One‐Pot Synthesis of Aqueous PEDOT‐Based Conductive Inks via Sequential RAFT/Oxidative Polymerization
Abstract
The rising demand for flexible and printable electronics has driven significant interest in π‐conjugated polymers, in particular for poly(3,4‐ethylenedioxythiophene) (PEDOT), which is traditionally stabilized by poly(styrenesulfonate) (PSS). In the recent years, our group has been investigating poly[4‐styrenesulfonyl(trifluoromethylsulfonyl)imide] (PSTFSI) as a promising alternative polyelectrolyte, yielding PEDOT:PSTFSI dispersions with enhanced ionic conductivity, reduced acidity, and lower hygroscopicity. Although this polymer complex offers great potential in organic electronics, its synthesis still requires long reactions times (up to several days) and the use of toxic organic solvents with tedious intermediate purification steps, limiting its scalability and sustainability. Herein, we report an innovative aqueous one‐pot synthesis of PEDOT:PSTFSI dispersion, by combining reversible addition–fragmentation chain‐transfer (RAFT) and oxidative polymerization in an aqueous one‐pot process. This approach eliminates the need for harmful solvents and intermediate purifications, achieving full monomer conversion in less than 4 h and excellent control over macromolecular structure of PSTFSI (30–300 kg mol −1 with Đ often below 1.1). Following the one‐pot oxidative polymerization, the resulting PEDOT:PSTFSI dispersions exhibit filamentous network morphologies, forming highly percolated conductive films upon printing, with charge conductivities up to 120 S cm −1 .
Related
- Electrospinning Versus Chemical Polymerization for Conductive Polymer Fibers: Reproducibility, Electrical Performance and Wearable Sensing
- Effect of a Fiber Raw Material Structure on the Properties of Cellulose/Polyacrylamide Double-Network Antifreezing Conductive Hydrogels Prepared in an AlCl₃/ZnCl₂ Aqueous System.
- Accessing block copolymers with independently modulated tacticities using sequential cationic-anionic polymerization of vinyl ethers and thiiranes.
- Synthesis of PEDOT particles and manufacturing of electrically-conductive PEO / PEDOT thermoplastic composites by twin-screw extrusion
- Direct Synthesis of CdSe Quantum Dot Inks in Polar Solvents with Conductive Ligands
BibTeX
@article{negny2026onepot,
title = {{One‐Pot Synthesis of Aqueous PEDOT‐Based Conductive Inks via Sequential RAFT/Oxidative Polymerization}},
author = {Fantine Negny and Melanie Bousquet and Benjamin Cabannes-Boué and Pierre‐yves Dugas and Lionel Hirsch and Thiago R Guimaraes and Eric Cloutet},
journal = {Angewandte Chemie International Edition},
year = {2026},
month = sep,
doi = {10.1002/anie.8256057},
url = {https://hal.science/hal-05746349v1},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - JOUR
TI - One‐Pot Synthesis of Aqueous PEDOT‐Based Conductive Inks via Sequential RAFT/Oxidative Polymerization
AU - Fantine Negny
AU - Melanie Bousquet
AU - Benjamin Cabannes-Boué
AU - Pierre‐yves Dugas
AU - Lionel Hirsch
AU - Thiago R Guimaraes
AU - Eric Cloutet
PY - 2026
DA - 2026/09/08
JO - Angewandte Chemie International Edition
DO - 10.1002/anie.8256057
UR - https://hal.science/hal-05746349v1
AB - The rising demand for flexible and printable electronics has driven significant interest in π‐conjugated polymers, in particular for poly(3,4‐ethylenedioxythiophene) (PEDOT), which is traditionally stabilized by poly(styrenesulfonate) (PSS). In the recent years, our group has been investigating poly[4‐styrenesulfonyl(trifluoromethylsulfonyl)imide] (PSTFSI) as a promising alternative polyelectrolyte, yielding PEDOT:PSTFSI dispersions with enhanced ionic conductivity, reduced acidity, and lower hygroscopicity. Although this polymer complex offers great potential in organic electronics, its synthesis still requires long reactions times (up to several days) and the use of toxic organic solvents with tedious intermediate purification steps, limiting its scalability and sustainability. Herein, we report an innovative aqueous one‐pot synthesis of PEDOT:PSTFSI dispersion, by combining reversible addition–fragmentation chain‐transfer (RAFT) and oxidative polymerization in an aqueous one‐pot process. This approach eliminates the need for harmful solvents and intermediate purifications, achieving full monomer conversion in less than 4 h and excellent control over macromolecular structure of PSTFSI (30–300 kg mol −1 with Đ often below 1.1). Following the one‐pot oxidative polymerization, the resulting PEDOT:PSTFSI dispersions exhibit filamentous network morphologies, forming highly percolated conductive films upon printing, with charge conductivities up to 120 S cm −1 .
SN - 1433-7851
SN - 1521-3773
ER -