Sidewall-Based Three-Dimensional DC Resistivity Imaging for Identifying Potentially Water-Bearing Zones Around an Operational Railway Tunnel
- 1Geophysical Modelling Group (GMG), Department of Geophysical Engineering, Faculty of Engineering, Ankara University, 06830 Ankara, Türkiye
Abstract
Groundwater ingress and moisture-related deterioration threaten railway tunnels in fractured and hydrogeologically active terrains. This study evaluates sidewall-based three-dimensional (3D) direct current resistivity (DCR) imaging for investigating potentially water-bearing conductive zones around an operational railway tunnel in Sivas, Türkiye, where crown measurements were operationally impractical. Field data were acquired along three profiles on opposing tunnel sidewalls and inverted using an unstructured tetrahedral mesh representing the tunnel cavity and acquisition geometry. The field model revealed low-resistivity zones adjacent to both sidewalls, with some features extending towards and above the crown. A field-informed synthetic reference model was used to assess survey-dependent recoverability rather than independent validation. The sidewall configuration recovered the principal conductive structures and their upward continuity, whereas longer parallel surface profiles recovered them more broadly and less distinctly. LiDAR intensity variations and field-observed wet areas provided complementary qualitative indications of surface moisture. Overall, sidewall-based 3D DCR imaging, combined with sensitivity and field-informed recoverability assessment, provides a practical strategy for operational tunnels where circumferential measurements or intrusive verification are difficult.
Related
- Meteolakes: An operational online three-dimensional forecasting platform for lake hydrodynamics
- Damage Assessment of Supporting Pillars in an Underground Cave Using Joint Inversion of Electrical Resistivity and P-wave Velocity, Burgundy (France)
- A comparative study of pseudo-dipole arrays and standard arrays based on the high-density DC resistivity method
- Joint 3D resistivity inversion of ground-based MT and CSEM data to improve resolution for deep mineral exploration
- Continental-scale probabilistic resistivity imaging of Australia using deep learning: Implications for geology, groundwater, and critical minerals
BibTeX
@article{gundogdu2026sidewallbased,
title = {{Sidewall-Based Three-Dimensional DC Resistivity Imaging for Identifying Potentially Water-Bearing Zones Around an Operational Railway Tunnel}},
author = {N. Yıldırım Gündoğdu},
journal = {Geosciences},
year = {2026},
month = oct,
doi = {10.3390/geosciences16100402},
url = {https://doi.org/10.3390/geosciences16100402},
note = {CC BY},
}
RIS
TY - JOUR
TI - Sidewall-Based Three-Dimensional DC Resistivity Imaging for Identifying Potentially Water-Bearing Zones Around an Operational Railway Tunnel
AU - N. Yıldırım Gündoğdu
PY - 2026
DA - 2026/10/26
JO - Geosciences
DO - 10.3390/geosciences16100402
UR - https://doi.org/10.3390/geosciences16100402
AB - Groundwater ingress and moisture-related deterioration threaten railway tunnels in fractured and hydrogeologically active terrains. This study evaluates sidewall-based three-dimensional (3D) direct current resistivity (DCR) imaging for investigating potentially water-bearing conductive zones around an operational railway tunnel in Sivas, Türkiye, where crown measurements were operationally impractical. Field data were acquired along three profiles on opposing tunnel sidewalls and inverted using an unstructured tetrahedral mesh representing the tunnel cavity and acquisition geometry. The field model revealed low-resistivity zones adjacent to both sidewalls, with some features extending towards and above the crown. A field-informed synthetic reference model was used to assess survey-dependent recoverability rather than independent validation. The sidewall configuration recovered the principal conductive structures and their upward continuity, whereas longer parallel surface profiles recovered them more broadly and less distinctly. LiDAR intensity variations and field-observed wet areas provided complementary qualitative indications of surface moisture. Overall, sidewall-based 3D DCR imaging, combined with sensitivity and field-informed recoverability assessment, provides a practical strategy for operational tunnels where circumferential measurements or intrusive verification are difficult.
SN - 2076-3263
ER -