Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 56 min ago
Peer-reviewedCC BY 4.0Polymers

Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials

5 affiliations
  1. 1State Key Laboratory of Intelligent Deep Metal Mining and Equipment, School of Civil Engineering, Shaoxing University, Shaoxing 312000, China
  2. 2Tongchuang Engineering Design Co., Ltd., Shaoxing 312000, China
  3. 3Zhejiang Jinggong Steel-Building Group Co., Ltd., Shaoxing 312000, China
  4. 4Key Laboratory of Modern Textile Technology Innovation Center (Jianhu Laboratory), Shaoxing 312030, China
  5. 5CSCEC Strait Science & Technology (Fujian) Co., Ltd., Fuzhou 350803, China

Abstract

Virgin and recycled polypropylene fibers (PPF and rPPF) can reinforce cement-based materials, but their surface inertness limits interfacial bonding. This review examines ultraviolet (UV)-induced surface modification, linking changes in surface chemistry, morphology and wettability with fiber integrity, interfacial behavior and composite performance. UV-induced photo-oxidation introduces polar functional groups and modifies surface morphology, potentially improving fiber–matrix compatibility and mechanical performance. However, these benefits depend on irradiation conditions, fiber characteristics and matrix composition. In one cement-paste study using 2 vol.% PPF, UV treatment increased 28-day compressive strength at room temperature by 24% and residual compressive strength after exposure to 200 °C by 18%, relative to specimens containing the same dosage of untreated PPF. For rPPF, pre-existing oxidation and recycling-related variability require treatment conditions tailored to its initial state. Excessive irradiation may degrade fiber properties, highlighting the need to balance surface functionalization with mechanical integrity. Limited mechanistic evidence, long-term performance data and standardized protocols remain key challenges. This review identifies the potential and limitations of UV modification and outlines research needs for its application to virgin and recycled polypropylene fibers in cement-based materials.

Related

  1. Functionalization of strong C(sp3)–H bonds in the presence of weak C(sp3)–H bonds enables the block-selective modification of thermoplastic elastomers
    Alexandra D. Handlin, Mark A. Nosiglia, Erik J. Alexanian +1
    Chemical sciencePeer-reviewedCC BY-NCFull textOrganic chemistryEurope PMC
  2. Recent Advances in Selective Modification of Tryptophan Residues in Peptides: From Site Functionalization to Skeletal Editing
    Zhongmin Yang, Yuyao Wang, Mengjia Cui +4
    MoleculesPeer-reviewedCC BY 4.0General chemistryCrossref
  3. Application and Research of Laser Manufacturing Technology in Nanomaterials
    Pei Zuo
    NanomaterialsPeer-reviewedCC BY 4.0Full textMaterials & polymersCrossrefDOAJ
  4. Reversible Ag-based electrodeposition electrochromic technology and its application in smart windows
    Dujiang Lu, Haikun Jiang, Jianzhi Liu +9
    RSC advancesPeer-reviewedCC BY-NCFull textMaterials & polymersEurope PMCDOAJ
  5. Using Polypropylene-Based End-of-Life Vehicle (ELV) Recyclates in Practice: Contaminant and Composition Effects on Performance
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
BibTeX
@article{wang2026ultravioletinduced,
  title = {{Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials}},
  author = {Jianfeng Wang and Peida Yang and Yang Zhao and Tianxiang Ren and Na Li and Ping Jiang and Haihua Zhan and Yonghui Zhang},
  journal = {Polymers},
  year = {2026},
  month = nov,
  doi = {10.3390/polym18222809},
  url = {https://www.mdpi.com/2073-4360/18/22/2809},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Ultraviolet-Induced Surface Modification of Virgin and Recycled Polypropylene Fibers: Modification Technology, Functionalization Mechanism and Its Application in Cement-Based Materials
AU  - Jianfeng Wang
AU  - Peida Yang
AU  - Yang Zhao
AU  - Tianxiang Ren
AU  - Na Li
AU  - Ping Jiang
AU  - Haihua Zhan
AU  - Yonghui Zhang
PY  - 2026
DA  - 2026/11/10
JO  - Polymers
DO  - 10.3390/polym18222809
UR  - https://www.mdpi.com/2073-4360/18/22/2809
AB  - Virgin and recycled polypropylene fibers (PPF and rPPF) can reinforce cement-based materials, but their surface inertness limits interfacial bonding. This review examines ultraviolet (UV)-induced surface modification, linking changes in surface chemistry, morphology and wettability with fiber integrity, interfacial behavior and composite performance. UV-induced photo-oxidation introduces polar functional groups and modifies surface morphology, potentially improving fiber–matrix compatibility and mechanical performance. However, these benefits depend on irradiation conditions, fiber characteristics and matrix composition. In one cement-paste study using 2 vol.% PPF, UV treatment increased 28-day compressive strength at room temperature by 24% and residual compressive strength after exposure to 200 °C by 18%, relative to specimens containing the same dosage of untreated PPF. For rPPF, pre-existing oxidation and recycling-related variability require treatment conditions tailored to its initial state. Excessive irradiation may degrade fiber properties, highlighting the need to balance surface functionalization with mechanical integrity. Limited mechanistic evidence, long-term performance data and standardized protocols remain key challenges. This review identifies the potential and limitations of UV modification and outlines research needs for its application to virgin and recycled polypropylene fibers in cement-based materials.
SN  - 2073-4360
ER  -