Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 44 min ago
Peer-reviewedCC BY 4.0Science and Technology of Advanced Materials

Counting hydrogen in porous adsorbents

4 affiliations
  1. 1Department of Materials Science, Institute of Pure and Applied Sciences, University of Tsukuba, Tsukuba, Ibaraki, Japan
  2. 2Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, Sendai, Miyagi, Japan
  3. 3Hydrogen Boride Research Center, Tsukuba Institute of Advanced Research, University of Tsukuba, Tsukuba, Ibaraki, Japan
  4. 4Research Center for Energy and Environmental Materials, National Institute for Materials Science, Tsukuba, Ibaraki, Japan

Abstract

The ultimate goal of the hydrogen economy is to develop a hydrogen storage system that efficiently meets or exceeds the targeted goal set by the US Department of Energy (DOE) for onboard light-duty vehicles. These targets are defined in terms of usable quantity of hydrogen deliverable to the fuel cell system, including all stored hydrogen, media, reactants, and system components. To achieve reliable system performance, it is essential to precisely and uniformly measure the material properties. However, there have been several discrepancies and methodological inconsistencies, particularly in the reporting of volumetric storage capacity of porous frameworks. In the case of porous systems, where hydrogen is stored through the physisorption process on the pore surface, the concepts of ‘excess’, ‘absolute’, and ‘total’ hydrogen storage appear. Therefore, estimation of storage performance in such systems is complex. Many porous materials have been investigated over the years; however, without the assurance of uniform and proper methodological considerations, the reported performance of these materials remains difficult to assess reliably and does not provide the benefit toward the work in hand. In this perspective, we address these issues and propose certain reporting protocols to ensure valid identification of suitable materials for further development.

Related

  1. Comparative One-Step Activation of Zhundong Coal Using KOH and ZnCl2: Hierarchically Porous Adsorbents for Malachite Green Adsorption
    Jing Zhang, Lin Zhang, Peitao Zhao +2
    ACS OmegaPeer-reviewedCC BY-NC-ND 4.0Full textGeneral chemistryCrossref
  2. Hierarchically Porous Nickel Stainless Steel Electrodes for Simultaneous Hydrogen and Formate Production via Membrane-Less Glucose Electrolysis
    Kilaparthi Sravan Kumar, Jesús González-Cobos, Philippe Vernoux +1
    ACS CatalysisPeer-reviewedCC BY 4.0Full text2 citedCatalysisEnvironmental science & pollutionHAL
  3. Simultaneous determination of binary diffusion coefficients of hydrogen and methane in water and water-saturated porous media using a pressure decay method: experiments and modeling
    Ammar Aldalawy, Mahmood Abdi, Hassan Hassanzadeh
    RSC advancesPeer-reviewedCC BY-NCFull textPhysical chemistryEurope PMCEurope PMCPMC
  4. Adsorptive Removal of 1,2-Dichloroethane Using Novel Oleogel Adsorbents: Synthesis Strategy and Adsorption Mechanism Insight
    Yunsheng Liao, Jialong Mei, Youxian Zhang
    ACS omegaPeer-reviewedCC BY-NC-NDFull textGeneral chemistryEurope PMC
  5. Molecular recognition of Atrazine, 2,4-Dichlorophenoxyacetic acid, and Chlorpyrifos by cyclodextrin-based adsorbents: insights into selective pesticide removal
    Melika Asadian, Roya Kiani-anbouhi
    Scientific ReportsPeer-reviewedCC BY-NC-ND 4.0Full textOrganic chemistryCrossref
BibTeX
@article{roy2026counting,
  title = {{Counting hydrogen in porous adsorbents}},
  author = {Susmita Roy and Takahiro Kondo},
  journal = {Science and Technology of Advanced Materials},
  year = {2026},
  month = aug,
  doi = {10.1080/14686996.2026.2722037},
  url = {https://doi.org/10.1080/14686996.2026.2722037},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Counting hydrogen in porous adsorbents
AU  - Susmita Roy
AU  - Takahiro Kondo
PY  - 2026
DA  - 2026/08/25
JO  - Science and Technology of Advanced Materials
DO  - 10.1080/14686996.2026.2722037
UR  - https://doi.org/10.1080/14686996.2026.2722037
AB  - The ultimate goal of the hydrogen economy is to develop a hydrogen storage system that efficiently meets or exceeds the targeted goal set by the US Department of Energy (DOE) for onboard light-duty vehicles. These targets are defined in terms of usable quantity of hydrogen deliverable to the fuel cell system, including all stored hydrogen, media, reactants, and system components. To achieve reliable system performance, it is essential to precisely and uniformly measure the material properties. However, there have been several discrepancies and methodological inconsistencies, particularly in the reporting of volumetric storage capacity of porous frameworks. In the case of porous systems, where hydrogen is stored through the physisorption process on the pore surface, the concepts of ‘excess’, ‘absolute’, and ‘total’ hydrogen storage appear. Therefore, estimation of storage performance in such systems is complex. Many porous materials have been investigated over the years; however, without the assurance of uniform and proper methodological considerations, the reported performance of these materials remains difficult to assess reliably and does not provide the benefit toward the work in hand. In this perspective, we address these issues and propose certain reporting protocols to ensure valid identification of suitable materials for further development.
SN  - 1468-6996
SN  - 1878-5514
ER  -