Effect of infill density and geometry of direct ink written 3D Ni-based electrodes on their oxygen evolution reaction performance
Abstract
In this work, Direct Ink Writing (DIW) is used to develop novel complex 3D electrodes for water splitting, specifically for the oxygen evolution reaction (OER). The main advantages of using 3D electrodes for this application are to maximise catalyst surface area and facilitate gas products evacuation. High-solids-load (79 wt%), water-based pastes based on micrometer Ni powders were processed by a sequence of DIW, sintering and NiFe electrodeposition. Three different complex geometries, i.e., two rectilinear infills (40% and 55% infill density) and one gyroid infill (50% infill density), were developed as proof of concept to determine the influence of the electrode design on the OER performance. The study has demonstrated that lower infill rates (40% rectilinear infill) clearly enable OER efficiency optimisation. In addition to the higher mesh size, the superior performance of this particular electrode is enhanced by the filament orientation at 45° to the gravity vector, which facilitates buoyancy-driven bubble release, and by the inner porosity of the filaments, which is expected to favour the electrode wettability and aerophobicity.
Related
- Perovskite‐Based Catalysts for the Oxygen Evolution Reaction: Synthesis, Device Relevant Performance, and Scale‐Up Strategies
- Controlling metastability through annealing of high-entropy nanoalloy electrocatalysts to boost performance towards the oxygen evolution reaction
- Recent Progress in NiFe-LDH Electrocatalysts: Synthesis, Mechanisms, and Performance in the Oxygen Evolution Reaction
- Enhancing the performance of nickel-cobalt selenide electrocatalyst on hydrochar support for oxygen evolution reaction
- Structuring High-Entropy Oxides at the Nanoscale: Ordered Mesoporous (CrMnFeCoNi)Ox Thin Films for High-Performance Oxygen Evolution Reaction Catalysis
BibTeX
@article{rodriguezlagar2026effect,
title = {{Effect of infill density and geometry of direct ink written 3D Ni-based electrodes on their oxygen evolution reaction performance}},
author = {Pablo Rodríguez-Lagar and Clara Blanco and Ricardo Santamaría and J. Angel Menéndez and Miguel A. Montes-Morán and Victoria G. Rocha},
journal = {Scientific Reports},
year = {2026},
month = oct,
doi = {10.1038/s41598-026-76008-8},
url = {https://www.nature.com/articles/s41598-026-76008-8},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Effect of infill density and geometry of direct ink written 3D Ni-based electrodes on their oxygen evolution reaction performance
AU - Pablo Rodríguez-Lagar
AU - Clara Blanco
AU - Ricardo Santamaría
AU - J. Angel Menéndez
AU - Miguel A. Montes-Morán
AU - Victoria G. Rocha
PY - 2026
DA - 2026/10/20
JO - Scientific Reports
DO - 10.1038/s41598-026-76008-8
UR - https://www.nature.com/articles/s41598-026-76008-8
AB - In this work, Direct Ink Writing (DIW) is used to develop novel complex 3D electrodes for water splitting, specifically for the oxygen evolution reaction (OER). The main advantages of using 3D electrodes for this application are to maximise catalyst surface area and facilitate gas products evacuation. High-solids-load (79 wt%), water-based pastes based on micrometer Ni powders were processed by a sequence of DIW, sintering and NiFe electrodeposition. Three different complex geometries, i.e., two rectilinear infills (40% and 55% infill density) and one gyroid infill (50% infill density), were developed as proof of concept to determine the influence of the electrode design on the OER performance. The study has demonstrated that lower infill rates (40% rectilinear infill) clearly enable OER efficiency optimisation. In addition to the higher mesh size, the superior performance of this particular electrode is enhanced by the filament orientation at 45° to the gravity vector, which facilitates buoyancy-driven bubble release, and by the inner porosity of the filaments, which is expected to favour the electrode wettability and aerophobicity.
SN - 2045-2322
ER -