Observation modes of EarthCARE/CPR with different Doppler measurement accuracy: evaluation of their applicability
- 1Japan Aerospace Exploration Agency (Tokyo, Japan)
- 2Japan Aerospace Exploration Agency, Tsukuba, Ibaraki 305-8505, Japan
- 3Research Institute for Applied Mechanics, Kyushu University, Fukuoka, Japan
Abstract
An accurate characterization of cloud vertical motion is essential for understanding cloud microphysical and dynamical processes. The Cloud Profiling Radar (CPR) onboard the Earth Cloud Aerosol and Radiation Explorer (EarthCARE) satellite, launched in May 2024, enables the first global measurements of Doppler velocity from space. The CPR operates in three observation modes—16-km, 18-km, and 20-km modes—each characterized by a distinct pulse repetition frequency (PRF), which determines the Doppler velocity data quality, the maximum observable altitude, and the likelihood of spurious high-altitude echoes known as mirror images. This study quantitatively evaluates the applicability of these three modes using actual CPR observations, focusing on these three aspects. The standard deviation (STD) of Doppler velocity, used as an indicator of measurement noise, indicated that the 16-km and 18-km modes provide more accurate Doppler measurements than the 20-km mode, with comparable STD values between the former two. Clouds above 16 km were primarily observed between 0° and 40° latitude, while clouds exceeding 18 km were rare, suggesting that the 18-km or 20-km modes are suitable for observation in these regions. The risk of overlap between genuine cloud echoes and mirror images at high altitudes was highest in the 16-km and 18-km modes but was largely confined to low-latitude regions (approximately 0°–40°). Accordingly, without considering mirror image-related risks, the 16-km mode is preferable at latitudes above 40°, where high clouds are infrequent and Doppler measurement accuracy is highest. In contrast, the 18-km mode provides an optimal balance between Doppler accuracy and vertical coverage at lower latitudes. It should be noted, however, that high-PRF modes inherently increase the likelihood of mirror image contamination. These results demonstrate, for the first time using actual EarthCARE observations, trade-offs among Doppler measurement accuracy, observation height, and spurious echo contamination across CPR operational modes. Future work should involve continuous assessments of the balance between Doppler accuracy and mirror image contamination to determine the optimal implementation of each mode as a function of latitude.
Related
- Scaling methodology for supercritical CO2 extraction process: applicability of the solvent-to-feed mass ratio criterion under different flow directions and extraction basket geometries
- Simultaneous ground-based observations of a large quasi 26 d wave from three different measurement sites in northern mid-latitudes
- Airborne Validation of Cloud Spatial Properties from the ATLID Instrument on EarthCARE
- Satellite–Ground Intercomparison between EarthCARE/ATLID and the China Aerosol Raman Lidar Network (CARLNET): Part I. Case Studies
- Agentic Large Language Model Workflows for Earth Observation: Tool Orchestration, Foundation-Model Adaptation, and the Evaluation Gap
BibTeX
@article{imura2026observation,
title = {{Observation modes of EarthCARE/CPR with different Doppler measurement accuracy: evaluation of their applicability}},
author = {Yuki Imura and Shunsuke Aoki and Takuji Kubota and Hirotaka Nakatsuka and Yuichi Ohno and Hajime Okamoto},
journal = {Atmospheric measurement techniques},
year = {2026},
month = sep,
doi = {10.5194/amt-19-5617-2026},
url = {https://doi.org/10.5194/amt-19-5617-2026},
note = {CC BY},
}
RIS
TY - JOUR
TI - Observation modes of EarthCARE/CPR with different Doppler measurement accuracy: evaluation of their applicability
AU - Yuki Imura
AU - Shunsuke Aoki
AU - Takuji Kubota
AU - Hirotaka Nakatsuka
AU - Yuichi Ohno
AU - Hajime Okamoto
PY - 2026
DA - 2026/09/04
JO - Atmospheric measurement techniques
DO - 10.5194/amt-19-5617-2026
UR - https://doi.org/10.5194/amt-19-5617-2026
AB - An accurate characterization of cloud vertical motion is essential for understanding cloud microphysical and dynamical processes. The Cloud Profiling Radar (CPR) onboard the Earth Cloud Aerosol and Radiation Explorer (EarthCARE) satellite, launched in May 2024, enables the first global measurements of Doppler velocity from space. The CPR operates in three observation modes—16-km, 18-km, and 20-km modes—each characterized by a distinct pulse repetition frequency (PRF), which determines the Doppler velocity data quality, the maximum observable altitude, and the likelihood of spurious high-altitude echoes known as mirror images. This study quantitatively evaluates the applicability of these three modes using actual CPR observations, focusing on these three aspects. The standard deviation (STD) of Doppler velocity, used as an indicator of measurement noise, indicated that the 16-km and 18-km modes provide more accurate Doppler measurements than the 20-km mode, with comparable STD values between the former two. Clouds above 16 km were primarily observed between 0° and 40° latitude, while clouds exceeding 18 km were rare, suggesting that the 18-km or 20-km modes are suitable for observation in these regions. The risk of overlap between genuine cloud echoes and mirror images at high altitudes was highest in the 16-km and 18-km modes but was largely confined to low-latitude regions (approximately 0°–40°). Accordingly, without considering mirror image-related risks, the 16-km mode is preferable at latitudes above 40°, where high clouds are infrequent and Doppler measurement accuracy is highest. In contrast, the 18-km mode provides an optimal balance between Doppler accuracy and vertical coverage at lower latitudes. It should be noted, however, that high-PRF modes inherently increase the likelihood of mirror image contamination. These results demonstrate, for the first time using actual EarthCARE observations, trade-offs among Doppler measurement accuracy, observation height, and spurious echo contamination across CPR operational modes. Future work should involve continuous assessments of the balance between Doppler accuracy and mirror image contamination to determine the optimal implementation of each mode as a function of latitude.
SN - 1867-1381
SN - 1867-8548
ER -