Electrospun PVA/pectin nanofibers encapsulating both emulsion and nanoemulsion of Perovskia abrotanoides oil show nanoemulsion superiority for sustainable active packaging applications
- 1Department of Food Hygiene and Aquaculture, Faculty of Veterinary Medicine, Ferdowsi University of Mashhad
- 2Department of Pharmaceutical Biotechnology, School of Pharmacy, Mashhad University of Medical Sciences
- 3Laboratory of Materials Science and Nanotechnology (LMNT). INSTM, University of Sassari
Abstract
Sustainable packaging plays a critical role in addressing the severe environmental pollution caused by synthetic polymers. In this study, pectin-incorporated polyvinyl alcohol (PVA) nanofibers containing Perovskia abrotanoides essential oil (EO) and its nanoemulsion form (NEO) were successfully optimized and fabricated using electrospinning. Physicochemical properties were characterized using SEM, FTIR, DSC, XRD, and zeta potential analysis. Optimal electrospinning parameters were achieved with 8% PVA and 2% pectin (80:20), a feed rate of 1 mL/h, and an applied voltage of 18.0 kV, yielding uniform, bead-free nanofibers. EO and NEO were incorporated at concentrations of 0.5 MIC, 1 MIC, and 2 MIC to assess their antioxidant and antibacterial performance. SEM analysis revealed that 2 MIC EO and 0.5 MIC NEO produced smoother nanofibers with mean diameters of 898 ± 240 nm and 755 ± 148 nm, respectively, along with enhanced antibacterial efficacy against seven foodborne pathogens. Compared with EO-loaded systems, NEO-loaded nanofibers exhibited higher absolute zeta potential values ( −5.9 mV for 2NEO) and superior stability mechanical properties. Overall, this study suggests that PVA/pectin nanofibers containing Perovskia abrotanoides NEO are promising sustainable multifunctional packaging material.
Related
- Development and Characterization of a Zanthoxylum limonella Essential Oil Nanoemulsion for Oral Care Applications
- Fabrication, Structural Characterization, and In Vitro Release Kinetics of Electrospun PVA Nanofiber Patches Encapsulating a Polyherbal Extract Mixture for Oral Mucosal Applications
- Beeswax Nanoemulsion for Consolidation and Hydrophobization of Canvases
- Optimization and fractional characterization of exopolysaccharides produced by Leuconostoc mesenteroides subsp. jonggajibkimchii obtained from Kanji and their utilization in vitamin D nanoemulsion-fortified yogurt as stabilizers
- Mechanisms of Water-Lock Removal by a Nanoemulsion/Mud Acid Composite System in Low-Permeability Sandstone Reservoirs: Insights from Pore-Scale Characterization in the MB Block
BibTeX
@article{tabibian2026electrospun,
title = {{Electrospun PVA/pectin nanofibers encapsulating both emulsion and nanoemulsion of Perovskia abrotanoides oil show nanoemulsion superiority for sustainable active packaging applications}},
author = {Samaneh Tabibian and Maryam Hashemi and Plinio Innocenzi and Mohammad Mohsenzadeh},
journal = {Scientific Reports},
year = {2026},
month = jul,
doi = {10.1038/s41598-026-62130-0},
url = {https://doi.org/10.1038/s41598-026-62130-0},
note = {CC BY},
}
RIS
TY - JOUR
TI - Electrospun PVA/pectin nanofibers encapsulating both emulsion and nanoemulsion of Perovskia abrotanoides oil show nanoemulsion superiority for sustainable active packaging applications
AU - Samaneh Tabibian
AU - Maryam Hashemi
AU - Plinio Innocenzi
AU - Mohammad Mohsenzadeh
PY - 2026
DA - 2026/07/01
JO - Scientific Reports
DO - 10.1038/s41598-026-62130-0
UR - https://doi.org/10.1038/s41598-026-62130-0
AB - Sustainable packaging plays a critical role in addressing the severe environmental pollution caused by synthetic polymers. In this study, pectin-incorporated polyvinyl alcohol (PVA) nanofibers containing Perovskia abrotanoides essential oil (EO) and its nanoemulsion form (NEO) were successfully optimized and fabricated using electrospinning. Physicochemical properties were characterized using SEM, FTIR, DSC, XRD, and zeta potential analysis. Optimal electrospinning parameters were achieved with 8% PVA and 2% pectin (80:20), a feed rate of 1 mL/h, and an applied voltage of 18.0 kV, yielding uniform, bead-free nanofibers. EO and NEO were incorporated at concentrations of 0.5 MIC, 1 MIC, and 2 MIC to assess their antioxidant and antibacterial performance. SEM analysis revealed that 2 MIC EO and 0.5 MIC NEO produced smoother nanofibers with mean diameters of 898 ± 240 nm and 755 ± 148 nm, respectively, along with enhanced antibacterial efficacy against seven foodborne pathogens. Compared with EO-loaded systems, NEO-loaded nanofibers exhibited higher absolute zeta potential values ( −5.9 mV for 2NEO) and superior stability mechanical properties. Overall, this study suggests that PVA/pectin nanofibers containing Perovskia abrotanoides NEO are promising sustainable multifunctional packaging material.
SN - 2045-2322
ER -