The impact of an in-situ stress gradient on the growth of a fluid-driven frictional rupture
Abstract
Models of injection-induced aseismic slip commonly assume uniform in-situ stresses along the fault, and thus predict rupture growth symmetric about the injection point. We relax this assumption and account for linear variations with depth of the resolved shear and effective normal tractions. We consider a planar fault with constant friction under plane-strain conditions, subjected to fluid injection at constant overpressure. Vanishing stress intensity factors at both rupture tips yield two coupled equations for the up-dip and down-dip tip positions. We solve them semi-analytically and compare the results with numerical simulations. The stress gradient notably breaks the self-similarity of the uniform-stress solution. Growth is then governed by two parameters. The first is the fault-stress injection parameter 𝒯, ratio between the initial distance to failure at the injection point and the effect of the fluid overpressure. The second is the ratio of the diffusion length √(4αt) to a stress-gradient length scale Lc, namely the initial distance to failure at the injection point divided by its gradient along the fault. Growth is symmetric at early times. In the marginally pressurized regime, rupture lags behind the pressure front and the relative asymmetry grows as 1.1 (4αt/Lc2)1/2. The up-dip tip then accelerates markedly compared to the down-dip tip. In the critically stressed regime, rupture outpaces diffusion by a factor of order 1/𝒯, and the relative asymmetry grows as ∼ 0.34 (4αt/𝒯2Lc2)1/2. The up-dip tip reaches ∼ Lc earlier, and the ratio of up-dip to down-dip rupture lengths remains below two.
Related
- The impact of leachate from waste rubber particles on duckweed: growth, oxidative stress, and cell structure
- Influence of fluid chemical composition on fracture toughness and frictional strength weakening: Sandstone brittle and ductile strength constraints
- Drought severity determines the effectiveness of straw mulching in alleviating water stress during early maize growth
- Growth–defense trade-offs in Quercus variabilis and Quercus mongolica seedlings under drought stress
- Dynamic response and energy dissipation-transfer characteristics of coal subjected to impact loading under coupled thermo-gas-stress conditions
BibTeX
@misc{fakhretdinova2026impact,
title = {{The impact of an in-situ stress gradient on the growth of a fluid-driven frictional rupture}},
author = {Regina Fakhretdinova and Brice Lecampion},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.38921},
eprint = {2610.38921},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.38921},
note = {CC BY-NC-SA 4.0},
}
RIS
TY - UNPB
TI - The impact of an in-situ stress gradient on the growth of a fluid-driven frictional rupture
AU - Regina Fakhretdinova
AU - Brice Lecampion
PY - 2026
DA - 2026/10/28
PB - arXiv
DO - 10.48550/arxiv.2610.38921
UR - https://arxiv.org/abs/2610.38921
AB - Models of injection-induced aseismic slip commonly assume uniform in-situ stresses along the fault, and thus predict rupture growth symmetric about the injection point. We relax this assumption and account for linear variations with depth of the resolved shear and effective normal tractions. We consider a planar fault with constant friction under plane-strain conditions, subjected to fluid injection at constant overpressure. Vanishing stress intensity factors at both rupture tips yield two coupled equations for the up-dip and down-dip tip positions. We solve them semi-analytically and compare the results with numerical simulations. The stress gradient notably breaks the self-similarity of the uniform-stress solution. Growth is then governed by two parameters. The first is the fault-stress injection parameter 𝒯, ratio between the initial distance to failure at the injection point and the effect of the fluid overpressure. The second is the ratio of the diffusion length √(4αt) to a stress-gradient length scale L_c, namely the initial distance to failure at the injection point divided by its gradient along the fault. Growth is symmetric at early times. In the marginally pressurized regime, rupture lags behind the pressure front and the relative asymmetry grows as 1.1 (4αt/L_c^2)^1/2. The up-dip tip then accelerates markedly compared to the down-dip tip. In the critically stressed regime, rupture outpaces diffusion by a factor of order 1/𝒯, and the relative asymmetry grows as ∼ 0.34 (4αt/𝒯^2L_c^2)^1/2. The up-dip tip reaches ∼ L_c earlier, and the ratio of up-dip to down-dip rupture lengths remains below two.
ER -