indicated nitrogen-doping-induced lattice distortion. The sols exhibited monomodal particle size distributions with average hydrodynamic diameters in the range of 20.13 nm to 27.07 nm, and the high absolute zeta potentials (>30 mV) demonstrated good dispersion stability. The XPS results confirmed that nitrogen atoms were introduced at interstitial sites with Ti-O-N bonds and increased the relative proportion of surface hydroxyl oxygen from 13.9% to 34.2%. Nitrogen doping improved the visible-light absorption by decreasing the bandgap from 3.06 eV to 2.81 eV and reduced the water contact angle of the sol-derived films from 24.0° to as low as 8.6°. Among all samples, 1.0N-TiO2 exhibited the highest NO removal efficiency of 72.5% under visible-light irradiation and retained good stability over five photocatalytic cycles. These results demonstrate that moderate nitrogen doping can simultaneously regulate the colloidal, optical and interfacial properties of TiO2 sols, making them promising coating materials for functionalization of building envelopes or other outdoor surfaces for air purification.
Related
- Fabrication of a Hierarchical Bioinspired Super-Contrast Wettability Surface for Enhanced Atmospheric Water Collection.
- Wettability-Tuned Polydopamine-Modified Surfaces for Enhanced Dropwise Condensation and Water Harvesting
- Enhanced Visible-Light Photocatalytic Activity of Bi-Doped ZnFe2O4 Thin Films toward Rhodamine B and Metronidazole Degradation
- Plasmonic Ag@ZIF-8 Monolith for Enhanced Visible-Light Photocatalytic Degradation of Methylene Blue
- Response of Plankton Community Under High-Nitrogen Ecological Replenishment: Niche Differentiation and Species Interactions.
BibTeX
@article{wang2026stable,
title = {{Stable Nitrogen-Doped TiO2 Sols with Enhanced Visible-Light Response and Surface Wettability for Air Purification}},
author = {Shuwei Wang and Jinhua Liu and Weijie Liu and Yiting Jia and Ning Liu and Yifan Ren and Yanni Zhang and Jingjing Zhang and Peng Zhao and Zhanyong Gu and Feng Wang and Wenbin Cao and Zhanwu Ning and Peng Sun},
journal = {Catalysts},
year = {2026},
month = oct,
doi = {10.3390/catal16100916},
url = {https://www.mdpi.com/2073-4344/16/10/916},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Stable Nitrogen-Doped TiO2 Sols with Enhanced Visible-Light Response and Surface Wettability for Air Purification
AU - Shuwei Wang
AU - Jinhua Liu
AU - Weijie Liu
AU - Yiting Jia
AU - Ning Liu
AU - Yifan Ren
AU - Yanni Zhang
AU - Jingjing Zhang
AU - Peng Zhao
AU - Zhanyong Gu
AU - Feng Wang
AU - Wenbin Cao
AU - Zhanwu Ning
AU - Peng Sun
PY - 2026
DA - 2026/10/16
JO - Catalysts
DO - 10.3390/catal16100916
UR - https://www.mdpi.com/2073-4344/16/10/916
AB - Photocatalytic coatings that can be immobilized on outdoor surfaces provide a promising route for distributed and passive purification of atmospheric pollutants. The practical application requires not only visible-light photocatalytic activity but also stable dispersion, facile coating and favorable interfacial properties. In this work, N-doped TiO2 (N-TiO2) sols with different nominal doping contents were prepared through hydrothermal treatment of peroxotitanic acid precursors containing different amounts of urea at 130 °C for 4 h. All samples exhibited anatase phase, while the shifts in XRD and Raman peaks indicated nitrogen-doping-induced lattice distortion. The sols exhibited monomodal particle size distributions with average hydrodynamic diameters in the range of 20.13 nm to 27.07 nm, and the high absolute zeta potentials (>30 mV) demonstrated good dispersion stability. The XPS results confirmed that nitrogen atoms were introduced at interstitial sites with Ti-O-N bonds and increased the relative proportion of surface hydroxyl oxygen from 13.9% to 34.2%. Nitrogen doping improved the visible-light absorption by decreasing the bandgap from 3.06 eV to 2.81 eV and reduced the water contact angle of the sol-derived films from 24.0° to as low as 8.6°. Among all samples, 1.0N-TiO2 exhibited the highest NO removal efficiency of 72.5% under visible-light irradiation and retained good stability over five photocatalytic cycles. These results demonstrate that moderate nitrogen doping can simultaneously regulate the colloidal, optical and interfacial properties of TiO2 sols, making them promising coating materials for functionalization of building envelopes or other outdoor surfaces for air purification.
SN - 2073-4344
ER -