Stabilization of Yih's Viscosity Jump Interface in a Channel
Abstract
Two immiscible viscous fluids in pressure-driven channel flow can be unstable through their interface when their viscosities differ, at arbitrarily small Reynolds number --- the instability Yih found in 1967. The unstable state is the interface itself: a curve inside the domain, separating the two fluids, whose displacement is governed by a partial differential equation of its own and which moves the fluid domain with it. Actuation is at one wall only, so the state to be controlled is reached across a fluid. We stabilize this interface at any rate below the limit set by the streamwise mean flow, by static feedback of the two velocity components of that wall, through a Fredholm backstepping transformation acting jointly on the two layers. The target is the two-fluid Stokes problem, shifted, with the transmission of stress between the fluids kept and the coupling of the interface into them removed. Two findings about the two-fluid spectrum carry the design: joined at the interface, the eigenvalue sequences of the two layers, which collide for a dense set of layer ratios when the layers are uncoupled, avoid each other uniformly, so no degeneracy has to be assigned; and the slowest mode left to viscosity is not a bulk mode but the capillary relaxation of the interface, whose rate is linear rather than quadratic in the wavenumber, which sets the band of actuated wavenumbers. The controller is tested on the nonlinear two-fluid channel, switched on against a saturated interfacial wave.
Related
- Mixing zone dynamics for the Saffman-Taylor instability with viscosity jump
- An Immersed Interface Method for Parabolic Interface Problems with Nonlinear Jump Conditions
- Fourier--Hankel Moment Recovery in Acoustic Scattering: Multichannel Stabilization and Radial Interface Resolution
- Boundary stabilization of a moving interface in a 2 × 2 weakly hyperbolic system of balance laws: application to continuous sedimentation
- Boundary stabilization of a moving interface in a 2 x 2 weakly hyperbolic system of balance laws: application to continuous sedimentation
BibTeX
@misc{krstic2026stabilization,
title = {{Stabilization of Yih's Viscosity Jump Interface in a Channel}},
author = {Miroslav Krstic},
howpublished = {arXiv},
year = {2026},
month = sep,
doi = {10.48550/arxiv.2609.22384},
eprint = {2609.22384},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2609.22384},
note = {CC BY 4.0},
}
RIS
TY - UNPB
TI - Stabilization of Yih's Viscosity Jump Interface in a Channel
AU - Miroslav Krstic
PY - 2026
DA - 2026/09/18
PB - arXiv
DO - 10.48550/arxiv.2609.22384
UR - https://arxiv.org/abs/2609.22384
AB - Two immiscible viscous fluids in pressure-driven channel flow can be unstable through their interface when their viscosities differ, at arbitrarily small Reynolds number --- the instability Yih found in 1967. The unstable state is the interface itself: a curve inside the domain, separating the two fluids, whose displacement is governed by a partial differential equation of its own and which moves the fluid domain with it. Actuation is at one wall only, so the state to be controlled is reached across a fluid. We stabilize this interface at any rate below the limit set by the streamwise mean flow, by static feedback of the two velocity components of that wall, through a Fredholm backstepping transformation acting jointly on the two layers. The target is the two-fluid Stokes problem, shifted, with the transmission of stress between the fluids kept and the coupling of the interface into them removed. Two findings about the two-fluid spectrum carry the design: joined at the interface, the eigenvalue sequences of the two layers, which collide for a dense set of layer ratios when the layers are uncoupled, avoid each other uniformly, so no degeneracy has to be assigned; and the slowest mode left to viscosity is not a bulk mode but the capillary relaxation of the interface, whose rate is linear rather than quadratic in the wavenumber, which sets the band of actuated wavenumbers. The controller is tested on the nonlinear two-fluid channel, switched on against a saturated interfacial wave.
ER -