Hierarchical 0D/3D BaTiO
4 affiliations
- 1University of Johannesburg, Department of Chemical Science, Doornfontein Campus, Johannesburg, 2028, South Africa
- 2Department of Chemistry, Faculty of Natural and Agricultural Sciences, University of Pretoria, Private Bag X20, Hatfield 0028, Pretoria, South Africa; Corresponding authors.
- 3Council for Scientific and Industrial Research (CSIR), Pretoria Campus, Pretoria, 0001, South Africa
- 4University of Johannesburg, Department of Chemical Science, Doornfontein Campus, Johannesburg, 2028, South Africa; Centre for Nanomaterial Science Research, Department of Chemical Sciences, Doornfontein Campus, Johannesburg, 2028, South Africa; Corresponding authors.
Abstract
A hierarchical BaTiO 3 /MgIn 2 S 4 (BTO/MIS) heterostructure was synthesized via a one‑step solvothermal route to couple the strong piezoelectric potential of BaTiO 3 with the visible‑light activity of MgIn 2 S 4 . X-ray diffraction, electron microscopy, and XPS confirm the intimate interfacial contact between BTO and MIS nanosheets, establishing an n–n S-scheme junction that promotes internal band bending and an intrinsic electric field for vectorial charge migration. Under simultaneous 70 W simulated solar irradiation and low‑power (20 kHz, 20 W) ultrasonication, the optimized 2.0‑BTO/MIS composite decomposed 95 % of the fluoroquinolone antibiotic norfloxacin (10 mg L -1 ) within 90 min, nearly an order of magnitude faster than either photocatalysis or piezocatalysis alone and corresponding to a synergy factor of 6.9 and 89.6 %. Electrochemical impedance and photoluminescence analyses revealed markedly lower charge-transfer resistance and suppressed electron–hole recombination compared to the parent phases, while transient piezocurrent measurements demonstrated an efficient conversion of mechanical energy into reactive charge carriers. Degradation proceeded most effectively in acidic solution (optimum pH ≈ 3), where the positively charged antibiotic was strongly adsorbed onto the negatively polarised surface. Radical‑quenching experiments identified valence‑band holes and •OH as the dominant oxidants, consistent with the S‑scheme mechanism. Collectively, these results demonstrate that integrating piezoelectric BaTiO 3 with visible‑light‑responsive MgIn 2 S 4 in an S‑scheme configuration affords a robust piezo‑photocatalyst capable of harvesting both solar and low‑frequency mechanical energies to drive rapid, mineralization-level removal of persistent pharmaceutical pollutants from water
Related
- Lightweight hierarchical composite aerogel for ultrawideband microwave absorption
- Electronic modulation of confined NiFe nanoalloys in hierarchical C3N4/CNT frameworks for bifunctional oxygen electrocatalysis
- Empirical-Bayes and Bayesian Hierarchical Modelling for Missingness and Differential Expression in Proteomics
- Hierarchical Copper-Based Metal-Organic Frameworks for Improved Catalytic Performance
- Bio-inspired decoration of Ag nanoparticles on eggshell-derived hierarchical CaO-based flower-like architectures for enhanced antibacterial, photocatalytic, and hemocompatible applications
BibTeX
@article{mohlala2026hierarchical,
title = {{Hierarchical 0D/3D BaTiO}},
author = {Tshepo T. Mohlala and Tunde L. Yusuf and Mike Masukume and Vincent Ojijo and Nonhlangabezo Mabuba},
journal = {Applied Surface Science Advances},
year = {2026},
month = oct,
doi = {10.1016/j.apsadv.2026.101054},
url = {https://doi.org/10.1016/j.apsadv.2026.101054},
note = {CC BY},
}
RIS
TY - JOUR
TI - Hierarchical 0D/3D BaTiO
AU - Tshepo T. Mohlala
AU - Tunde L. Yusuf
AU - Mike Masukume
AU - Vincent Ojijo
AU - Nonhlangabezo Mabuba
PY - 2026
DA - 2026/10/24
JO - Applied Surface Science Advances
DO - 10.1016/j.apsadv.2026.101054
UR - https://doi.org/10.1016/j.apsadv.2026.101054
AB - A hierarchical BaTiO 3 /MgIn 2 S 4 (BTO/MIS) heterostructure was synthesized via a one‑step solvothermal route to couple the strong piezoelectric potential of BaTiO 3 with the visible‑light activity of MgIn 2 S 4 . X-ray diffraction, electron microscopy, and XPS confirm the intimate interfacial contact between BTO and MIS nanosheets, establishing an n–n S-scheme junction that promotes internal band bending and an intrinsic electric field for vectorial charge migration. Under simultaneous 70 W simulated solar irradiation and low‑power (20 kHz, 20 W) ultrasonication, the optimized 2.0‑BTO/MIS composite decomposed 95 % of the fluoroquinolone antibiotic norfloxacin (10 mg L -1 ) within 90 min, nearly an order of magnitude faster than either photocatalysis or piezocatalysis alone and corresponding to a synergy factor of 6.9 and 89.6 %. Electrochemical impedance and photoluminescence analyses revealed markedly lower charge-transfer resistance and suppressed electron–hole recombination compared to the parent phases, while transient piezocurrent measurements demonstrated an efficient conversion of mechanical energy into reactive charge carriers. Degradation proceeded most effectively in acidic solution (optimum pH ≈ 3), where the positively charged antibiotic was strongly adsorbed onto the negatively polarised surface. Radical‑quenching experiments identified valence‑band holes and •OH as the dominant oxidants, consistent with the S‑scheme mechanism. Collectively, these results demonstrate that integrating piezoelectric BaTiO 3 with visible‑light‑responsive MgIn 2 S 4 in an S‑scheme configuration affords a robust piezo‑photocatalyst capable of harvesting both solar and low‑frequency mechanical energies to drive rapid, mineralization-level removal of persistent pharmaceutical pollutants from water
SN - 2666-5239
ER -