Solvent-Free Synthesis of Highly Luminescent Solid-State Boric Acid-Assisted Carbon Dots for Stable and High-Contrast Latent Fingerprint Visualization
4 affiliations
- 1Nanome Nanotechnology Co. , ,
- 2Abdullah Gul University , , ,
- 3Erciyes University , , ,
- 4UNAM─Institute of Materials Science and Nanotechnology Bilkent University , Bilkent, ,
Abstract
The development of efficient, stable, and environmentally friendly fluorescent materials for latent fingerprint visualization remains a major challenge in forensic science. Carbon dots (CDs) have emerged as promising fluorescent nanomaterials owing to their low toxicity, tunable optical properties, and eco-friendly nature. However, their practical application in solid-state systems is often hindered by aggregation-induced quenching (AIQ), which can significantly suppress fluorescence emission. In this study, highly luminescent boric acid-assisted carbon dots (B-CDs) were synthesized through a simple, rapid, and solvent-free thermal process using citric acid, urea, and boric acid as precursors. Unlike conventional approaches, the developed method enables the direct formation of solid-state emissive carbon dot powders without requiring additional surface passivation, purification, or polymeric matrices. Structural and spectroscopic characterizations supported the successful formation of heteroatom-functionalized B-CDs that exhibit excitation-dependent photoluminescence and strong solid-state emission. The synthesized B-CDs exhibited a high solid-state photoluminescence quantum yield of 77.5%. The B-CDs showed strong short-term stability, retaining more than 95% of their initial PL intensity after 60 min exposure to 95% relative humidity and during short-term thermal treatment up to 90 °C. Long-term measurements showed approximately 57% PL retention after 5 days at 95% relative humidity and approximately 48% after 5 days of thermal aging at 50 °C, while approximately 92% of the initial PL intensity was retained after 5 days of continuous UV irradiation. The proposed solvent-free synthesis strategy offers a simple and potentially scalable route for producing strongly emissive solid-state carbon dots, highlighting their potential for latent fingerprint visualization.
Related
- A water-soluble pyrazinium-based chemosensor for TNP detection: applications in MCF-7 cancer cell imaging and fingerprint visualization.
- A multifunctional Tb3+–salicylic acid hydrazide phosphor for anti-counterfeiting, forensic fingerprint visualization, and biological applications
- Highly Luminescent Alkyl- and Alkoxy-Terminated Silicon Quantum Dots via Aging Following Single-Step Plasma Synthesis and Functionalization
- Synthesis and characterization of luminescent properties of ceramics derived from polysilylcarbodiimides
- Practical synthesis and photophysical characterization of full-color circularly polarized luminescent 4,7-diaryl-5,6-( R / S )-BINOL- O -[2,1,3]benzothiadiazoles
BibTeX
@article{ocal2026solventfree,
title = {{Solvent-Free Synthesis of Highly Luminescent Solid-State Boric Acid-Assisted Carbon Dots for Stable and High-Contrast Latent Fingerprint Visualization}},
author = {Sema Karabel Ocal and Kevser Sahin Tiras and Evren Mutlugun},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c08569},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08569/5454850/Solvent-Free-Synthesis-of-Highly-Luminescent-Solid},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Solvent-Free Synthesis of Highly Luminescent Solid-State Boric Acid-Assisted Carbon Dots for Stable and High-Contrast Latent Fingerprint Visualization
AU - Sema Karabel Ocal
AU - Kevser Sahin Tiras
AU - Evren Mutlugun
PY - 2026
DA - 2026/10/20
JO - ACS Omega
DO - 10.1021/acsomega.6c08569
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08569/5454850/Solvent-Free-Synthesis-of-Highly-Luminescent-Solid
AB - The development of efficient, stable, and environmentally friendly fluorescent materials for latent fingerprint visualization remains a major challenge in forensic science. Carbon dots (CDs) have emerged as promising fluorescent nanomaterials owing to their low toxicity, tunable optical properties, and eco-friendly nature. However, their practical application in solid-state systems is often hindered by aggregation-induced quenching (AIQ), which can significantly suppress fluorescence emission. In this study, highly luminescent boric acid-assisted carbon dots (B-CDs) were synthesized through a simple, rapid, and solvent-free thermal process using citric acid, urea, and boric acid as precursors. Unlike conventional approaches, the developed method enables the direct formation of solid-state emissive carbon dot powders without requiring additional surface passivation, purification, or polymeric matrices. Structural and spectroscopic characterizations supported the successful formation of heteroatom-functionalized B-CDs that exhibit excitation-dependent photoluminescence and strong solid-state emission. The synthesized B-CDs exhibited a high solid-state photoluminescence quantum yield of 77.5%. The B-CDs showed strong short-term stability, retaining more than 95% of their initial PL intensity after 60 min exposure to 95% relative humidity and during short-term thermal treatment up to 90 °C. Long-term measurements showed approximately 57% PL retention after 5 days at 95% relative humidity and approximately 48% after 5 days of thermal aging at 50 °C, while approximately 92% of the initial PL intensity was retained after 5 days of continuous UV irradiation. The proposed solvent-free synthesis strategy offers a simple and potentially scalable route for producing strongly emissive solid-state carbon dots, highlighting their potential for latent fingerprint visualization.
SN - 2470-1343
ER -