Functional Performance of Electrospun Tissue-Engineered Heart Valve Scaffolds Across Geometries Under Aortic Conditions
- 1Physikalisch-Technische Bundesanstalt (PTB)
Abstract
Electrospun, bioresorbable polymer scaffolds represent a compelling platform for tissue-engineered heart valves (TEHVs) owing to their fibrous microstructure, tunable mechanics and inherent capacity to support host-cell infiltration and remodeling. While recent in-vitro parametric studies of bioprosthetic heart valve (BHV) geometry have used silicone cast valves and Doppler echocardiography to link design parameters to hemodynamic performance and leaflet strain, the characterization of the functional behavior of electrospun whole-valve TEHV scaffolds across clinically relevant aortic conditions and across distinct leaflet geometries remains limited. Here, we present an end-to-end workflow in which polycaprolactone (PCL) is electrospun directly onto parametrized, 3D-printed mandrels derived from two established analytical leaflet geometry models, yielding 21 whole-valve scaffolds across five geometries without cutting or suturing of flat fiber sheets. Fiber diameter, orientation and scaffold porosity were assessed by scanning electron microscopy and confirmed to be consistent across scaffolds and geometries. A subset of 8 scaffolds were tested in a pulse duplicator under hypotensive, normotensive and hypertensive aortic conditions, achieving a mean geometric orifice area of 44.51% of the total valve area and demonstrating physiological opening and closing behavior throughout. These results emphasize electrospun whole-valve TEHVs as hemodynamically competent constructs at clinically relevant aortic conditions and provide a reproducible, geometry-driven fabrication and evaluation framework to further support their translation toward regenerative heart valve replacement.
Related
- Effects of exercise therapy on balance, functional performance, and fall-related outcomes in community-dwelling older adults with chronic conditions: a systematic review and meta-analysis
- Stimulatrix: An open-source automated platform for high-throughput functional characterization of engineered contractile tissues
- Engineered trophoblast organoids recapitulate molecular and functional features of preeclampsia
- Analytical and functional clearance of dsRNA contaminants from in vitro transcribed mRNA by an engineered dsRNA-binding protein
- Harnessing engineered laccase and functional carrier materials for efficient dye degradation: From mechanism to application.
BibTeX
@misc{dillinger2026functional,
title = {{Functional Performance of Electrospun Tissue-Engineered Heart Valve Scaffolds Across Geometries Under Aortic Conditions}},
author = {H. Dillinger and A. Saberi and M. Manenti and I. v. d. Burgh-Vrees and C. Bouten},
howpublished = {bioRxiv},
year = {2026},
month = oct,
doi = {10.64898/2026.10.13.758926},
url = {https://www.biorxiv.org/content/10.64898/2026.10.13.758926v1},
note = {CC BY-NC},
}
RIS
TY - UNPB
TI - Functional Performance of Electrospun Tissue-Engineered Heart Valve Scaffolds Across Geometries Under Aortic Conditions
AU - H. Dillinger
AU - A. Saberi
AU - M. Manenti
AU - I. v. d. Burgh-Vrees
AU - C. Bouten
PY - 2026
DA - 2026/10/13
PB - bioRxiv
DO - 10.64898/2026.10.13.758926
UR - https://www.biorxiv.org/content/10.64898/2026.10.13.758926v1
AB - Electrospun, bioresorbable polymer scaffolds represent a compelling platform for tissue-engineered heart valves (TEHVs) owing to their fibrous microstructure, tunable mechanics and inherent capacity to support host-cell infiltration and remodeling. While recent in-vitro parametric studies of bioprosthetic heart valve (BHV) geometry have used silicone cast valves and Doppler echocardiography to link design parameters to hemodynamic performance and leaflet strain, the characterization of the functional behavior of electrospun whole-valve TEHV scaffolds across clinically relevant aortic conditions and across distinct leaflet geometries remains limited. Here, we present an end-to-end workflow in which polycaprolactone (PCL) is electrospun directly onto parametrized, 3D-printed mandrels derived from two established analytical leaflet geometry models, yielding 21 whole-valve scaffolds across five geometries without cutting or suturing of flat fiber sheets. Fiber diameter, orientation and scaffold porosity were assessed by scanning electron microscopy and confirmed to be consistent across scaffolds and geometries. A subset of 8 scaffolds were tested in a pulse duplicator under hypotensive, normotensive and hypertensive aortic conditions, achieving a mean geometric orifice area of 44.51% of the total valve area and demonstrating physiological opening and closing behavior throughout. These results emphasize electrospun whole-valve TEHVs as hemodynamically competent constructs at clinically relevant aortic conditions and provide a reproducible, geometry-driven fabrication and evaluation framework to further support their translation toward regenerative heart valve replacement.
ER -