Biomechanical effects of load-carrying in adolescent idiopathic scoliosis: a subject-specific musculoskeletal modelling study
- 1Indian Institute of Technology Delhi, New Delhi
Abstract
Load carrying is a common activity during adolescence, yet its biomechanical consequences for the structurally asymmetric spine in adolescent idiopathic scoliosis (AIS) remain poorly understood. This study investigated how load magnitude, carrying height, and side of application influence spinal loading and paraspinal muscle forces in AIS. A subject-specific musculoskeletal model of a 16-year-old female with a 59{degrees} right-convex thoracic curve was used to simulate bilateral and unilateral load carrying at the hand, chest, and above-shoulder levels, with loads corresponding to 5%, 10%, and 15% of body weight. Intervertebral compressive and lateral forces and erector spinae (ES) and multifidus (MF) muscle forces were evaluated. Spinal loading increased progressively with load magnitude and carrying height. At 15% body weight, compressive forces at the curve apex increased from 511-566 N at hand level to 721-831 N above the shoulder. Unilateral carrying produced distinct side-dependent responses: convex-side carrying generated greater compressive forces, whereas concave-side carrying generated greater lateral forces, which were concentrated around the curve apex. Paraspinal muscles also exhibited muscle-specific responses. ES forces primarily reflected the imposed external asymmetry, with unilateral carrying eliciting predominantly contralateral recruitment, whereas MF maintained a characteristic convex-side dominance concentrated around the curve apex. These findings demonstrate that load carrying in AIS produces a coupled biomechanical response governed by both the external loading configuration and the pre-existing structural asymmetry of the spine, highlighting the importance of considering loading direction and muscular adaptation alongside load magnitude when evaluating everyday carrying activities in AIS.
Related
- Influence of trunk posture on spinal loading and paraspinal muscle forces in adolescent idiopathic scoliosis: a subject-specific musculoskeletal modelling study
- Spinal energy balance can predict post-operative spine alignment in Lenke 1 Adolescent Idiopathic Scoliosis
- Thoracic kyphosis is associated with somatosensory dependence and postural control in adolescent idiopathic scoliosis
- Patient‐Informed Biomechanical Modeling Reveals Mechanical Mechanism of Brain Damage in Idiopathic Normal Pressure Hydrocephalus
- Extending Musculoskeletal Modelling Validation Beyond Gait: Knee Loading and Kinematics During Daily Activities
BibTeX
@misc{bhattacharya2026biomechanical,
title = {{Biomechanical effects of load-carrying in adolescent idiopathic scoliosis: a subject-specific musculoskeletal modelling study}},
author = {R. Bhattacharya and B. Garg and R. Malhotra and R. Ghosh and A. Chawla and K. Mukherjee},
howpublished = {bioRxiv},
year = {2026},
month = oct,
doi = {10.64898/2026.10.27.762384},
url = {https://www.biorxiv.org/content/10.64898/2026.10.27.762384v1},
note = {CC BY},
}
RIS
TY - UNPB
TI - Biomechanical effects of load-carrying in adolescent idiopathic scoliosis: a subject-specific musculoskeletal modelling study
AU - R. Bhattacharya
AU - B. Garg
AU - R. Malhotra
AU - R. Ghosh
AU - A. Chawla
AU - K. Mukherjee
PY - 2026
DA - 2026/10/27
PB - bioRxiv
DO - 10.64898/2026.10.27.762384
UR - https://www.biorxiv.org/content/10.64898/2026.10.27.762384v1
AB - Load carrying is a common activity during adolescence, yet its biomechanical consequences for the structurally asymmetric spine in adolescent idiopathic scoliosis (AIS) remain poorly understood. This study investigated how load magnitude, carrying height, and side of application influence spinal loading and paraspinal muscle forces in AIS. A subject-specific musculoskeletal model of a 16-year-old female with a 59{degrees} right-convex thoracic curve was used to simulate bilateral and unilateral load carrying at the hand, chest, and above-shoulder levels, with loads corresponding to 5%, 10%, and 15% of body weight. Intervertebral compressive and lateral forces and erector spinae (ES) and multifidus (MF) muscle forces were evaluated. Spinal loading increased progressively with load magnitude and carrying height. At 15% body weight, compressive forces at the curve apex increased from 511-566 N at hand level to 721-831 N above the shoulder. Unilateral carrying produced distinct side-dependent responses: convex-side carrying generated greater compressive forces, whereas concave-side carrying generated greater lateral forces, which were concentrated around the curve apex. Paraspinal muscles also exhibited muscle-specific responses. ES forces primarily reflected the imposed external asymmetry, with unilateral carrying eliciting predominantly contralateral recruitment, whereas MF maintained a characteristic convex-side dominance concentrated around the curve apex. These findings demonstrate that load carrying in AIS produces a coupled biomechanical response governed by both the external loading configuration and the pre-existing structural asymmetry of the spine, highlighting the importance of considering loading direction and muscular adaptation alongside load magnitude when evaluating everyday carrying activities in AIS.
ER -