Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 39 min ago
Peer-reviewedCC BY 4.0Molecules

Synergistic Al-MIL-53-(Mn) Bimetallic Metal–Organic Frameworks: Rational Tuning of Mn/Al Composition for Enhanced CO2 Capture

  1. 1Department of Chemical Engineering, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg 2028, South Africa
  2. 2Department of Mathematics and Applied Mathematics, Faculty of Science, University of Johannesburg, Johannesburg 2028, South Africa

Abstract

The development of bimetallic metal–organic frameworks (BMOFs) represents a promising strategy to meet critical requirements of CO2 capture in flue gas, where CO2 exists at low partial pressure (0.15 bar, 298–333 K) due to the synergistic effects of mixed-metal incorporation that can enhance stability and CO2 affinity. In this study, aluminum and manganese were coordinated on terephthalic acid to produce a series of bimetallic Al-MIL-53-(Mn) with varying Mn/Al molar ratios. These samples were synthesized via a hydrothermal approach, followed by a two-step activation, and characterized using FTIR, PXRD, SEM-EDX, TGA, and the BET method to uncover fundamental CO2 adsorption characteristics. All samples exhibited MIL-53 features, including a predominant microporous structure, the presence of hydroxyl bridging groups in the surface chemistry, a rhomboidal morphology that supports their breathing behavior, and high thermal stability. The textural properties and the crystallinity were enhanced with increased mixed-metal ratios (Mn/Al = 0.15, 0.45, 0.65), and the findings revealed structural destabilization at a high molar ratio (Mn/Al = 0.85). Besides the 77 K low-pressure N2 isotherms, CO2 isotherms measured at a screening temperature of 273 K demonstrated a maximum uptake of 3.03 mmol/g, which compares favorably with the 2.19–2.85 mmol/g reported in the literature for pristine MIL-53(Al). They revealed a consistent Type I Langmuir isotherm with a steep uptake at low partial pressure, which suggests the presence of strong preferential binding sites for CO2 on the surface of bimetallic MOFs. As this is a screening study, the bulk Mn content (ICP-OES), the CO2/N2 selectivity derived from 273 K and 298 K isotherms, the performance at flue-gas temperatures (313–333 K) and moisture tolerance remain to be established.

Related

  1. Bimetallic NiCo nanoparticles confined in metal-organic frameworks: Co accelerates reduction and enhances low-temperature CO₂ methanation
    Hongmei Chen, Plaifa Hongmanorom, Lionel Zoubritzky +11
    Applied Catalysis B: EnvironmentalPeer-reviewedCC BY 4.0Full textCatalysisHAL
  2. Design Rules for Bimetallic and Multimetallic Nanocatalysts Harnessing Synergistic Effects for Alkaline Hydrogen Oxidation.
    Yun-Shan Tsai, Shang-Cheng Lin, Cheng-Yu Wu +1
    ACS nanoscience AuPeer-reviewedCC BYFull text1 citedElectrochemistry & energyEurope PMC
  3. Bimetallic metal–organic frameworks for advanced biosensing and biomedical applications: structure–property relationships, therapeutic mechanisms, and translational challenges
    Swera Talib, Zia Ul Haq Khan, Fida Ullah +1
    RSC AdvancesPeer-reviewedCC BY-NC 3.0Full textInorganic & organometallic chemistryPMCEurope PMC
  4. Synergistic Tuning of Diffusion Enables Surface-Passivation-Directed Electrodeposition of Shaped Bimetallic Nanoparticles
    Gabriel C. Halford, Abigail M. Sublett, Adam J. Buratowski +3
    ACS NanoPeer-reviewedCC BY 4.0Full textMaterials & polymersPMC
  5. Synergistic Pore Microenvironment Engineering in Zinc Metal–Organic Frameworks for High SF 6 /N 2 Selectivity and Humidity‐Resistant Trace SF 6 Capture
    Li Xu, Li‐Ping Zhang, Y F Li +1
    Angewandte Chemie International EditionPeer-reviewedLicence not statedFull text5 citedInorganic & organometallic chemistryOpenAlex
BibTeX
@article{djemima2026synergistic,
  title = {{Synergistic Al-MIL-53-(Mn) Bimetallic Metal–Organic Frameworks: Rational Tuning of Mn/Al Composition for Enhanced CO2 Capture}},
  author = {Bulanga Djemima and Thulane Paepae and Oluwatayo Racheal Onisuru and Major Melusi Mabuza},
  journal = {Molecules},
  year = {2026},
  month = nov,
  doi = {10.3390/molecules31224087},
  url = {https://www.mdpi.com/1420-3049/31/22/4087},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Synergistic Al-MIL-53-(Mn) Bimetallic Metal–Organic Frameworks: Rational Tuning of Mn/Al Composition for Enhanced CO2 Capture
AU  - Bulanga Djemima
AU  - Thulane Paepae
AU  - Oluwatayo Racheal Onisuru
AU  - Major Melusi Mabuza
PY  - 2026
DA  - 2026/11/12
JO  - Molecules
DO  - 10.3390/molecules31224087
UR  - https://www.mdpi.com/1420-3049/31/22/4087
AB  - The development of bimetallic metal–organic frameworks (BMOFs) represents a promising strategy to meet critical requirements of CO2 capture in flue gas, where CO2 exists at low partial pressure (0.15 bar, 298–333 K) due to the synergistic effects of mixed-metal incorporation that can enhance stability and CO2 affinity. In this study, aluminum and manganese were coordinated on terephthalic acid to produce a series of bimetallic Al-MIL-53-(Mn) with varying Mn/Al molar ratios. These samples were synthesized via a hydrothermal approach, followed by a two-step activation, and characterized using FTIR, PXRD, SEM-EDX, TGA, and the BET method to uncover fundamental CO2 adsorption characteristics. All samples exhibited MIL-53 features, including a predominant microporous structure, the presence of hydroxyl bridging groups in the surface chemistry, a rhomboidal morphology that supports their breathing behavior, and high thermal stability. The textural properties and the crystallinity were enhanced with increased mixed-metal ratios (Mn/Al = 0.15, 0.45, 0.65), and the findings revealed structural destabilization at a high molar ratio (Mn/Al = 0.85). Besides the 77 K low-pressure N2 isotherms, CO2 isotherms measured at a screening temperature of 273 K demonstrated a maximum uptake of 3.03 mmol/g, which compares favorably with the 2.19–2.85 mmol/g reported in the literature for pristine MIL-53(Al). They revealed a consistent Type I Langmuir isotherm with a steep uptake at low partial pressure, which suggests the presence of strong preferential binding sites for CO2 on the surface of bimetallic MOFs. As this is a screening study, the bulk Mn content (ICP-OES), the CO2/N2 selectivity derived from 273 K and 298 K isotherms, the performance at flue-gas temperatures (313–333 K) and moisture tolerance remain to be established.
SN  - 1420-3049
ER  -