Tailoring Alfalfa-Derived Biochar via Pyrolysis Temperature for Enhanced Adsorption of Diverse Per- and Polyfluoroalkyl Substances in Water
5 affiliations
- 1Texas A&M AgriLife Research and Extension Center , , ,
- 2Yonsei University , Seodaemun-gu, ,
- 3Korea Institute of Energy Research , , ,
- 4Korea Institute of Energy Research (KIER) , , 200 Haemajihaean-ro , Gujwa-eup, , ,
- 5Texas A&M University , , , ,
Abstract
This study investigated the removal of long- and short-chain per- and polyfluoroalkyl substances (PFAS) such as perfluorooctanoic acid (PFOA) and perfluorobutanoic acid (PFBA) using alfalfa-derived biochar produced at different pyrolysis temperatures (300–900 °C). Increasing pyrolysis temperature substantially altered the physicochemical properties of the biochars, resulting in higher surface area, higher fixed carbon content, lower O/C and H/C ratios, and more condensed carbon structures. Among the tested materials, the biochar produced at 900 °C (AF900) showed the highest adsorption performance for both PFOA (0.39417 mg/g BC) and PFBA (0.0972 mg/g BC). Adsorption was strongly pH-dependent, with the highest removal observed at pH 3.0, and PFOA consistently showed much greater adsorption than PFBA. Possible mechanisms may include electrostatic, hydrophobic, and π–π interactions. The batch adsorption studies indicated that PFOA was better fitted to the pseudo-second-order and Freundlich models, and PFBA to the Elovich and Temkin models, while the adsorption of PFOA and PFBA followed endothermic reactions. The reusability experiment for AF900 showed a gradual decrease in regeneration efficiency over three cycles for PFOA and PFBA, with a relatively higher decrease for PFBA. Adsorption of PFOA and PFBA on AF900 in groundwater was lower than that in DI water, although increasing the loading rate of AF900 substantially improved PFAS removal in groundwater. Overall, AF900 was the best-performing material for adsorption of PFOA and PFBA among the alfalfa-derived biochars prepared at various temperatures in this study, whereas its removal performance in groundwater needs to be further studied.
Related
- Online Soil Column Chromatography Coupled with Mass Spectrometry for Studying Sorption of Per- and Polyfluoroalkyl Substances and Other Organic Contaminants
- Predicting Bioconcentration Factors and Concentrations of Per- and Polyfluoroalkyl Substances in Plants with Machine Learning.
- Spray pyrolysis derived Ce-doped SnO2 nanoparticles-based thin films: Tailoring band gap and conductivity for energy and optoelectronic applications
- Structure-related differences in plasma protein binding of per- and polyfluoroalkyl substances in mice and humans
- MOF-mediated cascade photoreactions under nanoconfinement for defluorination of per- and polyfluoroalkyl substances
BibTeX
@article{kim2026tailoring,
title = {{Tailoring Alfalfa-Derived Biochar via Pyrolysis Temperature for Enhanced Adsorption of Diverse Per- and Polyfluoroalkyl Substances in Water}},
author = {Gi-Beom Kim and Soo Youn Lee and Sahng Hyuck Woo and Ying-Ren Lai and Eunsung Kan},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c06097},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c06097/5456445/Tailoring-Alfalfa-Derived-Biochar-via-Pyrolysis},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Tailoring Alfalfa-Derived Biochar via Pyrolysis Temperature for Enhanced Adsorption of Diverse Per- and Polyfluoroalkyl Substances in Water
AU - Gi-Beom Kim
AU - Soo Youn Lee
AU - Sahng Hyuck Woo
AU - Ying-Ren Lai
AU - Eunsung Kan
PY - 2026
DA - 2026/10/01
JO - ACS Omega
DO - 10.1021/acsomega.6c06097
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c06097/5456445/Tailoring-Alfalfa-Derived-Biochar-via-Pyrolysis
AB - This study investigated the removal of long- and short-chain per- and polyfluoroalkyl substances (PFAS) such as perfluorooctanoic acid (PFOA) and perfluorobutanoic acid (PFBA) using alfalfa-derived biochar produced at different pyrolysis temperatures (300–900 °C). Increasing pyrolysis temperature substantially altered the physicochemical properties of the biochars, resulting in higher surface area, higher fixed carbon content, lower O/C and H/C ratios, and more condensed carbon structures. Among the tested materials, the biochar produced at 900 °C (AF900) showed the highest adsorption performance for both PFOA (0.39417 mg/g BC) and PFBA (0.0972 mg/g BC). Adsorption was strongly pH-dependent, with the highest removal observed at pH 3.0, and PFOA consistently showed much greater adsorption than PFBA. Possible mechanisms may include electrostatic, hydrophobic, and π–π interactions. The batch adsorption studies indicated that PFOA was better fitted to the pseudo-second-order and Freundlich models, and PFBA to the Elovich and Temkin models, while the adsorption of PFOA and PFBA followed endothermic reactions. The reusability experiment for AF900 showed a gradual decrease in regeneration efficiency over three cycles for PFOA and PFBA, with a relatively higher decrease for PFBA. Adsorption of PFOA and PFBA on AF900 in groundwater was lower than that in DI water, although increasing the loading rate of AF900 substantially improved PFAS removal in groundwater. Overall, AF900 was the best-performing material for adsorption of PFOA and PFBA among the alfalfa-derived biochars prepared at various temperatures in this study, whereas its removal performance in groundwater needs to be further studied.
SN - 2470-1343
ER -