Aloe vera-PDMS blend thin films with combined triboelectric and polarization mechanisms for wearable energy harvesting
Abstract
The development of flexible and sustainable self-powered electronics has driven interest in high-performance triboelectric nanogenerators (TENGs). In this work, Aloe vera (Av) juice was directly incorporated into a polydimethylsiloxane (PDMS) matrix (5–40 wt%) to enhance the dielectric and polarization properties of the bulk material, representing a bio-derived blend system approach distinct from conventional layered Aloe vera–based devices. The polar and ionic constituents of Aloe vera improve dipolar and interfacial polarization, leading to enhanced charge storage and electrical output. The optimized 35 wt% Av–PDMS blend film exhibited a peak-to-peak open-circuit voltage of 61 V, an approximately nine-fold increase over pristine PDMS (6.8 V), along with a short-circuit current of 7.13 µA and a maximum power density of 55.8 mW m⁻² under quantized excitation. The device maintained stable performance over 10,000 tapping cycles and 5,000 bending and stretching cycles and successfully powered low-power electronic devices via a 4.7 µF capacitor. These results demonstrate that bio-derived dielectric engineering through direct Aloe vera incorporation is an effective strategy for improving the performance and durability of flexible TENGs for wearable and self-powered applications.
Related
- Synergistic effects and molecular mechanisms of pirfenidone combined with EGFR-TKIs in non-small cell lung cancer
- Long-term clinical experience with a 3-step combined technique for involutional lower eyelid entropion and ectropion based on common pathophysiologic mechanisms
- Single-cell RNA sequencing combined with artificial intelligence to uncover immunotherapy biomarkers and decipher drug resistance mechanisms in glioblastoma.
- Exploring immunotherapy resistance in bone metastasis: mechanisms and optimization of combined treatment strategies-a narrative review.
- Single-cell and spatial multi-omics combined with machine learning to unravel the heterogeneity of cholangiocarcinoma and the WFDC3-mediated prognostic regulatory mechanisms
BibTeX
@article{panicker2026aloe,
title = {{Aloe vera-PDMS blend thin films with combined triboelectric and polarization mechanisms for wearable energy harvesting}},
author = {Swathy S. Panicker and Sreenidhi Prabha Rajeev and Vinoy Thomas},
journal = {Scientific Reports},
year = {2026},
month = oct,
doi = {10.1038/s41598-026-73709-y},
url = {https://www.nature.com/articles/s41598-026-73709-y},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Aloe vera-PDMS blend thin films with combined triboelectric and polarization mechanisms for wearable energy harvesting
AU - Swathy S. Panicker
AU - Sreenidhi Prabha Rajeev
AU - Vinoy Thomas
PY - 2026
DA - 2026/10/07
JO - Scientific Reports
DO - 10.1038/s41598-026-73709-y
UR - https://www.nature.com/articles/s41598-026-73709-y
AB - The development of flexible and sustainable self-powered electronics has driven interest in high-performance triboelectric nanogenerators (TENGs). In this work, Aloe vera (Av) juice was directly incorporated into a polydimethylsiloxane (PDMS) matrix (5–40 wt%) to enhance the dielectric and polarization properties of the bulk material, representing a bio-derived blend system approach distinct from conventional layered Aloe vera–based devices. The polar and ionic constituents of Aloe vera improve dipolar and interfacial polarization, leading to enhanced charge storage and electrical output. The optimized 35 wt% Av–PDMS blend film exhibited a peak-to-peak open-circuit voltage of 61 V, an approximately nine-fold increase over pristine PDMS (6.8 V), along with a short-circuit current of 7.13 µA and a maximum power density of 55.8 mW m⁻² under quantized excitation. The device maintained stable performance over 10,000 tapping cycles and 5,000 bending and stretching cycles and successfully powered low-power electronic devices via a 4.7 µF capacitor. These results demonstrate that bio-derived dielectric engineering through direct Aloe vera incorporation is an effective strategy for improving the performance and durability of flexible TENGs for wearable and self-powered applications.
SN - 2045-2322
ER -