Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response
Abstract
Polyetheretherketone (PEEK) has emerged as a promising biomaterial for orthopedic and craniofacial implants due to its favorable mechanical properties and fatigue resistance; however, its inherent chemical inertness limits effective osseointegration. In this study, femtosecond laser surface modification is explored as a strategy to enhance the bioactivity of PEEK. Based on a previously performed parametric study, controlled micro- and nanoscale surface textures were fabricated using femtosecond laser processing, enabling precise tuning of surface roughness and wettability without the need for additional chemical treatment. The modified surfaces were systematically characterized in terms of morphology, composition, and topography using scanning electron microscopy (SEM), 3D profilometry, and water contact angle measurements. Four optimized femtosecond laser-generated surface architectures were selected for the present investigation and comprehensively characterized, followed by in vitro evaluation of dental pulp stem cell adhesion, morphology, and proliferation. The results indicate that laser-induced micro/nanostructuring enhances the surface properties of PEEK, while supporting cellular attachment and favorable cell–surface interaction. Differences in the biological response were observed among the optimized laser-textured surfaces. These findings highlight the feasibility of femtosecond laser texturing as a clean, reproducible, and scalable approach for the development of next-generation, personalized orthopedic implants.
Related
- Engineering Outstanding Water Retention and Toughness through Gradient Cellular Architecture and Delignification: A Case Study of Palm Fronds
- Bottom-up engineering of EV-mimetic vesicles reveals selective protein loading and modulates cellular uptake and biodistribution
- Structure-Based Discovery of GTP-Enhanced Rab10 Modulators and Their Effects on Alzheimer Disease-Relevant Cellular Phenotypes
- Engineering Mosaic T7 Bacteriophages for Dual Peptide Display to Enable Cellular Targeting and Ligand-Directed Protein Capture.
- Mesenchymal Stem Cell-Derived Extracellular Vesicles for Functional Intracellular Delivery: Engineering, Targeting, Cellular Uptake, Biological Barriers, and Therapeutic Translation
BibTeX
@article{angelova2026surface,
title = {{Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response}},
author = {Liliya Angelova and Flora Lemaire and Halima Kerdjoudj and Aleksandra Zhelyazkova and Albena Daskalova},
journal = {Surfaces},
year = {2026},
month = jul,
doi = {10.3390/surfaces9030067},
url = {https://univ-reims.hal.science/hal-05765787v1},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Surface Engineering of PEEK Using Ultrashort Laser Pulses: A Pathway to Enhanced Cellular Response
AU - Liliya Angelova
AU - Flora Lemaire
AU - Halima Kerdjoudj
AU - Aleksandra Zhelyazkova
AU - Albena Daskalova
PY - 2026
DA - 2026/07/22
JO - Surfaces
DO - 10.3390/surfaces9030067
UR - https://univ-reims.hal.science/hal-05765787v1
AB - Polyetheretherketone (PEEK) has emerged as a promising biomaterial for orthopedic and craniofacial implants due to its favorable mechanical properties and fatigue resistance; however, its inherent chemical inertness limits effective osseointegration. In this study, femtosecond laser surface modification is explored as a strategy to enhance the bioactivity of PEEK. Based on a previously performed parametric study, controlled micro- and nanoscale surface textures were fabricated using femtosecond laser processing, enabling precise tuning of surface roughness and wettability without the need for additional chemical treatment. The modified surfaces were systematically characterized in terms of morphology, composition, and topography using scanning electron microscopy (SEM), 3D profilometry, and water contact angle measurements. Four optimized femtosecond laser-generated surface architectures were selected for the present investigation and comprehensively characterized, followed by in vitro evaluation of dental pulp stem cell adhesion, morphology, and proliferation. The results indicate that laser-induced micro/nanostructuring enhances the surface properties of PEEK, while supporting cellular attachment and favorable cell–surface interaction. Differences in the biological response were observed among the optimized laser-textured surfaces. These findings highlight the feasibility of femtosecond laser texturing as a clean, reproducible, and scalable approach for the development of next-generation, personalized orthopedic implants.
SN - 2571-9637
ER -