Comparison of One-Pot Synthesis and Incipient Wetness Impregnation for Nb-Mn/MCM-41 Catalysts in Plasma-Catalytic Oxidation of Toluene
- 1School of Environment and Ecology, Jiangsu Open University, 832 Yingtian Street, Nanjing 210019, China
- 2School of Water Conservancy and Environment, University of Jinan, Jinan 250022, China
- 3School of the Environment, Nanjing University, 163 Xianlin Avenue, Nanjing 210023, China
Abstract
Niobium-manganese co-loaded MCM-41 catalysts were synthesized via one-pot synthesis (Nb-Mn/MI) and incipient wetness impregnation (Nb-Mn/MII) for the plasma-catalytic degradation of toluene. BET, XRD, TEM, XPS, and O2-TPD results showed that increasing metal loading decreased surface area, pore volume, and both the Mn4+/(Mn2++Mn3+) ratio and Olat/Oads ratio across all samples. At 600 J/L, 3%Nb-Mn/MII gave the highest toluene removal efficiency of 96.5%, CO2 selectivity of 55.0%, and carbon balance of 85.4%. Voltage-current measurements indicated nearly identical discharge characteristics for both synthesis routes. These observations suggest that the performance differences may be related to the distinct dispersion states and redox properties of the catalysts rather than to plasma modification. The impregnated samples appeared to benefit from highly dispersed surface nanoparticles at lower metal loading (3%Nb-Mn/MII), whereas the one-pot samples seemed to retain relatively better structural integrity at higher metal loading (7%Nb-Mn/MI), presumably due to stronger metal-support interactions. This work highlights the potential of tailoring synthesis strategy to metal loading for improved plasma-catalytic VOC abatement.
Related
- A Novel Reactive Incipient Wetness Impregnation Assisted by H ₂ O ₂ for Vanadium Catalysts: the Case of V/Silicalite-1 zeolites in Oxidative Propane Dehydrogenation
- Adaptive Catalytic Synthesis of Aromatic and Aliphatic Amines via CO2-Induced Feedback Inhibition Using Standard Hydrogenation Catalysts.
- Acid Sites, Pore Architecture and Catalytic Function in Commercial Clay Catalysts
- In-Situ Catalytic Pyrolysis of Polystyrene with Sewage Sludge-Derived Catalysts: Sewage Sludge Ash, Sewage Sludge Char, and Fe-Impregnated Acid-Leached Sewage Sludge Char
- Effect of Silica on Nitrate-Incorporated Vanadia Catalysts in Low-Temperature Selective Catalytic Reduction of Nitrogen Oxides.
BibTeX
@article{yao2026comparison,
title = {{Comparison of One-Pot Synthesis and Incipient Wetness Impregnation for Nb-Mn/MCM-41 Catalysts in Plasma-Catalytic Oxidation of Toluene}},
author = {Xiaohong Yao and Jian Zhang and Chao Long and Chencheng Sun},
journal = {Catalysts},
year = {2026},
month = oct,
doi = {10.3390/catal16110947},
url = {https://www.mdpi.com/2073-4344/16/11/947},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Comparison of One-Pot Synthesis and Incipient Wetness Impregnation for Nb-Mn/MCM-41 Catalysts in Plasma-Catalytic Oxidation of Toluene
AU - Xiaohong Yao
AU - Jian Zhang
AU - Chao Long
AU - Chencheng Sun
PY - 2026
DA - 2026/10/24
JO - Catalysts
DO - 10.3390/catal16110947
UR - https://www.mdpi.com/2073-4344/16/11/947
AB - Niobium-manganese co-loaded MCM-41 catalysts were synthesized via one-pot synthesis (Nb-Mn/MI) and incipient wetness impregnation (Nb-Mn/MII) for the plasma-catalytic degradation of toluene. BET, XRD, TEM, XPS, and O2-TPD results showed that increasing metal loading decreased surface area, pore volume, and both the Mn4+/(Mn2++Mn3+) ratio and Olat/Oads ratio across all samples. At 600 J/L, 3%Nb-Mn/MII gave the highest toluene removal efficiency of 96.5%, CO2 selectivity of 55.0%, and carbon balance of 85.4%. Voltage-current measurements indicated nearly identical discharge characteristics for both synthesis routes. These observations suggest that the performance differences may be related to the distinct dispersion states and redox properties of the catalysts rather than to plasma modification. The impregnated samples appeared to benefit from highly dispersed surface nanoparticles at lower metal loading (3%Nb-Mn/MII), whereas the one-pot samples seemed to retain relatively better structural integrity at higher metal loading (7%Nb-Mn/MI), presumably due to stronger metal-support interactions. This work highlights the potential of tailoring synthesis strategy to metal loading for improved plasma-catalytic VOC abatement.
SN - 2073-4344
ER -