Optimization of electrochemical reduction of high-pressure CO₂ to hydrocarbon (methane) at nickel electrode in cold methanol.
4 affiliations
- 1Department of Applied Chemistry, Graduate School of Engineering, Mie University Tsu Mie 514-8507 Japan [email protected] [email protected].
- 2Department of Chemistry, Faculty of Science, University of Chittagong 4331 Bangladesh.
- 3Mie Global Environment Center for Education & Research, Mie University Tsu Mie 514-8507 Japan.
- 4Department of Mechanical Engineering, Faculty of Engineering, Chiang Mai University Chiang Mai 50200 Thailand.
Abstract
Electrochemical reduction of CO2 in conventional aqueous electrolytes is often limited by low CO2 solubility and the competing hydrogen evolution reaction (HER). To address these challenges, we investigated CO2 electroreduction on a Ni electrode in a nonaqueous methanol/LiCl electrolyte under high CO2 pressure (1.0 MPa) and low-temperature conditions (258-288 K). The combined effects of temperature and applied potential on electrochemical behavior, product distribution, and reaction selectivity were systematically evaluated. Cyclic voltammetry (CV) revealed pronounced temperature-dependent changes in reduction characteristics, indicating significant modifications in interfacial charge-transfer processes and CO2 activation kinetics. Product analysis confirmed HCOOCH3, CH4, and CO as the primary carbon-containing products, with their formation strongly influenced by both temperature and cathodic potential. Lower temperatures substantially enhanced carbon-product generation while suppressing the competing hydrogen evolution reaction, leading to maximum faradaic efficiencies of approximately 15% for HCOOCH3 at 258 K and -1.8 V and 13% for CH4 at 258 K and -2.0 V. The improved performance is attributed to enhanced CO2 solubility and availability in the methanol-based electrolyte under high-pressure, low-temperature conditions, together with favorable modulation of interfacial reaction pathways. These findings demonstrate that simultaneous control of pressure, temperature, and electrolyte environment provides an effective strategy for tuning CO2 reduction selectivity in nonaqueous systems. This work offers valuable insights into the mechanistic aspects of pressure- and temperature-assisted CO2 electroreduction and highlights methanol/LiCl electrolytes as promising media for selective CO2-to-fuel conversion.
Related
- Understanding oxygen reduction/evolution reaction and degradation mechanisms on BaCo0.4Fe0.4Zr0.1Y0.1O3-δ electrode in protonic ceramic electrochemical cells via the distribution of relaxation times analysis
- MnO2–Co3O4@RGO hybrid nanocomposite-modified carbon paste electrode for sensitive electrochemical detection of hydrogen peroxide in food and edible-oil matrices
- A kinetic model of electron transfer at the electrode-electrolyte interface: Statistical mechanics and electrochemical aspects
- Immersion-Controlled Nanoparticle Electrodeposition on a Patterned Pyrolyzed Photoresist Film Electrode for Single-Entity Electrochemistry Studies Using Scanning Electrochemical Cell Microscopy.
- High Fidelity Stochastic Electrode Microstructure Generation for Low Temperature Electrochemical Systems
BibTeX
@article{uzzaman2026optimization,
title = {{Optimization of electrochemical reduction of high-pressure CO₂ to hydrocarbon (methane) at nickel electrode in cold methanol.}},
author = {Monir Uzzaman and Mai Furukawa and Ikki Tateishi and Hideyuki Katsumata and Konlayutt Punyawudho and Mst Farhana Afrin and Satoshi Kaneco},
journal = {RSC advances},
year = {2026},
month = oct,
doi = {10.1039/d6ra06688g},
url = {https://europepmc.org/article/MED/42953534},
note = {CC BY-NC},
}
RIS
TY - JOUR
TI - Optimization of electrochemical reduction of high-pressure CO₂ to hydrocarbon (methane) at nickel electrode in cold methanol.
AU - Monir Uzzaman
AU - Mai Furukawa
AU - Ikki Tateishi
AU - Hideyuki Katsumata
AU - Konlayutt Punyawudho
AU - Mst Farhana Afrin
AU - Satoshi Kaneco
PY - 2026
DA - 2026/10/28
JO - RSC advances
DO - 10.1039/d6ra06688g
UR - https://europepmc.org/article/MED/42953534
AB - Electrochemical reduction of CO2 in conventional aqueous electrolytes is often limited by low CO2 solubility and the competing hydrogen evolution reaction (HER). To address these challenges, we investigated CO2 electroreduction on a Ni electrode in a nonaqueous methanol/LiCl electrolyte under high CO2 pressure (1.0 MPa) and low-temperature conditions (258-288 K). The combined effects of temperature and applied potential on electrochemical behavior, product distribution, and reaction selectivity were systematically evaluated. Cyclic voltammetry (CV) revealed pronounced temperature-dependent changes in reduction characteristics, indicating significant modifications in interfacial charge-transfer processes and CO2 activation kinetics. Product analysis confirmed HCOOCH3, CH4, and CO as the primary carbon-containing products, with their formation strongly influenced by both temperature and cathodic potential. Lower temperatures substantially enhanced carbon-product generation while suppressing the competing hydrogen evolution reaction, leading to maximum faradaic efficiencies of approximately 15% for HCOOCH3 at 258 K and -1.8 V and 13% for CH4 at 258 K and -2.0 V. The improved performance is attributed to enhanced CO2 solubility and availability in the methanol-based electrolyte under high-pressure, low-temperature conditions, together with favorable modulation of interfacial reaction pathways. These findings demonstrate that simultaneous control of pressure, temperature, and electrolyte environment provides an effective strategy for tuning CO2 reduction selectivity in nonaqueous systems. This work offers valuable insights into the mechanistic aspects of pressure- and temperature-assisted CO2 electroreduction and highlights methanol/LiCl electrolytes as promising media for selective CO2-to-fuel conversion.
SN - 2046-2069
ER -