Skip to content
DraconiticResearch
Search Sources API
197,768 studies31 sourcesUpdated 27 min ago
Peer-reviewedCC BY 4.0Catalysts

Fabrication of Co-Decorated NiFe-LDH@NF Electrocatalysts for Efficient Catalysis of Glycerol Oxidation Reaction Coupled Water Electrolysis

  1. 1Shandong Key Laboratory of Advanced Electrochemical Energy Storage Technologies, College of New Energy, China University of Petroleum (East China), Qingdao 266580, China

Abstract

The glycerol oxidation reaction (GOR) has emerged as a promising alternative to the oxygen evolution reaction in water electrolysis, owing to its lower thermodynamic oxidation potential (0.69 V vs. RHE) and the value-added nature of its oxidation products. In this work, cobalt species were electrodeposited onto a NiFe layered double hydroxide grown on nickel foam (Co/NiFe-LDH@NF), which was used as an efficient anode for the GOR. The catalyst is derived from a Ni/Fe-based electrode of the type already used in industrial alkaline water electrolysis through a simple electrochemical modification, without changing the electrode substrate or the cell configuration, and the approach is therefore compatible in principle with existing alkaline electrolysis systems. Structural and spectroscopic characterization shows that the sample retains a nanosheet-based architecture with a rougher, partially aggregated surface, and that cobalt is present as mixed-valence Co2+/Co3+ species decorated on the NiFe-LDH surface rather than as a separate crystalline phase. In a glycerol-containing alkaline electrolyte, the Co/NiFe-LDH@NF anode reaches 10 mA cm−2 at 1.271 V vs. RHE in a single measurement, which is 383 mV lower than the potential required by the oxygen evolution reaction (1.654 V vs. RHE) on the same electrode. In two separate chronoamperometric runs, glycerol-assisted water electrolysis produced formate at 0.234 mmol cm−2 h−1 with a Faradaic efficiency of ca. 97% and hydrogen at 32.47 mL cm−2 h−1 with a Faradaic efficiency of ca. 98%. During a 10 h stability test, the catalyst retained approximately 81% of its initial current in a single measurement; we report this as a moderate but measurable decay rather than as a demonstration of long-term durability. This study demonstrates a feasible strategy for designing integrated electrocatalytic systems that co-produce green hydrogen and valuable chemicals using earth-abundant materials, thereby improving both the energy efficiency and economic attractiveness of hydrogen production.

Related

  1. Microwave‐Assisted Polyol Synthesis of Carbon‐Supported Nickel–Molybdenum Alloy Cathode Electrocatalysts for Anion Exchange Membrane Water Electrolysis
    Rossana Gentile, Laura Zeni Cunha, Carlos Campos-Roldán +5
    ChemCatChemPeer-reviewedCC BY 4.0Full textElectrochemistry & energyHAL
  2. Synergistic d-Orbital Interactions and Interfacial Coupling in Metal-Organic Framework-Based Electrocatalysts for Direct Seawater Electrolysis.
    Sofiu Mahmud, Hafiz Adil Qayyum, Sharafadeen Gbadamasi +8
    ChemSusChemPeer-reviewedCC BY-NC-NDFull textElectrochemistry & energyEurope PMC
  3. Exploring nickel-based electrocatalysts for overall alkaline water electrolysis and the hydrogen evolution reaction coupled with the glucose oxidation reaction
    Chinkit Tyagi, Pooja Basera, Sravan Kumar Kilaparthi +6
    Journal of Materials Chemistry APeer-reviewedCC BY-NC 4.0Full textCatalysisMaterials & polymersHAL
  4. Molecular-Level Structure Regulation via Sequential Pre-Crosslinking and Friedel-Crafts Hypercrosslinking: Fabrication of Bimetallic Doped Porous Carbon Electrocatalysts
    Yang Du, Shuo Gao, Jinyuan Zhang
    Molecules (Basel, Switzerland)Peer-reviewedCC BYFull textElectrochemistry & energyEurope PMCCrossref
  5. CoP/Co ₂ P heterostructures embedded in biomass-derived carbons as efficient electrocatalysts for hydrogen and oxygen evolution reactions
    Abdourahmane Dieng, Ahmed Subrati, Zahra Hagheh-Kavousi +5
    RSC AdvancesPeer-reviewedCC BY 4.0Full textElectrochemistry & energyHAL
BibTeX
@article{li2026fabrication,
  title = {{Fabrication of Co-Decorated NiFe-LDH@NF Electrocatalysts for Efficient Catalysis of Glycerol Oxidation Reaction Coupled Water Electrolysis}},
  author = {Liangjun Li and Junwei Shao and Xiaoqin Ke and Wenxuan Wang and Xin Gu},
  journal = {Catalysts},
  year = {2026},
  month = oct,
  doi = {10.3390/catal16110943},
  url = {https://www.mdpi.com/2073-4344/16/11/943},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Fabrication of Co-Decorated NiFe-LDH@NF Electrocatalysts for Efficient Catalysis of Glycerol Oxidation Reaction Coupled Water Electrolysis
AU  - Liangjun Li
AU  - Junwei Shao
AU  - Xiaoqin Ke
AU  - Wenxuan Wang
AU  - Xin Gu
PY  - 2026
DA  - 2026/10/23
JO  - Catalysts
DO  - 10.3390/catal16110943
UR  - https://www.mdpi.com/2073-4344/16/11/943
AB  - The glycerol oxidation reaction (GOR) has emerged as a promising alternative to the oxygen evolution reaction in water electrolysis, owing to its lower thermodynamic oxidation potential (0.69 V vs. RHE) and the value-added nature of its oxidation products. In this work, cobalt species were electrodeposited onto a NiFe layered double hydroxide grown on nickel foam (Co/NiFe-LDH@NF), which was used as an efficient anode for the GOR. The catalyst is derived from a Ni/Fe-based electrode of the type already used in industrial alkaline water electrolysis through a simple electrochemical modification, without changing the electrode substrate or the cell configuration, and the approach is therefore compatible in principle with existing alkaline electrolysis systems. Structural and spectroscopic characterization shows that the sample retains a nanosheet-based architecture with a rougher, partially aggregated surface, and that cobalt is present as mixed-valence Co2+/Co3+ species decorated on the NiFe-LDH surface rather than as a separate crystalline phase. In a glycerol-containing alkaline electrolyte, the Co/NiFe-LDH@NF anode reaches 10 mA cm−2 at 1.271 V vs. RHE in a single measurement, which is 383 mV lower than the potential required by the oxygen evolution reaction (1.654 V vs. RHE) on the same electrode. In two separate chronoamperometric runs, glycerol-assisted water electrolysis produced formate at 0.234 mmol cm−2 h−1 with a Faradaic efficiency of ca. 97% and hydrogen at 32.47 mL cm−2 h−1 with a Faradaic efficiency of ca. 98%. During a 10 h stability test, the catalyst retained approximately 81% of its initial current in a single measurement; we report this as a moderate but measurable decay rather than as a demonstration of long-term durability. This study demonstrates a feasible strategy for designing integrated electrocatalytic systems that co-produce green hydrogen and valuable chemicals using earth-abundant materials, thereby improving both the energy efficiency and economic attractiveness of hydrogen production.
SN  - 2073-4344
ER  -