Frequency-Dependent Breakdown of Litz-Wire Insulation Under Repetitive Bipolar Square-Wave Voltages
Abstract
This paper investigates the dielectric breakdown behavior of Litz wire insulation subjected to repetitive fast-edge bipolar square-wave voltages representative of wide-bandgap (WBG) power converter stress. Two conductor sizes, 14 AWG and 16 AWG, were tested in a twisted-pair configuration over frequencies ranging from 1 kHz to 30 kHz using a controlled high-voltage pulse generator with 200 ns rise time. The breakdown voltages obtained at each frequency were statistically analyzed using the weighted two-parameter Weibull method in accordance with IEEE Std 930-2004. Between 1 and 30 kHz, the mean breakdown voltage decreases by approximately 10.7% for the 14 AWG construction and 20.0% for the 16 AWG construction. The 14 AWG specimens exhibit a modest increase between 1 and 5 kHz followed by a decline, whereas the 16 AWG mean decreases across the tested frequencies. The Weibull shape parameter varies nonmonotonically with frequency, characterizing differences in the dispersion of the measured breakdown voltages. These findings provide construction-specific breakdown data relevant to Litz-wire insulation assessment in high-frequency power electronic applications. Possible contributions from charge accumulation, localized discharge activity, and dielectric heating are discussed, but were not directly verified in this study.
Related
- Complex frequency-dependent quadrature squeezing in semiconductor lasers
- Internal friction and frequency-dependent conductivity in the bivariate site energy model for the mixed alkali effect in glasses
- Frequency- and Power-Dependent Optical Response of a Cesium Rydberg Microwave Receiver
- Black Holes as Frequency-Dependent Filters of Stochastic Gravitational Waves
- Chameleon Gravity with an Environmental Frequency Dependent on Density
BibTeX
@misc{rahman2026frequencydependent,
title = {{Frequency-Dependent Breakdown of Litz-Wire Insulation Under Repetitive Bipolar Square-Wave Voltages}},
author = {Md Asifur Rahman and Farzana Islam and Mona Ghassemi},
howpublished = {arXiv},
year = {2026},
month = oct,
doi = {10.48550/arxiv.2610.07012},
eprint = {2610.07012},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2610.07012},
note = {CC BY-NC-ND 4.0},
}
RIS
TY - UNPB
TI - Frequency-Dependent Breakdown of Litz-Wire Insulation Under Repetitive Bipolar Square-Wave Voltages
AU - Md Asifur Rahman
AU - Farzana Islam
AU - Mona Ghassemi
PY - 2026
DA - 2026/10/04
PB - arXiv
DO - 10.48550/arxiv.2610.07012
UR - https://arxiv.org/abs/2610.07012
AB - This paper investigates the dielectric breakdown behavior of Litz wire insulation subjected to repetitive fast-edge bipolar square-wave voltages representative of wide-bandgap (WBG) power converter stress. Two conductor sizes, 14 AWG and 16 AWG, were tested in a twisted-pair configuration over frequencies ranging from 1 kHz to 30 kHz using a controlled high-voltage pulse generator with 200 ns rise time. The breakdown voltages obtained at each frequency were statistically analyzed using the weighted two-parameter Weibull method in accordance with IEEE Std 930-2004. Between 1 and 30 kHz, the mean breakdown voltage decreases by approximately 10.7% for the 14 AWG construction and 20.0% for the 16 AWG construction. The 14 AWG specimens exhibit a modest increase between 1 and 5 kHz followed by a decline, whereas the 16 AWG mean decreases across the tested frequencies. The Weibull shape parameter varies nonmonotonically with frequency, characterizing differences in the dispersion of the measured breakdown voltages. These findings provide construction-specific breakdown data relevant to Litz-wire insulation assessment in high-frequency power electronic applications. Possible contributions from charge accumulation, localized discharge activity, and dielectric heating are discussed, but were not directly verified in this study.
ER -