Solid-State Synthesis of NMC111 and Impact of Impurities on the Electrochemical Performance
- 1Univ. Grenoble Alpes, Univ. Savoie Mont Blanc , , ,
Abstract
The growing deployment of electric vehicles will soon generate large quantities of end-of-life Li-ion batteries, making the recovery of Ni–Mn–Co (NMC) cathode active materials critical. Recycling processes often yield individual metal salts that can be directly recombined into NMC through solid-state synthesis, a simple, water-free alternative to coprecipitation. However, recycled precursors may contain residual impurities whose impact on solid-state NMC synthesis remains poorly understood, notably in terms of electrochemical performance. Therefore, investigating the influence of controlled amounts of CuO and/or Na2SO4 (typical residues from battery wastes and hydrometallurgical steps) on the morphology, structure, and electrochemical performance of NMC111 synthesized from carbonate precursors is needed. We report that both impurities reduce particle size and increase the lattice parameters, indicating their partial incorporation into the oxide structure. Cu-containing samples exhibit Cu-rich inclusions, while Na2SO4 induces strong chemical heterogeneity within particles. These impurity-driven microstructural changes enhance high-rate capability but deteriorate cycling stability. Na2SO4-containing materials in particular show rapid capacity fading, whereas low CuO levels (1–2 wt %) maintain chemical homogeneity and deliver aging performances comparable to pristine NMC. This study demonstrates that impurities introduced during solid-state synthesis can hinder particle growth and chemical homogenization, thereby governing the performance of recycled NMC materials.
Related
- Time-optimized ultrasonic synthesis of α-MnO2 nanoflower: controlling structural evolution and agglomeration for stable electrochemical performance
- Impact of electrochemical overoxidation on the performance metrics of PEDOT films: experimental and theoretical studies
- Balancing Structural Ordering and Electrochemical Performance in LiNi0.94Co0.06O2 Cathodes via PVA-Assisted Synthesis
- Tailoring Upsalite-derived Ni-MgO catalysts: Impact of synthesis method on CO2 methanation performance
- Asymmetric synthesis of azabicyclo[2.1.1]hexanes via electrochemical haloamination of methylenecyclobutanes
BibTeX
@article{coron2026solidstate,
title = {{Solid-State Synthesis of NMC111 and Impact of Impurities on the Electrochemical Performance}},
author = {Eddy Coron and Didier Devaux and Jean-Claude Lepretre and Lenka Svecova},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c02237},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c02237/5454159/Solid-State-Synthesis-of-NMC111-and-Impact-of},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - Solid-State Synthesis of NMC111 and Impact of Impurities on the Electrochemical Performance
AU - Eddy Coron
AU - Didier Devaux
AU - Jean-Claude Lepretre
AU - Lenka Svecova
PY - 2026
DA - 2026/10/20
JO - ACS Omega
DO - 10.1021/acsomega.6c02237
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c02237/5454159/Solid-State-Synthesis-of-NMC111-and-Impact-of
AB - The growing deployment of electric vehicles will soon generate large quantities of end-of-life Li-ion batteries, making the recovery of Ni–Mn–Co (NMC) cathode active materials critical. Recycling processes often yield individual metal salts that can be directly recombined into NMC through solid-state synthesis, a simple, water-free alternative to coprecipitation. However, recycled precursors may contain residual impurities whose impact on solid-state NMC synthesis remains poorly understood, notably in terms of electrochemical performance. Therefore, investigating the influence of controlled amounts of CuO and/or Na2SO4 (typical residues from battery wastes and hydrometallurgical steps) on the morphology, structure, and electrochemical performance of NMC111 synthesized from carbonate precursors is needed. We report that both impurities reduce particle size and increase the lattice parameters, indicating their partial incorporation into the oxide structure. Cu-containing samples exhibit Cu-rich inclusions, while Na2SO4 induces strong chemical heterogeneity within particles. These impurity-driven microstructural changes enhance high-rate capability but deteriorate cycling stability. Na2SO4-containing materials in particular show rapid capacity fading, whereas low CuO levels (1–2 wt %) maintain chemical homogeneity and deliver aging performances comparable to pristine NMC. This study demonstrates that impurities introduced during solid-state synthesis can hinder particle growth and chemical homogenization, thereby governing the performance of recycled NMC materials.
SN - 2470-1343
ER -