Experimental and DFT Investigation of Crystal Violet Biosorption by Taraxacum officinale Leaf Biomass
- 1Çankırı Karatekin University , , ,
- 2Sivas Cumhuriyet University , , ,
- 3Cumhuriyet University , , ,
Abstract
Leaf powder obtained from wild Taraxacum officinale was directly used as a biosorbent for the removal of Crystal Violet (CV), a widely used cationic dye, because the leaves are rich in fibers and minerals and have not previously been employed in their untreated form for biosorption. Standard instrumental analyses were employed for the identification of surface functional groups (FT-IR), imaging of surface morphology (FE-SEM), and elemental characterization (EDX). Adsorption was favored under alkaline conditions, reaching a maximum removal efficiency of 46.53% at pH 12, corresponding to an experimental adsorption capacity of 149.1 mg g–1, while adsorbent dosages between 100 and 200 mg were effective for dye removal. The untreated biomass surface exhibited adsorption-favoring grooves and stomata. Taraxacum officinale biomass exhibited a lignocellulosic structure, with carbon and oxygen contents of 54.26 and 42.46 at%, respectively. Adsorption equilibrium was best described by the nonlinear Langmuir model (R2 = 0.948), supporting monolayer adsorption onto a relatively homogeneous surface. The D–R model further supported a physicochemical adsorption mechanism. Frontier molecular orbital (FMO) and natural bond orbital (NBO) analyses were performed at the B3LYP/6-311++G** level in both gas and aqueous media to elucidate the electronic interactions between CV and the lignocellulosic surface.
Related
- Experimental investigation of ground fissure reactivation and differential deformation under layered groundwater pumping–recharge conditions
- Experimental investigation of a deep organic carbon cycling promoted by carbonate reduction in subduction zones
- Experimental investigation of creep failure behavior of sandstone with combined pore–fissure defects
- Experimental and theoretical investigation of methylene blue adsorption onto cupules of scales: entropy, free enthalpy, and internal energy insights from statistical physics modeling and full factorial design
- Mechanistic elucidation and temperature-dependent kinetics of gas phase OH radical reactions with myrtenal: a combined theoretical and experimental investigation
BibTeX
@article{eyupoglu2026experimental,
title = {{Experimental and DFT Investigation of Crystal Violet Biosorption by Taraxacum officinale Leaf Biomass}},
author = {Volkan Eyupoglu and Goncagül Serdaroğlu and Osman Çaylak and Muhammed Bora Akın and Serap Çetinkaya},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c08045},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08045/5459254/Experimental-and-DFT-Investigation-of-Crystal},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Experimental and DFT Investigation of Crystal Violet Biosorption by Taraxacum officinale Leaf Biomass
AU - Volkan Eyupoglu
AU - Goncagül Serdaroğlu
AU - Osman Çaylak
AU - Muhammed Bora Akın
AU - Serap Çetinkaya
PY - 2026
DA - 2026/10/27
JO - ACS Omega
DO - 10.1021/acsomega.6c08045
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08045/5459254/Experimental-and-DFT-Investigation-of-Crystal
AB - Leaf powder obtained from wild Taraxacum officinale was directly used as a biosorbent for the removal of Crystal Violet (CV), a widely used cationic dye, because the leaves are rich in fibers and minerals and have not previously been employed in their untreated form for biosorption. Standard instrumental analyses were employed for the identification of surface functional groups (FT-IR), imaging of surface morphology (FE-SEM), and elemental characterization (EDX). Adsorption was favored under alkaline conditions, reaching a maximum removal efficiency of 46.53% at pH 12, corresponding to an experimental adsorption capacity of 149.1 mg g–1, while adsorbent dosages between 100 and 200 mg were effective for dye removal. The untreated biomass surface exhibited adsorption-favoring grooves and stomata. Taraxacum officinale biomass exhibited a lignocellulosic structure, with carbon and oxygen contents of 54.26 and 42.46 at%, respectively. Adsorption equilibrium was best described by the nonlinear Langmuir model (R2 = 0.948), supporting monolayer adsorption onto a relatively homogeneous surface. The D–R model further supported a physicochemical adsorption mechanism. Frontier molecular orbital (FMO) and natural bond orbital (NBO) analyses were performed at the B3LYP/6-311++G** level in both gas and aqueous media to elucidate the electronic interactions between CV and the lignocellulosic surface.
SN - 2470-1343
ER -