Improvement of the Efficiency of Organic Solar Cells Using the Terthiophene-Pyran-Malononitrile (T3PM) as Electron Donor, through the use of a MoO3/CuI Anode Buffer Layer
Abstract
We focus on the contact between the anode and the electron donor (ED) in organic photovoltaic cells with planar heterojunction configuration. While the fullerene was the electron acceptor (EA), the terthiophene-pyran-malonitrile (T3PM) has been used as electron donor (ED). The HOMO and LUMO of T3PM have been estimated by electrochemical characterization to be –3.5 eV and –5.5 eV, which shows that it can be used as electron donor in a heterojunction with fullerene. The ITO contact plays a critical role in determining device efficiency, and the introduction of a thin anode buffer layer (ABL) between the ITO and the ED induces a significant improvement of the device efficiency. Different ABL have been used, the well-known Au and MoO3 and a more original, CuI, alone or coupled with MoO3. The thicknesses were 0.5 nm, 3.5 nm and 3 nm for Au, MoO3 and CuI respectively. It is shown that the ABL improve the cells performances. The best results are achieved with the couple MoO3/CuI through an increase of the open circuit voltage (Voc). Such improvement has been attributed to an increase of the shunt resistance. The influence of the ABLs can be explained partly by the fact that it raises the anode work function. Nevertheless, a study of the structures T3PM/ABL/ITO shows that the T3PM films grown on CuI are the most homogeneous which can explain the rise of the shunt resistance and therefore of Voc.
Related
- Efficiency Enhancement of Organic Solar Cell Via Incorporation of Ag NPs and Moth-Eye-like Structure
- Multi-electron chemistry for high-energy-density aqueous organic redox flow batteries.
- Effect of Passive Prechamber and Direct Water Injection on Performance and Efficiency Improvement within a Gasoline Engine
- Charge-Transfer-State Descriptors from Donor–Acceptor Interfaces Enable Improved Prediction of Indoor Organic Photovoltaic Efficiency
- A comprehensive review on heteroatom engineering in fused-ring electron acceptors: from molecular design to device efficiency
BibTeX
@article{bernede2026improvement,
title = {{Improvement of the Efficiency of Organic Solar Cells Using the Terthiophene-Pyran-Malononitrile (T3PM) as Electron Donor, through the use of a MoO3/CuI Anode Buffer Layer}},
author = {J.C. Bernède and L. Cattin and M. Morsli and S.R.B. Kanth and S. Patil and N. Stephant},
journal = {Energy Procedia},
year = {2026},
month = sep,
doi = {10.1016/j.egypro.2012.11.168},
url = {https://hal.science/hal-05742725v1},
note = {CC BY-NC-ND},
}
RIS
TY - JOUR
TI - Improvement of the Efficiency of Organic Solar Cells Using the Terthiophene-Pyran-Malononitrile (T3PM) as Electron Donor, through the use of a MoO3/CuI Anode Buffer Layer
AU - J.C. Bernède
AU - L. Cattin
AU - M. Morsli
AU - S.R.B. Kanth
AU - S. Patil
AU - N. Stephant
PY - 2026
DA - 2026/09/08
JO - Energy Procedia
DO - 10.1016/j.egypro.2012.11.168
UR - https://hal.science/hal-05742725v1
AB - We focus on the contact between the anode and the electron donor (ED) in organic photovoltaic cells with planar heterojunction configuration. While the fullerene was the electron acceptor (EA), the terthiophene-pyran-malonitrile (T3PM) has been used as electron donor (ED). The HOMO and LUMO of T3PM have been estimated by electrochemical characterization to be –3.5 eV and –5.5 eV, which shows that it can be used as electron donor in a heterojunction with fullerene. The ITO contact plays a critical role in determining device efficiency, and the introduction of a thin anode buffer layer (ABL) between the ITO and the ED induces a significant improvement of the device efficiency. Different ABL have been used, the well-known Au and MoO3 and a more original, CuI, alone or coupled with MoO3. The thicknesses were 0.5 nm, 3.5 nm and 3 nm for Au, MoO3 and CuI respectively. It is shown that the ABL improve the cells performances. The best results are achieved with the couple MoO3/CuI through an increase of the open circuit voltage (Voc). Such improvement has been attributed to an increase of the shunt resistance. The influence of the ABLs can be explained partly by the fact that it raises the anode work function. Nevertheless, a study of the structures T3PM/ABL/ITO shows that the T3PM films grown on CuI are the most homogeneous which can explain the rise of the shunt resistance and therefore of Voc.
SN - 1876-6102
ER -