Chemical and Structural Characterization of Eucalyptus sp. Wood Residue–Poly(vinyl acetate) Composites
- 1Graduate Program in Chemical Engineering, Department of Chemical Engineering, Federal University of Espirito Santo, Rua Alto Universitário, S/N, Alegre 29500-000, ES, Brazil
- 2Department of Forestry and Wood Scinces, Federal University of Espírito Santo, Av. Governador Lindemberg. 316, Jerônimo Monteiro 29500-000, ES, Brazil
- 3Department of Architecture and Design, Federal University of Minas Gerais, Rua Paraíba, 697, Savassi, Belo Horizonte 30130-141, MG, Brazil
Abstract
This study investigates the production of wood–plastic composites (WPCs) using Eucalyptus sp. residues (RE) and poly(vinyl acetate) (PVAc), aiming to evaluate the chemical, structural, thermal, and morphological characteristics of the resulting composites. The research is motivated by the need to add value to residues from the wood industry in Espírito Santo, Brazil, contributing to more sustainable material utilization. The composites were produced with different proportions of RE (70%, 60%, and 40%) and PVAc (30%, 40%, and 60%) and characterized using thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), solid-state nuclear magnetic resonance (NMR), and scanning electron microscopy (SEM). TGA results showed that increasing the PVAc content was associated with a higher initial decomposition temperature and a lower mass loss in the main degradation stage. XRD analysis indicated higher crystallinity in composites with greater RE content, while CP/MAS 13C NMR revealed changes in the organization of the cellulose structure with increasing PVAc content, including a relative increase in signals associated with amorphous regions. FTIR analysis showed changes in the spectral profile and chemical environment of the functional groups as the RE/PVAc ratio varied, although the spectra alone did not conclusively establish the formation of stronger hydrogen bonds. SEM analysis revealed changes in the fracture morphology and matrix distribution with increasing PVAc content. Composites containing 70% RE and 30% PVAc exhibited more pronounced interfacial voids and discontinuities, whereas those containing 40% RE and 60% PVAc showed greater matrix coverage and more continuous polymer-rich regions. However, greater matrix coverage does not, by itself, demonstrate higher interfacial adhesion. Overall, the results demonstrate that variations in RE/PVAc ratio and particle size significantly influence the thermal, chemical, structural, and morphological characteristics of the composites, highlighting the potential of Eucalyptus sp. residues for the production of value-added wood–plastic composites.
Related
- Structural Characterization and Visible-Light Photocatalytic Performance of AgBr-Modified Zr-Containing Titanium Silicalite-1 (TS-1) Composites
- Yarn-Based Aligned Recycled Carbon Fiber/PA11 Composites: Yarn Development, Coupon Characterization, Initial Structural Demonstration, and Screening Life-Cycle Assessment
- Lignin Derivatives in Beech, Eucalyptus and Oak Wood Hydrochar: Mild Solvolysis and Characterization
- Comparative study of chemical treatments on the mechanical and moisture absorption behavior of coccinia indica fiber-reinforced epoxy composites
- A structural census links penultimate-residue class to N-terminal burial in human protein assemblies
BibTeX
@article{junior2026chemical,
title = {{Chemical and Structural Characterization of Eucalyptus sp. Wood Residue–Poly(vinyl acetate) Composites}},
author = {Gilson Mendonça de Miranda Júnior and Nathalia Gabriele Franca Dias Polido and Michel Picanço Oliveira and Josinaldo de Oliveira Dias and Edgar Vladimiro Mantilla Carrasco and Rejane Costa Alves},
journal = {Polymers},
year = {2026},
month = oct,
doi = {10.3390/polym18212652},
url = {https://www.mdpi.com/2073-4360/18/21/2652},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Chemical and Structural Characterization of Eucalyptus sp. Wood Residue–Poly(vinyl acetate) Composites
AU - Gilson Mendonça de Miranda Júnior
AU - Nathalia Gabriele Franca Dias Polido
AU - Michel Picanço Oliveira
AU - Josinaldo de Oliveira Dias
AU - Edgar Vladimiro Mantilla Carrasco
AU - Rejane Costa Alves
PY - 2026
DA - 2026/10/26
JO - Polymers
DO - 10.3390/polym18212652
UR - https://www.mdpi.com/2073-4360/18/21/2652
AB - This study investigates the production of wood–plastic composites (WPCs) using Eucalyptus sp. residues (RE) and poly(vinyl acetate) (PVAc), aiming to evaluate the chemical, structural, thermal, and morphological characteristics of the resulting composites. The research is motivated by the need to add value to residues from the wood industry in Espírito Santo, Brazil, contributing to more sustainable material utilization. The composites were produced with different proportions of RE (70%, 60%, and 40%) and PVAc (30%, 40%, and 60%) and characterized using thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), solid-state nuclear magnetic resonance (NMR), and scanning electron microscopy (SEM). TGA results showed that increasing the PVAc content was associated with a higher initial decomposition temperature and a lower mass loss in the main degradation stage. XRD analysis indicated higher crystallinity in composites with greater RE content, while CP/MAS 13C NMR revealed changes in the organization of the cellulose structure with increasing PVAc content, including a relative increase in signals associated with amorphous regions. FTIR analysis showed changes in the spectral profile and chemical environment of the functional groups as the RE/PVAc ratio varied, although the spectra alone did not conclusively establish the formation of stronger hydrogen bonds. SEM analysis revealed changes in the fracture morphology and matrix distribution with increasing PVAc content. Composites containing 70% RE and 30% PVAc exhibited more pronounced interfacial voids and discontinuities, whereas those containing 40% RE and 60% PVAc showed greater matrix coverage and more continuous polymer-rich regions. However, greater matrix coverage does not, by itself, demonstrate higher interfacial adhesion. Overall, the results demonstrate that variations in RE/PVAc ratio and particle size significantly influence the thermal, chemical, structural, and morphological characteristics of the composites, highlighting the potential of Eucalyptus sp. residues for the production of value-added wood–plastic composites.
SN - 2073-4360
ER -