Disentangling Measurement Protocol from Material Physics in Isotypic and Anisotypic SiC/Si Heterojunctions: A Metrology-Driven Study for Betavoltaic Energy Conversion
Abstract
We compare isotypic (n-SiC/n-Si) and anisotypic (n-SiC/p-Si) heterojunctions using Kelvin probe force microscopy, scanning tunnelling spectroscopy, precision electrical measurements with a Keithley 2450 SourceMeter, and a 0.1 farad supercapacitor charge-storage test. Two-wire probing shows an enhanced low-bias current in the isotypic structures; four-wire Kelvin sensing removes the voltage-drop contribution of external leads and contacts and collapses this current to a much lower bulk and interface limited level. The high density of interface states detected by KPFM and STS, up to five times ten to the twelfth per square centimetre per electronvolt in dislocation-rich regions, provides a plausible origin for the enhanced local response. Anisotypic junctions exhibit a genuine diode-like current-voltage characteristic and an open-circuit voltage of about 1.2 volts under beta irradiation. In the capacitor test with the patented charge-pump converter, the anisotypic structure reaches 0.25 volts versus 0.05 volts for the isotypic one after 30 minutes, giving an energy ratio of about 25. We formulate a measurement-interpretation framework based on four-wire Kelvin sensing, generator polarity with cathode to LO, and high-impedance output-off state. Our results show that anisotypic SiC/Si heterojunctions are the preferred platform for betavoltaic conversion when measured correctly.
Versions
Related
- Disentangling environmental influence on wing size and shape in Partamona helleri across the Atlantic forest
- Disentangling the Toric Code
- Disentangling Continuous-Time Latent Dynamics: Identifiability of Latent SDEs via Diffusion Shifts
- Graph Additive Models disentangling feature, topology, and interactions
- Null importance: Disentangling relevance for interpretable machine learning
BibTeX
@misc{dolgopolov2026disentangling,
title = {{Disentangling Measurement Protocol from Material Physics in Isotypic and Anisotypic SiC/Si Heterojunctions: A Metrology-Driven Study for Betavoltaic Energy Conversion}},
author = {Mikhail V. Dolgopolov},
howpublished = {arXiv},
year = {2026},
month = sep,
doi = {10.48550/arxiv.2609.26277},
eprint = {2609.26277},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2609.26277},
}
RIS
TY - UNPB
TI - Disentangling Measurement Protocol from Material Physics in Isotypic and Anisotypic SiC/Si Heterojunctions: A Metrology-Driven Study for Betavoltaic Energy Conversion
AU - Mikhail V. Dolgopolov
PY - 2026
DA - 2026/09/01
PB - arXiv
DO - 10.48550/arxiv.2609.26277
UR - https://arxiv.org/abs/2609.26277
AB - We compare isotypic (n-SiC/n-Si) and anisotypic (n-SiC/p-Si) heterojunctions using Kelvin probe force microscopy, scanning tunnelling spectroscopy, precision electrical measurements with a Keithley 2450 SourceMeter, and a 0.1 farad supercapacitor charge-storage test. Two-wire probing shows an enhanced low-bias current in the isotypic structures; four-wire Kelvin sensing removes the voltage-drop contribution of external leads and contacts and collapses this current to a much lower bulk and interface limited level. The high density of interface states detected by KPFM and STS, up to five times ten to the twelfth per square centimetre per electronvolt in dislocation-rich regions, provides a plausible origin for the enhanced local response. Anisotypic junctions exhibit a genuine diode-like current-voltage characteristic and an open-circuit voltage of about 1.2 volts under beta irradiation. In the capacitor test with the patented charge-pump converter, the anisotypic structure reaches 0.25 volts versus 0.05 volts for the isotypic one after 30 minutes, giving an energy ratio of about 25. We formulate a measurement-interpretation framework based on four-wire Kelvin sensing, generator polarity with cathode to LO, and high-impedance output-off state. Our results show that anisotypic SiC/Si heterojunctions are the preferred platform for betavoltaic conversion when measured correctly.
ER -