Methods for measuring stratigraphic attitude and true thickness based on high-precision 3D real-scene models: A case study of the early Silurian Chongqing Lagerstätte Section, China
- 1Chongqing Key Laboratory of Resource and Environmental Effects of Major Geological Events (Chongqing Institute of Geology and Mineral Resources), Chongqing, China
Abstract
Accurate measurement of stratigraphic attitude and true thickness is critical to geological exploration, mineral resource assessment, and geological disaster prevention. Traditional measurement methods are limited by accuracy and field conditions. With the development of high-precision 3d real-scene modeling technologies, a new solution for these measurements has emerged. This study aims to use high-precision 3D real-scene models to measure stratigraphic attitude and true thickness, and to validate the reliability and practicality. First, high-precision 3D real-scene models were constructed using UAV oblique photography data. Then, we can calculate the normal vector based on three non-collinear points on a plane. We can calculate the attitude and equation of this plane based on the normal vector. The true thickness of strata between two planes was calculated using the formula for the distance from any point on another plane in space to the plane equation. Finally, the methods used to measure the fish fossil-bearing section in Xiushan, Chongqing, China. So, we used this new method to measure 80 stratigraphic joint attitudes and the true thickness of 7 strata. Then, we compared these measurements with 20 stratigraphic joint attitudes and the true thickness of the same 7 strata that we got using traditional methods. The results show that stratigraphic attitude and true thickness obtained using high-precision 3D real-scene models are reliable, and this method can overcome the limitations of traditional measurement methods. This study provides a new method for measuring stratigraphic attitude and true thickness, with good application potential and practical value.
Related
- Using remote sensing to monitor vegetation recovery after extreme climate events in Chongqing, China
- Association of temporal and masseter muscle thickness with cognitive function and clinical severity in Alzheimer’s disease: a retrospective study
- Collider bias in the association of periodontitis and carotid intima-media thickness
- From Exposure to Experience: Measuring Gaze-Based Visual Experience with Faces During Naturalistic Viewing
- Measuring satellite arrays of the human Y chromosome from sequencing reads
BibTeX
@article{zhang2026methods,
title = {{Methods for measuring stratigraphic attitude and true thickness based on high-precision 3D real-scene models: A case study of the early Silurian Chongqing Lagerstätte Section, China}},
author = {Ruigang Zhang and Zhiwei Cui and Yang Chen and Jinhua Luan and Xiong Zhang and Dan Zhou and Deju Zhang and Haitong Zhao and Zhengqin Gan and Xinzhe Liu},
journal = {PLOS One},
year = {2026},
month = sep,
doi = {10.1371/journal.pone.0358199},
url = {https://doi.org/10.1371/journal.pone.0358199},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Methods for measuring stratigraphic attitude and true thickness based on high-precision 3D real-scene models: A case study of the early Silurian Chongqing Lagerstätte Section, China
AU - Ruigang Zhang
AU - Zhiwei Cui
AU - Yang Chen
AU - Jinhua Luan
AU - Xiong Zhang
AU - Dan Zhou
AU - Deju Zhang
AU - Haitong Zhao
AU - Zhengqin Gan
AU - Xinzhe Liu
PY - 2026
DA - 2026/09/18
JO - PLOS One
DO - 10.1371/journal.pone.0358199
UR - https://doi.org/10.1371/journal.pone.0358199
AB - Accurate measurement of stratigraphic attitude and true thickness is critical to geological exploration, mineral resource assessment, and geological disaster prevention. Traditional measurement methods are limited by accuracy and field conditions. With the development of high-precision 3d real-scene modeling technologies, a new solution for these measurements has emerged. This study aims to use high-precision 3D real-scene models to measure stratigraphic attitude and true thickness, and to validate the reliability and practicality. First, high-precision 3D real-scene models were constructed using UAV oblique photography data. Then, we can calculate the normal vector based on three non-collinear points on a plane. We can calculate the attitude and equation of this plane based on the normal vector. The true thickness of strata between two planes was calculated using the formula for the distance from any point on another plane in space to the plane equation. Finally, the methods used to measure the fish fossil-bearing section in Xiushan, Chongqing, China. So, we used this new method to measure 80 stratigraphic joint attitudes and the true thickness of 7 strata. Then, we compared these measurements with 20 stratigraphic joint attitudes and the true thickness of the same 7 strata that we got using traditional methods. The results show that stratigraphic attitude and true thickness obtained using high-precision 3D real-scene models are reliable, and this method can overcome the limitations of traditional measurement methods. This study provides a new method for measuring stratigraphic attitude and true thickness, with good application potential and practical value.
SN - 1932-6203
ER -