Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste
- 1Universiti Sains Malaysia , , , ,
- 2University of Hail , , ,
- 3Hadhramout University , , , ,
Abstract
Utilization of organic waste offers a promising pathway to advance the circular bioeconomy and address global energy challenges through sustainable biodiesel production. Camelus dromedarius fat waste, abundant in arid and semiarid regions, remains an underexploited byproduct with considerable potential as a renewable biodiesel feedstock, reducing dependence on conventional resources. Despite significant progress in biodiesel research, studies on the transesterification of Camelus dromedarius fat waste are limited, and comprehensive optimization of its reaction parameters is lacking. This study evaluated biodiesel production from camel fat waste oil through alkali-catalyzed transesterification and optimized the process using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). For the optimization stage, catalyst concentration (0.25–1.25 wt %), reaction temperature (45–85 °C), reaction time (15–55 min), and oil-to-methanol molar ratio (1:3–1:15) were selected as independent variables to investigate their individual and interactive effects on biodiesel yield. The RSM model predicted a maximum biodiesel yield of 95% under optimal conditions of 68 °C reaction temperature, 0.8 wt % catalyst concentration, 36 min reaction time, and an oil-to-methanol molar ratio of 1:9.6. Validation experiments confirmed the model prediction with an average yield of 94.82% and a relative error of only 0.19%. The produced biodiesel was characterized by FTIR, GC-FID, and physicochemical properties. The fuel properties were largely consistent with ASTM D6751 specifications, while viscosity slightly exceeded the EN 14214 limit and cold-flow properties indicated limited suitability for low-temperature applications. This underscores the potential of discarded camel fat as a sustainable feedstock and demonstrating that optimized transesterification enhances resource efficiency and advances biodiesel technologies within a circular bioeconomy framework.
Related
- Enhancing Alkaline Biodiesel Transesterification Using Protic Ionic Liquid [DETA][Hx] as a Low-Concentration Additive
- Two-Stage Optimization of Oleic Acid Esterification via Response Surface Methodology and Green Chemistry Metrics Selection for Biodiesel from WCO
- Predictive Optimization of Vibrations in a Biodiesel-Fueled Variable Compression Ratio Engine Using BO-CNN-LSTM
- RxnScout: Deploying a Vision-Language Agent for Nickel-Catalyzed C-Glycosylation Condition Optimization
- Optimization of Sodium-Catalyzed Si–N Bond Formation Through a Comparative Study of Group 1 Alkoxides
BibTeX
@article{alsaadi2026optimization,
title = {{Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste}},
author = {Sami Alsaadi and Mardiana Idayu Ahmad and Fozy Binhweel and Wardah Senusi and Ehsan Shalfoh and Mohammad Aliff Shakir},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c03814},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c03814/5461054/Optimization-of-Base-Catalyzed-Transesterification},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste
AU - Sami Alsaadi
AU - Mardiana Idayu Ahmad
AU - Fozy Binhweel
AU - Wardah Senusi
AU - Ehsan Shalfoh
AU - Mohammad Aliff Shakir
PY - 2026
DA - 2026/10/29
JO - ACS Omega
DO - 10.1021/acsomega.6c03814
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c03814/5461054/Optimization-of-Base-Catalyzed-Transesterification
AB - Utilization of organic waste offers a promising pathway to advance the circular bioeconomy and address global energy challenges through sustainable biodiesel production. Camelus dromedarius fat waste, abundant in arid and semiarid regions, remains an underexploited byproduct with considerable potential as a renewable biodiesel feedstock, reducing dependence on conventional resources. Despite significant progress in biodiesel research, studies on the transesterification of Camelus dromedarius fat waste are limited, and comprehensive optimization of its reaction parameters is lacking. This study evaluated biodiesel production from camel fat waste oil through alkali-catalyzed transesterification and optimized the process using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). For the optimization stage, catalyst concentration (0.25–1.25 wt %), reaction temperature (45–85 °C), reaction time (15–55 min), and oil-to-methanol molar ratio (1:3–1:15) were selected as independent variables to investigate their individual and interactive effects on biodiesel yield. The RSM model predicted a maximum biodiesel yield of 95% under optimal conditions of 68 °C reaction temperature, 0.8 wt % catalyst concentration, 36 min reaction time, and an oil-to-methanol molar ratio of 1:9.6. Validation experiments confirmed the model prediction with an average yield of 94.82% and a relative error of only 0.19%. The produced biodiesel was characterized by FTIR, GC-FID, and physicochemical properties. The fuel properties were largely consistent with ASTM D6751 specifications, while viscosity slightly exceeded the EN 14214 limit and cold-flow properties indicated limited suitability for low-temperature applications. This underscores the potential of discarded camel fat as a sustainable feedstock and demonstrating that optimized transesterification enhances resource efficiency and advances biodiesel technologies within a circular bioeconomy framework.
SN - 2470-1343
ER -