Skip to content
DraconiticResearch
Search Sources API
182,469 studies31 sourcesUpdated 37 min ago
PreprintCC BY 4.0arXiv

Structural effects of liquid infiltration of 3Y-Zirconia with Sc, Mg and Y

Abstract

The current work has investigated the effect of co-doping 3Y-Zirconia (3YSZ) with Sc, Mg and Y by wet infiltration. Pre-sintered discs of 3YSZ were immersed in diluted nitric acid solutions containing Sc, Mg or Y, and combinations of the three, trapping liquid within the porosities of the samples. Upon drying, the cations are maintained inside the pellet, making the basis for the co-doping. After sintering, mass increase confirms the co-doping effect and X-ray diffraction analysis show clear variations in atomic structure depending on the doping element. Rietveld refinements show that the wet-infiltrated samples contain the tetragonal t, t double prime and cubic c-phase in various fractions depending on the doping elements. Sc-infiltrated samples show a tendency to higher tetragonality, while the Mg-infiltrated sample obtained a single cubic phase. The multi-phase wet-infiltrated samples have a similar phase separation after sintering as 5Y-Zirconia (5YSZ), as calculated by the tetragonality deviation parameter. 3YSZ and 5YSZ sintered for 0 hours and 2 hours at 1500 degrees C show the effect of sintering time on the phase segregation. To evaluate the material properties in an application-based perspective, the Knoop hardness, translucency and grain size was measured. We conclude that liquid infiltration is a viable route to perform co-doping of Zirconia with various co-doping elements.

Related

  1. Structural Determination vs Stochastic Events: Relaxation Dynamics in a Supercooled Liquid
    Shivam Mahajan, Peter Harrowell, Massimo Pica Ciamarra
    arXivPreprintCC BY 4.0Full textCondensed matterarXiv
  2. High-temperature mechanical spectroscopy of yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) with different amounts of intergranular phase
    L. Donzel, Egle Conforto, R. Schaller
    Acta MaterialiaPeer-reviewedCC BY 4.0Full text11 citedCondensed matterHAL
  3. Ultrafast firing effects in Y-doped zirconia nanoparticles: Heating rate matters even under “Conventional” conditions
    Mattia Biesuz, Etienne Martin, Levent Karacasulu +4
    Journal of the European Ceramic SocietyPeer-reviewedCC BY 4.0Full textGeneral biologyGeneral chemistryHAL
  4. Leveraging rapid sintering to retain metastable zirconia in copper
    Wangshu Zheng, Xi Chen, Xuyang Feng +6
    arXivPreprintarXiv licenceFull textCondensed matterarXiv
  5. Correlations of Spectroscopic and Dielectric Properties of Hafnia-Zirconia Nanoparticles
    Yuriy O. Zagorodniy, Eugene A. Eliseev, Petr Jiricek +11
    arXivPreprintarXiv licenceFull textCondensed matterarXiv
BibTeX
@misc{fjellvag2026structural,
  title = {{Structural effects of liquid infiltration of 3Y-Zirconia with Sc, Mg and Y}},
  author = {Asbjørn Slagtern Fjellvåg and Øystein Slagtern Fjellvåg and Amund Ruud},
  howpublished = {arXiv},
  year = {2026},
  month = nov,
  doi = {10.48550/arxiv.2605.05364},
  eprint = {2605.05364},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2605.05364},
  note = {CC BY 4.0},
}
RIS
TY  - UNPB
TI  - Structural effects of liquid infiltration of 3Y-Zirconia with Sc, Mg and Y
AU  - Asbjørn Slagtern Fjellvåg
AU  - Øystein Slagtern Fjellvåg
AU  - Amund Ruud
PY  - 2026
DA  - 2026/11/03
PB  - arXiv
DO  - 10.48550/arxiv.2605.05364
UR  - https://arxiv.org/abs/2605.05364
AB  - The current work has investigated the effect of co-doping 3Y-Zirconia (3YSZ) with Sc, Mg and Y by wet infiltration. Pre-sintered discs of 3YSZ were immersed in diluted nitric acid solutions containing Sc, Mg or Y, and combinations of the three, trapping liquid within the porosities of the samples. Upon drying, the cations are maintained inside the pellet, making the basis for the co-doping. After sintering, mass increase confirms the co-doping effect and X-ray diffraction analysis show clear variations in atomic structure depending on the doping element. Rietveld refinements show that the wet-infiltrated samples contain the tetragonal t, t double prime and cubic c-phase in various fractions depending on the doping elements. Sc-infiltrated samples show a tendency to higher tetragonality, while the Mg-infiltrated sample obtained a single cubic phase. The multi-phase wet-infiltrated samples have a similar phase separation after sintering as 5Y-Zirconia (5YSZ), as calculated by the tetragonality deviation parameter. 3YSZ and 5YSZ sintered for 0 hours and 2 hours at 1500 degrees C show the effect of sintering time on the phase segregation. To evaluate the material properties in an application-based perspective, the Knoop hardness, translucency and grain size was measured. We conclude that liquid infiltration is a viable route to perform co-doping of Zirconia with various co-doping elements.
ER  -