Estimation of Very High Energy Electron (VHEE) beam parameters using an in-air screen
Abstract
Very high energy electron (VHEE) beams offer several promising properties for radiotherapy. Accurate beam delivery requires a beam model that accounts for scattering along the beam propagation path. This work develops and validates a beam model incorporating Multiple Coulomb Scattering (MCS) to estimate beam parameters. MCS is incorporated as an additive term to the covariance matrix transformation for a drift space, allowing conventional quadrupole scans to estimate beam parameters in the presence of a downstream scatterer. The scattering correction factor is fitted to Monte Carlo (MC) simulations for a range of materials and thicknesses. The model is then validated by recovering the initial beam parameters from simulated quadrupole scans of a realistic beamline. Finally, the method is applied to in-air screen measurements at the Pulsed Energetic Electrons for Research (PEER) end station of the Australian Synchrotron. After fitting the correction factors, the mean and standard deviation of the estimation errors for the final emittance, diameter, divergence, and mean kinetic energy were (−0.06 ± 3.17)%, (0.15 ± 0.66)%, (0.18 ± 2.18)%, and (−0.03 ± 0.06)%, respectively. Simulated quadrupole scans successfully recovered the initial beam parameters, with errors of at most 13%. PEER measurements yielded emittance estimates ranging from $0.238$ to 1.753 mm mrad across scans, which were within the expected range. Following an initial quadrupole scan, the method allows the in-air beam size to be estimated for other quadrupole configurations. Further work is required to improve the consistency and reliability of the experimental estimates.
Related
- Anthropomorphic phantom dosimetry and validation of 150–200 MeV very high-energy electron radiotherapy at CERN
- Platinum Nanoparticle Radioenhancement is Preserved Under FLASH Very High-Energy Electron Irradiation: An in vitro Tumor Spheroid Study
- Development of a continuous-wave photocathode very-high-frequency electron gun for S3FEL
- Cosmic Ray Diffusion and the Origin of Very High Energy Gamma-Ray Emission in Young Massive Stellar Clusters
- Toward dynamic Monte Carlo source modeling: measurement variability and primary electron source-width sensitivity in very small photon fields
BibTeX
@misc{valerian2026estimation,
title = {{Estimation of Very High Energy Electron (VHEE) beam parameters using an in-air screen}},
author = {Joel Valerian and Paul Giansiracusa and Vincent Lu and Paarangat Pushkarna and Roger Rassool and Suzie Lyn Sheehy and Yaw-Ren Eugene Tan and Matteo Volpi},
howpublished = {arXiv},
year = {2026},
month = nov,
doi = {10.48550/arxiv.2611.05973},
eprint = {2611.05973},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2611.05973},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - UNPB
TI - Estimation of Very High Energy Electron (VHEE) beam parameters using an in-air screen
AU - Joel Valerian
AU - Paul Giansiracusa
AU - Vincent Lu
AU - Paarangat Pushkarna
AU - Roger Rassool
AU - Suzie Lyn Sheehy
AU - Yaw-Ren Eugene Tan
AU - Matteo Volpi
PY - 2026
DA - 2026/11/04
PB - arXiv
DO - 10.48550/arxiv.2611.05973
UR - https://arxiv.org/abs/2611.05973
AB - Very high energy electron (VHEE) beams offer several promising properties for radiotherapy. Accurate beam delivery requires a beam model that accounts for scattering along the beam propagation path. This work develops and validates a beam model incorporating Multiple Coulomb Scattering (MCS) to estimate beam parameters. MCS is incorporated as an additive term to the covariance matrix transformation for a drift space, allowing conventional quadrupole scans to estimate beam parameters in the presence of a downstream scatterer. The scattering correction factor is fitted to Monte Carlo (MC) simulations for a range of materials and thicknesses. The model is then validated by recovering the initial beam parameters from simulated quadrupole scans of a realistic beamline. Finally, the method is applied to in-air screen measurements at the Pulsed Energetic Electrons for Research (PEER) end station of the Australian Synchrotron. After fitting the correction factors, the mean and standard deviation of the estimation errors for the final emittance, diameter, divergence, and mean kinetic energy were (−0.06 ± 3.17)%, (0.15 ± 0.66)%, (0.18 ± 2.18)%, and (−0.03 ± 0.06)%, respectively. Simulated quadrupole scans successfully recovered the initial beam parameters, with errors of at most 13%. PEER measurements yielded emittance estimates ranging from $0.238$ to 1.753 mm mrad across scans, which were within the expected range. Following an initial quadrupole scan, the method allows the in-air beam size to be estimated for other quadrupole configurations. Further work is required to improve the consistency and reliability of the experimental estimates.
ER -