Experimental evaluation of smart water flooding in heterogeneous carbonate reservoirs under high pressure and high temperature for enhanced oil recovery
Abstract
Smart-water flooding has emerged as a promising enhanced oil recovery (EOR) technique for improving oil production from heterogeneous carbonate reservoirs. This study experimentally evaluates engineered smart-brine injection using five carbonate core plugs from the WQ1-57 oilfield under high-pressure and high-temperature (HPHT) conditions. Three flooding scenarios were investigated sequentially: formation-water flooding, treated-water flooding, and engineered smart-water flooding. Core-flooding experiments were performed to evaluate cumulative oil recovery, differential pressure (ΔP), relative permeability, and effluent-ion behavior. Formation-water flooding produced oil recovery factors ranging from 31.7% to 50.4% OOIP, which increased to 41.2%-57.1% OOIP after treated-water injection and further improved to 47.2%-65.0% OOIP following smart-water flooding, corresponding to an incremental recovery of 16.8–28.9% OOIP over the formation-water case. Relative permeability analysis demonstrated a shift toward more water-wet conditions, accompanied by lower residual oil saturation and improved water-flow characteristics. Effluent-ion analysis confirmed the participation of Ca²⁺, Mg²⁺, and SO₄²⁻ in fluid-rock interactions responsible for wettability alteration. The results also indicated that the tested cores exhibited pronounced permeability heterogeneity (17–1020 mD) compared with the relatively narrow porosity range (19.4–29.3%), resulting in differences in flow behavior and recovery response. The observed recovery improvement demonstrates the potential of engineered smart-water flooding under the investigated HPHT laboratory conditions. Further reservoir-specific investigation, numerical simulation, economic assessment, and pilot-scale validation are required before field implementation.
Related
- Lignin-based nanoparticles as sustainable agents for enhanced oil recovery in sandstone and carbonate reservoirs
- Spatially heterogeneous restoration of spermatogenesis in the mouse testis following experimental cryptorchidism and orchidopexy
- Experimental Evaluation of a Large Fenestrated Physician-Modified Endo-wheat Using a Cadaveric Model
- Evaluation of segmental skin temperature cooling responses in a summer electric vehicle cabin using a thermophysiological model
- An Experimental Evaluation of Assessment Reactivity in Ecological Momentary Assessment of Alcoholics Anonymous Involvement and Alcohol-Related Outcomes: One Day at a Time
BibTeX
@article{alwan2026experimental,
title = {{Experimental evaluation of smart water flooding in heterogeneous carbonate reservoirs under high pressure and high temperature for enhanced oil recovery}},
author = {Ahmed Al Alwan and Ehsan Khamehchi},
journal = {Scientific Reports},
year = {2026},
month = oct,
doi = {10.1038/s41598-026-74497-1},
url = {https://www.nature.com/articles/s41598-026-74497-1},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Experimental evaluation of smart water flooding in heterogeneous carbonate reservoirs under high pressure and high temperature for enhanced oil recovery
AU - Ahmed Al Alwan
AU - Ehsan Khamehchi
PY - 2026
DA - 2026/10/05
JO - Scientific Reports
DO - 10.1038/s41598-026-74497-1
UR - https://www.nature.com/articles/s41598-026-74497-1
AB - Smart-water flooding has emerged as a promising enhanced oil recovery (EOR) technique for improving oil production from heterogeneous carbonate reservoirs. This study experimentally evaluates engineered smart-brine injection using five carbonate core plugs from the WQ1-57 oilfield under high-pressure and high-temperature (HPHT) conditions. Three flooding scenarios were investigated sequentially: formation-water flooding, treated-water flooding, and engineered smart-water flooding. Core-flooding experiments were performed to evaluate cumulative oil recovery, differential pressure (ΔP), relative permeability, and effluent-ion behavior. Formation-water flooding produced oil recovery factors ranging from 31.7% to 50.4% OOIP, which increased to 41.2%-57.1% OOIP after treated-water injection and further improved to 47.2%-65.0% OOIP following smart-water flooding, corresponding to an incremental recovery of 16.8–28.9% OOIP over the formation-water case. Relative permeability analysis demonstrated a shift toward more water-wet conditions, accompanied by lower residual oil saturation and improved water-flow characteristics. Effluent-ion analysis confirmed the participation of Ca²⁺, Mg²⁺, and SO₄²⁻ in fluid-rock interactions responsible for wettability alteration. The results also indicated that the tested cores exhibited pronounced permeability heterogeneity (17–1020 mD) compared with the relatively narrow porosity range (19.4–29.3%), resulting in differences in flow behavior and recovery response. The observed recovery improvement demonstrates the potential of engineered smart-water flooding under the investigated HPHT laboratory conditions. Further reservoir-specific investigation, numerical simulation, economic assessment, and pilot-scale validation are required before field implementation.
SN - 2045-2322
ER -