Effect of pulse targeting strategy on Er:YAG laser ablation rate and efficiency in ex vivo cancellous bone.
5 affiliations
- 1School of Biomedical Sciences, The University of Western Australia, Perth, Australia. [email protected].
- 2ArthroLase, Perth, Australia. [email protected].
- 3School of Biomedical Sciences, The University of Western Australia, Perth, Australia.
- 4ArthroLase, Perth, Australia.
- 5School of Physics, Mathematics and Computing, The University of Western Australia, Perth, Australia.
Abstract
Purpose
Lasers are an attractive alternative to mechanical tools for bone preparation, but clinical adoption is limited by low removal rates. This study investigated whether spatiotemporal sequencing of Er:YAG pulses can improve thermomechanical bone ablation, and how pulse separation and delivery order affect ablation rate, efficiency, and heating.Methods
A prototype Er:YAG system, with galvanometer scanning, ablated cancellous bone in eight ex vivo lamb femurs. Arm 1 varied the separation between consecutive pulses (0.175 to 0.275 mm). Arm 2 compared four targeting patterns within a fixed pulse grid, maintaining constant fluence and total energy for three of the four patterns. Thermal imaging and pre/post confocal scans quantified heating and volumetric removal.Results
Ablation rate was consistent across pulse separations (521 to 552mm³/min), while layer depth scaled linearly with deposited energy (R² = 0.94), decoupling depth control from throughput. Targeting strategy significantly affected ablation efficiency, ranging from 0.19-0.32mm³/J (p < 0.001). Hatching was fastest and most efficient, sustaining consistently high peak surface temperatures (200-250 °C) but lower mean surface temperatures than either scatter strategy.Conclusion
Ablation efficiency varied with pulse order under controlled conditions, indicating a dependence beyond single pulse dynamics. We propose inter-pulse thermal coupling, whereby residual heat from a preceding pulse lowers the energy required by the next. Optimising the targeting strategy achieved the fastest reported removal rate for cancellous bone, identifying pulse sequencing as a lever for more efficient ablation.
Related
- Pressure-Waveform Guidance for Pulmonary Vein Occlusion During Cryoballoon Ablation: Procedural Efficiency and Repeat-Procedure Findings from a Large Single-Center Cohort
- Percutaneous endomyocardial ablation as a septal reduction strategy in symptomatic obstructive hypertrophic cardiomyopathy: A 20-year single-center observational experience.
- Efgartigimod and Steroid Pulse Therapy as an Early Fast-acting Treatment Strategy for Anti-MUSK Myasthenic Crisis
- Emergency Pulsed-Field Ablation as a Bail-Out Strategy for Refractory Incessant VT
- 20-MHz high-intensity focused ultrasound for tattoo removal without pigment-specific optical targeting and with evidence for an ablation-associated transepidermal extrusion pathway
BibTeX
@article{withers2026effect,
title = {{Effect of pulse targeting strategy on Er:YAG laser ablation rate and efficiency in ex vivo cancellous bone.}},
author = {Sam Withers and Joshua Troy and Brett Robertson and Riaz Khan and Nathan Pavlos},
journal = {Lasers in medical science},
year = {2026},
month = oct,
doi = {10.1007/s10103-026-05075-0},
url = {https://europepmc.org/article/MED/42925325},
note = {CC BY},
}
RIS
TY - JOUR
TI - Effect of pulse targeting strategy on Er:YAG laser ablation rate and efficiency in ex vivo cancellous bone.
AU - Sam Withers
AU - Joshua Troy
AU - Brett Robertson
AU - Riaz Khan
AU - Nathan Pavlos
PY - 2026
DA - 2026/10/24
JO - Lasers in medical science
DO - 10.1007/s10103-026-05075-0
UR - https://europepmc.org/article/MED/42925325
AB - Purpose Lasers are an attractive alternative to mechanical tools for bone preparation, but clinical adoption is limited by low removal rates. This study investigated whether spatiotemporal sequencing of Er:YAG pulses can improve thermomechanical bone ablation, and how pulse separation and delivery order affect ablation rate, efficiency, and heating.Methods A prototype Er:YAG system, with galvanometer scanning, ablated cancellous bone in eight ex vivo lamb femurs. Arm 1 varied the separation between consecutive pulses (0.175 to 0.275 mm). Arm 2 compared four targeting patterns within a fixed pulse grid, maintaining constant fluence and total energy for three of the four patterns. Thermal imaging and pre/post confocal scans quantified heating and volumetric removal.Results Ablation rate was consistent across pulse separations (521 to 552mm³/min), while layer depth scaled linearly with deposited energy (R² = 0.94), decoupling depth control from throughput. Targeting strategy significantly affected ablation efficiency, ranging from 0.19-0.32mm³/J (p < 0.001). Hatching was fastest and most efficient, sustaining consistently high peak surface temperatures (200-250 °C) but lower mean surface temperatures than either scatter strategy.Conclusion Ablation efficiency varied with pulse order under controlled conditions, indicating a dependence beyond single pulse dynamics. We propose inter-pulse thermal coupling, whereby residual heat from a preceding pulse lowers the energy required by the next. Optimising the targeting strategy achieved the fastest reported removal rate for cancellous bone, identifying pulse sequencing as a lever for more efficient ablation.
SN - 0268-8921
SN - 1435-604X
ER -