Use of Poly-Lactic Acid (PLA) to Enhance Properties of Paper Based on Recycled Pulp
Abstract
Nowadays, recycled paper is broadly used due to environmental reasons. Furthermore, the addition of starch as a dry strength additive improves the properties of recycled paper. Poly-Lactic Acid (PLA), a product from bio-refinery process, has recently been shown to act as a promising strength additive that could be used in combination with starch to further improve the strength of paper. In this study, the use of PLA of three molecular weights (MW) in combination with four different starches was investigated. Three recycled pulps from different origins, with the kappa number of 27.9 to 66 were used. Paper handsheets were made, and selected paper properties were tested. The results indicate that handsheets properties were influenced by the MW of PLAs, the type of starch used, and the lignin content of the pulp. The paper handsheets made from lignin-rich pulp (pulp A, kappa number 66), combined with 0.1% medium MW PLA (PLA_1) and 0.9% cationic starch containing 0.43% N gave the highest improvement for tensile strength, wet tensile strength, air and water resistance. This result verifies that a higher kappa number pulp has better attraction to the hydrophobic PLA. Moreover, the higher charge cationic starch led to higher tensile strength due to the increase of affinity to the anionic fiber surface. Interestingly, results show that amphoteric starch is a promising substitute for high cationic charge starch when combined with the medium MW PLA to improve tensile strength of paper. This study demonstrated that a starch-PLA blend represents a promising approach in improving properties of recycled paper.
Related
- Preparation and Characterization of Immediate-Release Tablets Containing Calcium Lactate Recovered from Chemically Recycled Poly(lactic acid) 3D Printing Filaments
- Poly(lactic acid) - PLA as sustainable building block to enhance structural stability and performance of PEO-based electrolytes
- How chitosan-clay-based coatings contribute to improved poly(lactic acid) (PLA) film properties
- Parallel mechanochemical synthesis of phenolic drug–poly(lactic acid) conjugates using a multi-tube BenchMixer/vortexer
- Poly(lactic acid) nanoplastics through laser ablation: establishing a reference model for mimicking biobased nanoplastics in aquatic environments
BibTeX
@article{doelle2026polylactic,
title = {{Use of Poly-Lactic Acid (PLA) to Enhance Properties of Paper Based on Recycled Pulp}},
author = {Klaus Doelle and Anh Le and Thomas Amidon and Biljana Bujanovic},
journal = {Advances in Chemical Engineering and Science},
year = {2026},
month = aug,
doi = {10.4236/aces.2014.43038},
url = {https://hal.science/hal-05733261v1},
note = {CC BY},
}
RIS
TY - JOUR
TI - Use of Poly-Lactic Acid (PLA) to Enhance Properties of Paper Based on Recycled Pulp
AU - Klaus Doelle
AU - Anh Le
AU - Thomas Amidon
AU - Biljana Bujanovic
PY - 2026
DA - 2026/08/31
JO - Advances in Chemical Engineering and Science
DO - 10.4236/aces.2014.43038
UR - https://hal.science/hal-05733261v1
AB - Nowadays, recycled paper is broadly used due to environmental reasons. Furthermore, the addition of starch as a dry strength additive improves the properties of recycled paper. Poly-Lactic Acid (PLA), a product from bio-refinery process, has recently been shown to act as a promising strength additive that could be used in combination with starch to further improve the strength of paper. In this study, the use of PLA of three molecular weights (MW) in combination with four different starches was investigated. Three recycled pulps from different origins, with the kappa number of 27.9 to 66 were used. Paper handsheets were made, and selected paper properties were tested. The results indicate that handsheets properties were influenced by the MW of PLAs, the type of starch used, and the lignin content of the pulp. The paper handsheets made from lignin-rich pulp (pulp A, kappa number 66), combined with 0.1% medium MW PLA (PLA_1) and 0.9% cationic starch containing 0.43% N gave the highest improvement for tensile strength, wet tensile strength, air and water resistance. This result verifies that a higher kappa number pulp has better attraction to the hydrophobic PLA. Moreover, the higher charge cationic starch led to higher tensile strength due to the increase of affinity to the anionic fiber surface. Interestingly, results show that amphoteric starch is a promising substitute for high cationic charge starch when combined with the medium MW PLA to improve tensile strength of paper. This study demonstrated that a starch-PLA blend represents a promising approach in improving properties of recycled paper.
ER -