Photocatalytic Ozonation Using Citric Acid and Cerium Oxide-Modified Graphitic Carbon Nitride: A Novel Approach for Water Decontamination
- 1CERES—Chemical Engineering and Renewable Resources for Sustainability, Department of Chemical Engineering, Faculty of Sciences and Technology, University of Coimbra, Rua Sílvio Lima, Polo II, 3030-790 Coimbra, Portugal
- 2CERES—Chemical Engineering and Renewable Resources for Sustainability, Laboratory of Microbiology, Faculty of Pharmacy, University of Coimbra, Azinhaga de Stª Comba, Polo III, 3000-548 Coimbra, Portugal
- 3Department of Environmental Technology, Faculty of Chemistry, University of Gdansk, Wita Stwosza 63, 80-308 Gdansk, Poland
Abstract
The application of graphitic carbon nitride in photocatalytic ozonation is still a relatively unexplored field. Moreover, modifications to the catalyst may be performed to increase its photoactivity and ozone activation capacity, thereby achieving an efficient and feasible alternative water treatment. In this study, the incorporation of citric acid and cerium nitrate prior to the catalyst thermal polymerization was employed, with different concentrations of each chemical addition analyzed, to obtain oxygen-doped and CeO2-loaded materials. The combined structural, textural, and electronic modifications associated with oxygen incorporation, nitrogen defects, and g-C3N4/CeO2 heterostructure formation contributed to improved treatment performance and reduced ozone requirements. The best catalyst synthesized resulted in a complete elimination of six contaminants of emerging concern in a mixture with a transferred ozone dose 37% and 34% lower than photolytic and bulk g-C3N4 photocatalytic reactions, and more than 50% higher reaction rates. The improved performance of the modified catalyst was also observed in a secondary wastewater effluent, for both chemical contaminants and pathogen removal, achieving a complete disinfection of Escherichia coli (E. coli) and Human polyomavirus 2 (JC virus) with reduced ozone demand. This work provides information regarding carbon nitride enhancement and further indicates its beneficial use in combination with ozone towards water remediation.
Related
- Graphitic Carbon Nitride-Based Heterojunctions for Photocatalytic Water Purification: Mechanisms, Fabrication, and Applications
- Composition-Dependent Structural, Optical, and Photocatalytic Properties of Silver-Decorated Cobalt Ferrite/Graphitic Carbon Nitride Heterostructures for Enhanced Phenol Degradation
- Asymmetric atomic-level engineering of phosphorus-modified Cu single-atom coordination centers on carbon nitride for enhanced photocatalytic hydrogen evolution
- Smartphone-based colorimetric glucose biosensor using peroxidase-like activity of bimetallic catalyst supported onto graphitic carbon nitride nanosheets
- Unveiling Graphitic Carbon Nitride in Hexagonal Boron Nitride Epitaxy on Sapphire
BibTeX
@article{gomes2026photocatalytic,
title = {{Photocatalytic Ozonation Using Citric Acid and Cerium Oxide-Modified Graphitic Carbon Nitride: A Novel Approach for Water Decontamination}},
author = {João Gomes and Joana M. Oliveira and Paweł Mazierski and Adriana Zaleska-Medynska and Ana M. Matos and Rui C. Martins and Eryk Fernandes},
journal = {Catalysts},
year = {2026},
month = nov,
doi = {10.3390/catal16111009},
url = {https://www.mdpi.com/2073-4344/16/11/1009},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Photocatalytic Ozonation Using Citric Acid and Cerium Oxide-Modified Graphitic Carbon Nitride: A Novel Approach for Water Decontamination
AU - João Gomes
AU - Joana M. Oliveira
AU - Paweł Mazierski
AU - Adriana Zaleska-Medynska
AU - Ana M. Matos
AU - Rui C. Martins
AU - Eryk Fernandes
PY - 2026
DA - 2026/11/14
JO - Catalysts
DO - 10.3390/catal16111009
UR - https://www.mdpi.com/2073-4344/16/11/1009
AB - The application of graphitic carbon nitride in photocatalytic ozonation is still a relatively unexplored field. Moreover, modifications to the catalyst may be performed to increase its photoactivity and ozone activation capacity, thereby achieving an efficient and feasible alternative water treatment. In this study, the incorporation of citric acid and cerium nitrate prior to the catalyst thermal polymerization was employed, with different concentrations of each chemical addition analyzed, to obtain oxygen-doped and CeO2-loaded materials. The combined structural, textural, and electronic modifications associated with oxygen incorporation, nitrogen defects, and g-C3N4/CeO2 heterostructure formation contributed to improved treatment performance and reduced ozone requirements. The best catalyst synthesized resulted in a complete elimination of six contaminants of emerging concern in a mixture with a transferred ozone dose 37% and 34% lower than photolytic and bulk g-C3N4 photocatalytic reactions, and more than 50% higher reaction rates. The improved performance of the modified catalyst was also observed in a secondary wastewater effluent, for both chemical contaminants and pathogen removal, achieving a complete disinfection of Escherichia coli (E. coli) and Human polyomavirus 2 (JC virus) with reduced ozone demand. This work provides information regarding carbon nitride enhancement and further indicates its beneficial use in combination with ozone towards water remediation.
SN - 2073-4344
ER -