Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 36 min ago
Peer-reviewedCC BYNanophotonics

Suppressing Stitching Errors in Full‐Sensor‐Plane Color Routers via Optical Structural Similarity

4 affiliations
  1. 1Department of Electronic Engineering Hanyang University Seoul Republic of Korea
  2. 2Department of Artificial Intelligence Semiconductor Engineering Hanyang University Seoul Republic of Korea
  3. 3School of Electrical Engineering Korea Advanced Institute of Science and Technology Daejeon Republic of Korea
  4. 4Department of Artificial Intelligence Hanyang University Seoul Republic of Korea

Abstract

Nanophotonic color routers promise higher photon utilization than absorptive color filters for complementary metal‐oxide‐semiconductor (CMOS) image sensors, yet most reported designs remain optimized for normal incidence, with efficiency dropping to about half of its peak by . Here, we present an angle‐specific inverse‐design framework in which the sensor plane is partitioned into local angular zones, and each zone is assigned a dedicated color‐router unit cell. To enable practical assembly of these heterogeneous unit cells, we introduce an optical structural similarity (OSS) constraint that enforces permittivity‐level continuity between neighboring cells during topology optimization without additional full‐wave simulations. In a three‐dimensional freeform library, the optimized unit cells achieve average optical efficiencies of 91.1%, 80.9%, and 83.9% for the red, green, and blue channels, respectively, with optical cross talk below 2.0%. OSS reduces the average stitching error from 24.6% to 5.99%, suggesting that it may provide an effective means of suppressing stitching errors in metasurface designs based on the locally periodic approximation. The framework further extends to a five‐layer architecture with a comparable stitching error of 5.65%, establishing a practical route to oblique‐incidence‐robust, library‐based color routing and, more broadly, to large‐area metasurfaces requiring spatially varying functionality with robust inter‐cell compatibility.

Related

  1. Comparative Analysis of Starch-Based Films Functionalized with Bixa orellana Fruit and Leaf Extracts: A Multiscale Structural, Morphological, and Optical Characterization
    Moisés Gallozzo-Cárdenas, Renny Nazario-Naveda, Luis Angelats-Silva
    PolymersPeer-reviewedCC BYFull textMaterials & polymersEurope PMC
  2. Novel Lead-free double perovskite Cs2LiFeBr6 as photovoltaics: a DFT study of structural, mechanical, spin-resolved electronic and optical properties
    Fazle Hasan Falak, Khandoker Maruf Bin Islam, Nusrat Jahan Hridita +1
    ChemRxivPreprintLicence not statedGeneral chemistryChemRxiv
  3. First-Principles Calculations of Structural, Electronic, Optical, Vibrational, Dielectric, and Elastic Properties of Tetragonal Mg2TiO4 and Mg2TiO4:Mn4+
    Leonid L. Rusevich, Eugene A. Kotomin, Miroslav D. Dramićanin +2
    Nanomaterials (Basel, Switzerland)Peer-reviewedCC BYFull textMaterials & polymersEurope PMC
  4. Photo-Stitching of Nitroalkanes via Cross-Denitrative Olefination
    Joshua K. Mitchell, Shrey P. Desai, Joseph M. Bergen +5
    Journal of the American Chemical SocietyPeer-reviewedCC BYFull text5 citedOrganic chemistryOpenAlex
  5. Structural, morphological and optical properties of Cd0.7Fe2.3O4 thin films deposited on glass and quartz substrates and electrical investigation of Cd0.7Fe2.3O4/n-Si heterostructure
    M. Smiti, S. Mourad, Rehab Ramadan +6
    Journal of Materials Science: Materials in ElectronicsPeer-reviewedCC BYFull textMaterials & polymersHAL
BibTeX
@article{kim2026suppressing,
  title = {{Suppressing Stitching Errors in Full‐Sensor‐Plane Color Routers via Optical Structural Similarity}},
  author = {Donghyun Kim and JUNSEO HAN and Seunghyun Lee and Min Seok Jang and Haejun Chung},
  journal = {Nanophotonics},
  year = {2026},
  month = jul,
  doi = {10.1002/nap2.70220},
  url = {https://doi.org/10.1002/nap2.70220},
  note = {CC BY},
}
RIS
TY  - JOUR
TI  - Suppressing Stitching Errors in Full‐Sensor‐Plane Color Routers via Optical Structural Similarity
AU  - Donghyun Kim
AU  - JUNSEO HAN
AU  - Seunghyun Lee
AU  - Min Seok Jang
AU  - Haejun Chung
PY  - 2026
DA  - 2026/07/20
JO  - Nanophotonics
DO  - 10.1002/nap2.70220
UR  - https://doi.org/10.1002/nap2.70220
AB  - Nanophotonic color routers promise higher photon utilization than absorptive color filters for complementary metal‐oxide‐semiconductor (CMOS) image sensors, yet most reported designs remain optimized for normal incidence, with efficiency dropping to about half of its peak by . Here, we present an angle‐specific inverse‐design framework in which the sensor plane is partitioned into local angular zones, and each zone is assigned a dedicated color‐router unit cell. To enable practical assembly of these heterogeneous unit cells, we introduce an optical structural similarity (OSS) constraint that enforces permittivity‐level continuity between neighboring cells during topology optimization without additional full‐wave simulations. In a three‐dimensional freeform library, the optimized unit cells achieve average optical efficiencies of 91.1%, 80.9%, and 83.9% for the red, green, and blue channels, respectively, with optical cross talk below 2.0%. OSS reduces the average stitching error from 24.6% to 5.99%, suggesting that it may provide an effective means of suppressing stitching errors in metasurface designs based on the locally periodic approximation. The framework further extends to a five‐layer architecture with a comparable stitching error of 5.65%, establishing a practical route to oblique‐incidence‐robust, library‐based color routing and, more broadly, to large‐area metasurfaces requiring spatially varying functionality with robust inter‐cell compatibility.
SN  - 2192-8614
SN  - 2192-8606
ER  -