Introduction of vegetal particles into an insulating mineral foam for building application
Abstract
Building insulation is currently one of the biggest challenges to reduce energy consumption and by extension the human impact on Environment. In order to reduce this impact, the manufacturing of the building materials is of importance. This paper investigates the feasibility of incorporating vegetal particles into a low carbon mineral foam and evaluates their influence on the fresh and hardened properties relevant for building insulation applications. The insulating foam, made of lime, sulfo aluminous cement, and limestone clay fine, is produced by a direct foaming method and aims at having a thermal conductivity lower 0.065 W/m/K combined with a compressive strength higher than 0.2 MPa. Therefore, in this research, vegetal particles of hemp, flax and miscanthus were added in order to evaluate the feasibility of such a mixture and determine their impacts on the mineral foam. Plant-based particles, as in vegetal concretes, tend to decrease mechanical strength but allow similar foamability. In addition, mineral foam with vegetal particles exhibits better hygroscopic properties (+ 28% of moisture buffer value and between 35% and 74% of water permeability). The main benefit of the inclusion of vegetal particles is environmental, in fact, incorporating hemp shives reduced the carbon footprint by more than 35%. Hightlights. • Thermal conductivity of the studied foams reaches until 0.053 W/m/K; • An excellent moisture buffer value is achieved (average: 2.07 g/(m²·%RH)); • A foam was designed with a carbon footprint of 10.63 KgCO 2 eq/m 3 .
Related
- Properties of Charges Conjugated Polymers Deposited by Electrospraying on substrates with an insulating Oxide layer
- Scalable Fabrication of Lightweight, Thermally Insulating and Ablation-Resistant SiC/SiOC Hybrid Aerogel Composites Reinforced with High-Porosity Needle-Punched Quartz Fiber Felts
- Integrated Toxicological, Network Toxicology, and Molecular Simulation Assessment of Inhalation Toxicity and Mechanisms of HFO-1336mzz(E) as an SF6 Alternative Insulating Gas
- Introduction to magnetic nanoparticles: from Massart method to a cascade of innovations
- Method for Measuring Solid-State Diffusivity: Part 1. Theoretical Introduction
BibTeX
@article{croo2026introduction,
title = {{Introduction of vegetal particles into an insulating mineral foam for building application}},
author = {Matthieu Croo and Vincent Dubois and Alain Bataille and Sana Khaled and Eric Wirquin},
journal = {Discover Materials},
year = {2026},
month = sep,
doi = {10.1007/s43939-026-00943-6},
url = {https://hal.science/hal-05764536v1},
note = {CC BY},
}
RIS
TY - JOUR
TI - Introduction of vegetal particles into an insulating mineral foam for building application
AU - Matthieu Croo
AU - Vincent Dubois
AU - Alain Bataille
AU - Sana Khaled
AU - Eric Wirquin
PY - 2026
DA - 2026/09/11
JO - Discover Materials
DO - 10.1007/s43939-026-00943-6
UR - https://hal.science/hal-05764536v1
AB - Building insulation is currently one of the biggest challenges to reduce energy consumption and by extension the human impact on Environment. In order to reduce this impact, the manufacturing of the building materials is of importance. This paper investigates the feasibility of incorporating vegetal particles into a low carbon mineral foam and evaluates their influence on the fresh and hardened properties relevant for building insulation applications. The insulating foam, made of lime, sulfo aluminous cement, and limestone clay fine, is produced by a direct foaming method and aims at having a thermal conductivity lower 0.065 W/m/K combined with a compressive strength higher than 0.2 MPa. Therefore, in this research, vegetal particles of hemp, flax and miscanthus were added in order to evaluate the feasibility of such a mixture and determine their impacts on the mineral foam. Plant-based particles, as in vegetal concretes, tend to decrease mechanical strength but allow similar foamability. In addition, mineral foam with vegetal particles exhibits better hygroscopic properties (+ 28% of moisture buffer value and between 35% and 74% of water permeability). The main benefit of the inclusion of vegetal particles is environmental, in fact, incorporating hemp shives reduced the carbon footprint by more than 35%. Hightlights. • Thermal conductivity of the studied foams reaches until 0.053 W/m/K; • An excellent moisture buffer value is achieved (average: 2.07 g/(m²·%RH)); • A foam was designed with a carbon footprint of 10.63 KgCO 2 eq/m 3 .
SN - 2730-7727
ER -