Skip to content
DraconiticResearch
Search Sources API
197,768 studies31 sourcesUpdated 41 min ago
Peer-reviewedCC BY 4.0Batteries

Optimal Sizing of a Renewable Hybrid Power System in a Standalone House Considering Vehicle-to-Home Integration

  • Golsa Azarbakhsh1
  • Amin Mahmoudi1
  • Solmaz Kahourzade2
  • Amirmehdi Yazdani3
  • Md Apel Mahmud1
  1. 1College of Science and Engineering, Flinders University, Adelaide, SA 5042, Australia
  2. 2School of Electrical and Mechanical Engineering, College of Engineering and Information Technology, Adelaide University, Adelaide, SA 5095, Australia
  3. 3School of Engineering and Energy, Murdoch University, Perth, WA 6150, Australia
Open at sourceDOICite

Abstract

This paper presents the optimal sizing of wind turbine (WT), photovoltaic (PV) and battery energy storage system (BES) for standalone houses with electric vehicles (EVs) by considering vehicle-to-home (V2H) operation. To minimise the net present cost (NPC) and levelised cost of energy (LCOE) over the project lifespan for residential households, particle swarm optimisation (PSO) is utilised, and a demand-side management (DSM) is implemented. Stochastic functions are used to investigate the uncertainties regarding the availability of EVs based on arrival and departure times and initial state of charge (SOC). The study evaluates three configurations: PV-BES-EV, WT-BES-EV, and PV-WT-BES-EV. A fuzzy-logic-based DSM strategy is developed to perform load shifting using the SOC of the EV, and BES with day-ahead forecasts of WT and PV generation. Results show that when V2H and DSM are incorporated, all configurations experience reductions in required battery capacity and hence system cost. The proposed hybrid power system also results in substantial CO2 emission reduction compared with existing studies for standalone houses in remote areas.

Related

  1. AI-Enabled Battery Storage and Electric Vehicle Flexibility for Power-Quality-Constrained Photovoltaic Integration: A Critical Review
    Amr S. Zalhaf, Hongzhi Jiang, Yang Han +4
    BatteriesPeer-reviewedCC BY 4.0Electrochemistry & energyCrossref
  2. Standalone nanocarbon photocatalyst for a complete and fast photodegradation of PFOA to fluorine ions under solar-type illumination
    Rafaël Jimenez, Caroline Genre, Charlène Boillereau +3
    CarbonPeer-reviewedCC BY 4.0Full textEnvironmental chemistryHAL
  3. Renewable-compatible urea electrosynthesis enabled by dynamic asymmetric catalytic domains
    Yuntong Sun, Denian Wang, Xiaoyuan Zhang +12
    Nature CommunicationsPeer-reviewedCC BY-NC-ND 4.0Full textElectrochemistry & energyCrossref
  4. A dynamic electrochemical impedance spectroscopy extraction method for PEM water electrolyzers considering time resolution
    Xin Wang, Zhongliang Li, Zhixue Zheng +1
    Applied EnergyPeer-reviewedHAL deposit licenceFull textGeneral chemistryHAL
  5. Decarbonizing isolated power systems: The role of renewable sources, storage and grid expansion
    Elia Perelli, Elena Rozzi, Paolo Marocco +1
    ChemRxivPreprintCC BYFull textGeneral chemistryChemRxiv

Cite

BibTeXRIS
BibTeX
@article{azarbakhsh2026optimal,
  title = {{Optimal Sizing of a Renewable Hybrid Power System in a Standalone House Considering Vehicle-to-Home Integration}},
  author = {Golsa Azarbakhsh and Amin Mahmoudi and Solmaz Kahourzade and Amirmehdi Yazdani and Md Apel Mahmud},
  journal = {Batteries},
  year = {2026},
  month = oct,
  doi = {10.3390/batteries12100406},
  url = {https://www.mdpi.com/2313-0105/12/10/406},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Optimal Sizing of a Renewable Hybrid Power System in a Standalone House Considering Vehicle-to-Home Integration
AU  - Golsa Azarbakhsh
AU  - Amin Mahmoudi
AU  - Solmaz Kahourzade
AU  - Amirmehdi Yazdani
AU  - Md Apel Mahmud
PY  - 2026
DA  - 2026/10/08
JO  - Batteries
DO  - 10.3390/batteries12100406
UR  - https://www.mdpi.com/2313-0105/12/10/406
AB  - This paper presents the optimal sizing of wind turbine (WT), photovoltaic (PV) and battery energy storage system (BES) for standalone houses with electric vehicles (EVs) by considering vehicle-to-home (V2H) operation. To minimise the net present cost (NPC) and levelised cost of energy (LCOE) over the project lifespan for residential households, particle swarm optimisation (PSO) is utilised, and a demand-side management (DSM) is implemented. Stochastic functions are used to investigate the uncertainties regarding the availability of EVs based on arrival and departure times and initial state of charge (SOC). The study evaluates three configurations: PV-BES-EV, WT-BES-EV, and PV-WT-BES-EV. A fuzzy-logic-based DSM strategy is developed to perform load shifting using the SOC of the EV, and BES with day-ahead forecasts of WT and PV generation. Results show that when V2H and DSM are incorporated, all configurations experience reductions in required battery capacity and hence system cost. The proposed hybrid power system also results in substantial CO2 emission reduction compared with existing studies for standalone houses in remote areas.
SN  - 2313-0105
ER  -