Skip to content
DraconiticResearch
Search Sources API
189,273 studies31 sourcesUpdated 48 min ago
Peer-reviewedCC BY 4.0ACS Omega

Activated Carbon from Tropical Almond Shell ( Terminalia catappa L. ): Synthesis, Characterization, Application, and Regeneration for Chromium (VI) Adsorption

  1. 1Federal University of Sergipe , , Avenida Marechal Rondon, s/n, Rosa Elze , , ,
  2. 2University of Campinas , , , ,

Abstract

This study reports the synthesis of activated carbon (AC–H3PO4) from tropical almond shell (Terminalia catappa L.), an agro-waste material, using phosphoric acid and evaluates its effectiveness in removing hexavalent chromium (Cr(VI)) from aqueous media, emphasizing regeneration and reuse as strategies aligned with circular economy principles. The adsorbent was characterized in terms of its textural properties and chemical composition using Brunauer–Emmett–Teller (BET) surface area analysis and scanning electron microscopy, zero charge point (PCZ), EDX, and elemental analysis (CHN). Batch adsorption studies were performed to evaluate the removal of Cr(VI) from aqueous solutions. Textural analysis showed that the material CA-H3PO4 has a high mesoporous area (54%), with surface area BET of 1489.72 m2 g–1. The pH at which charges were neutralized between the adsorbent surface and the solution was equivalent to 2. At this pH, Cr(VI) removal exceeded 80.0% under the experimental conditions of 100 mL of solution containing 50.0 mg L–1 Cr(VI) and 0.05 g of the adsorbent. The adsorption kinetics were evaluated using the pseudo-first-order, pseudo-second-order, and Weber–Morris intraparticle diffusion models, with the pseudo-second-order model providing the best fit. Likewise, the equilibrium data were analyzed using the Langmuir, Freundlich, and Temkin isotherm models, with the Freundlich model showing the best agreement with the experimental data. The adsorption process was rapid, exhibiting a rate constant of 0.002 g mg–1 min–1, and was found to be spontaneous and endothermic, as indicated by the values of ΔG (−0.2 to −0.5 kJ mol–1) and ΔH (13.3 kJ mol–1). Desorption experiments demonstrated that the adsorbent could be regenerated using 0.5 mol L–1 NaOH, retaining a Cr(VI) adsorption capacity of 83.6 mg g–1 after the fourth regeneration cycle, corresponding to 55.0% of its original adsorption capacity. These findings suggest that CA-H3PO4 has considerable potential as an adsorbent for the remediation of waters contaminated with hexavalent chromium.

Related

  1. Gum acacia-grafted-poly(N,N-dimethylacrylamide)/oxidised-MWCNTs nanocomposite hydrogel: synthesis, characterization, and application in propranolol HCl adsorption from aqueous media
    Sanjay M. Bamaniya, Pragnesh N. Dave
    RSC advancesPeer-reviewedCC BY-NCFull textHydrology & soilsEurope PMCPMC
  2. Efficient removal of regorafenib from aqueous solutions using KOH-activated hazelnut husk-derived activated carbon: adsorption mechanism, kinetics, isotherms and thermodynamics
    Yunus Emre Üçtaş, İbrahim Bulduk, Cemal Çifci +1
    Scientific ReportsPeer-reviewedCC BYFull textHydrology & soilsDOAJ
  3. Humidity-dependent formaldehyde adsorption on porous frameworks: A comparative study of MOFs, zeolites, and activated carbon
    Marie Froehly, Anaïs Becker, Gérald Chaplais +3
    Next MaterialsPeer-reviewedCC BY 4.0Full textMaterials & polymersEnvironmental science & pollutionHAL
  4. Extended evaluation of activated carbon-embedded glucomannan membranes for the adsorption of structurally and charge-distinct dyes.
    Masahide Hagiri, Taisei Igari, Keita Kashima
    BMC research notesPeer-reviewedCC BY-NC-NDFull textHydrology & soilsEurope PMCDOAJ
  5. Regeneration and Recyclability of Magnetic Nanomaterials for Multi-Cycle Water Treatment: Toward Circular Adsorption–Desorption Systems
    Mai M. A. H. Shanab, Arfa Iqbal, Emre Çevik +4
    NanomaterialsPeer-reviewedCC BY7 citedHydrology & soilsOpenAlex
BibTeX
@article{magnago2026activated,
  title = {{Activated Carbon from Tropical Almond Shell ( Terminalia catappa L. ): Synthesis, Characterization, Application, and Regeneration for Chromium (VI) Adsorption}},
  author = {Tiago Magnago and José Jailton Marques and Victor Hugo dos SantosRamos and Danilo Conceição Silva and Licianne Pimentel Santa Rosa and Edilson de Jesus Santos},
  journal = {ACS Omega},
  year = {2026},
  month = oct,
  doi = {10.1021/acsomega.6c06329},
  url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c06329/5456216/Activated-Carbon-from-Tropical-Almond-Shell},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Activated Carbon from Tropical Almond Shell ( Terminalia catappa L. ): Synthesis, Characterization, Application, and Regeneration for Chromium (VI) Adsorption
AU  - Tiago Magnago
AU  - José Jailton Marques
AU  - Victor Hugo dos SantosRamos
AU  - Danilo Conceição Silva
AU  - Licianne Pimentel Santa Rosa
AU  - Edilson de Jesus Santos
PY  - 2026
DA  - 2026/10/22
JO  - ACS Omega
DO  - 10.1021/acsomega.6c06329
UR  - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c06329/5456216/Activated-Carbon-from-Tropical-Almond-Shell
AB  - This study reports the synthesis of activated carbon (AC–H3PO4) from tropical almond shell (Terminalia catappa L.), an agro-waste material, using phosphoric acid and evaluates its effectiveness in removing hexavalent chromium (Cr(VI)) from aqueous media, emphasizing regeneration and reuse as strategies aligned with circular economy principles. The adsorbent was characterized in terms of its textural properties and chemical composition using Brunauer–Emmett–Teller (BET) surface area analysis and scanning electron microscopy, zero charge point (PCZ), EDX, and elemental analysis (CHN). Batch adsorption studies were performed to evaluate the removal of Cr(VI) from aqueous solutions. Textural analysis showed that the material CA-H3PO4 has a high mesoporous area (54%), with surface area BET of 1489.72 m2 g–1. The pH at which charges were neutralized between the adsorbent surface and the solution was equivalent to 2. At this pH, Cr(VI) removal exceeded 80.0% under the experimental conditions of 100 mL of solution containing 50.0 mg L–1 Cr(VI) and 0.05 g of the adsorbent. The adsorption kinetics were evaluated using the pseudo-first-order, pseudo-second-order, and Weber–Morris intraparticle diffusion models, with the pseudo-second-order model providing the best fit. Likewise, the equilibrium data were analyzed using the Langmuir, Freundlich, and Temkin isotherm models, with the Freundlich model showing the best agreement with the experimental data. The adsorption process was rapid, exhibiting a rate constant of 0.002 g mg–1 min–1, and was found to be spontaneous and endothermic, as indicated by the values of ΔG (−0.2 to −0.5 kJ mol–1) and ΔH (13.3 kJ mol–1). Desorption experiments demonstrated that the adsorbent could be regenerated using 0.5 mol L–1 NaOH, retaining a Cr(VI) adsorption capacity of 83.6 mg g–1 after the fourth regeneration cycle, corresponding to 55.0% of its original adsorption capacity. These findings suggest that CA-H3PO4 has considerable potential as an adsorbent for the remediation of waters contaminated with hexavalent chromium.
SN  - 2470-1343
ER  -