Stop-Flow Lithography Using Hydrodynamic Flow Resistance Regulation and Hydraulic Compliance Minimization for Size-Tunable Anisotropic Multilayered Microparticles Fabrication
- 1Technical University of Munich
Abstract
Stop-flow lithography (SFL) enables the fabrication of microparticles with designed geometries and material compositions, but its performance relies on rapid flow stopping, which remains particularly challenging in multi-inlet systems with high hydrodynamic flow resistance and hydraulic compliance. Here, we develop a pneumatic-controlled SFL platform with a framework based on flow resistance regulation and hydraulic compliance minimization for fabricating size-tunable anisotropic multilayered microparticles. Our analysis indicates that flow-stopping behavior is governed by the release of extra fluid volume stored in the system due to hydraulic compliance, which arises from the deformation of microfluidic components and the compressibility of the fluid within them. Through numerical modeling and analysis, we identify deformation in the PDMS inlet port region as the dominant contributor to the stored extra fluid volume. By regulating the flow resistance of the tubing relative to that of the outlet channel, the stored extra fluid volume can be preferentially released forward through the outlet or backward through the inlet tubing, enabling rapid flow stopping across configurations with 500, 250, and 100 m outlets. Furthermore, by supporting the PDMS membrane beneath the inlet region with a rigid glass substrate and reducing its dimensions, the hydraulic compliance and consequently the stored extra fluid volume are significantly reduced. With these strategies, microparticles with well-defined boundaries can be fabricated at short, flow-stopping, delay times, and the flow profiles obtained in multi-inlet systems can be preserved during flow stopping and transferred into particle patterns.
Related
- IOP-independent treatment for neurodegeneration in glaucoma using optimized ROS-scavenging microparticles for sustained release of erythropoietin
- Multilayered extracellular matrix derived scaffolds direct progenitor cell differentiation in vitro and osteochondral-tissue formation in vivo.
- Probing the transcriptome response to shivering in skeletal muscle using a multilayered bioinformatics approach
- Arena3D 3.0: a web server for exploring, analyzing, annotating and sharing multilayered networks in 3D
- Platelet-derived microparticles induce CD8+ T cell senescence in chronic kidney disease via the transfer of microRNA-550a-5p
BibTeX
@misc{zou2026stopflow,
title = {{Stop-Flow Lithography Using Hydrodynamic Flow Resistance Regulation and Hydraulic Compliance Minimization for Size-Tunable Anisotropic Multilayered Microparticles Fabrication}},
author = {Y. Zou and M. U. Akhtar and G. Destgeer},
howpublished = {bioRxiv},
year = {2026},
month = nov,
doi = {10.64898/2026.11.01.763425},
url = {https://www.biorxiv.org/content/10.64898/2026.11.01.763425v1},
note = {CC BY-NC-ND},
}
RIS
TY - UNPB
TI - Stop-Flow Lithography Using Hydrodynamic Flow Resistance Regulation and Hydraulic Compliance Minimization for Size-Tunable Anisotropic Multilayered Microparticles Fabrication
AU - Y. Zou
AU - M. U. Akhtar
AU - G. Destgeer
PY - 2026
DA - 2026/11/01
PB - bioRxiv
DO - 10.64898/2026.11.01.763425
UR - https://www.biorxiv.org/content/10.64898/2026.11.01.763425v1
AB - Stop-flow lithography (SFL) enables the fabrication of microparticles with designed geometries and material compositions, but its performance relies on rapid flow stopping, which remains particularly challenging in multi-inlet systems with high hydrodynamic flow resistance and hydraulic compliance. Here, we develop a pneumatic-controlled SFL platform with a framework based on flow resistance regulation and hydraulic compliance minimization for fabricating size-tunable anisotropic multilayered microparticles. Our analysis indicates that flow-stopping behavior is governed by the release of extra fluid volume stored in the system due to hydraulic compliance, which arises from the deformation of microfluidic components and the compressibility of the fluid within them. Through numerical modeling and analysis, we identify deformation in the PDMS inlet port region as the dominant contributor to the stored extra fluid volume. By regulating the flow resistance of the tubing relative to that of the outlet channel, the stored extra fluid volume can be preferentially released forward through the outlet or backward through the inlet tubing, enabling rapid flow stopping across configurations with 500, 250, and 100 m outlets. Furthermore, by supporting the PDMS membrane beneath the inlet region with a rigid glass substrate and reducing its dimensions, the hydraulic compliance and consequently the stored extra fluid volume are significantly reduced. With these strategies, microparticles with well-defined boundaries can be fabricated at short, flow-stopping, delay times, and the flow profiles obtained in multi-inlet systems can be preserved during flow stopping and transferred into particle patterns.
ER -