Skip to content
DraconiticResearch
Search Sources API
226,742 studies31 sourcesUpdated 48 min ago
Peer-reviewedCC BY 4.0Batteries

Data-Driven Aging Modeling of a Light Electric Vehicle Battery Based on Synthetic Load Cycles and Physics-Based Aging Simulations

  1. 1Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10000 Zagreb, Croatia
  2. 2Rimac Energy d.o.o., Buzinski krči 3, 10000 Zagreb, Croatia

Abstract

Aging of lithium-ion batteries is one of the key features addressed through battery design and management, since it corresponds to continuous decrease in battery energy and power densities. Predicting battery aging during its exploitation in a vehicle by means of detailed, physics-based modeling is challenging due to mathematical and computational complexity, which makes data-driven methods attractive. However, the outputs of data-driven models, such as the capacity change, are hard to measure after every load cycle. This paper, therefore, proposes a data-driven modeling methodology that combines the physics-based and data-driven approaches. A limited amount of recorded field data of a light electric vehicle (a 3.5 kW electric scooter) is used for generating a large amount of synthetic load cycles, which are then inputted to a physical aging simulation model implemented within the GT-AutoLion environment (21 aging simulations with 41,347 load cycles in total). With this approach, the capacity change after every load cycle can be calculated and used as the output of linear regression and alternative neural network models, whose inputs are relevant load cycle features systematically selected from a rich set of feature candidates. The model covers two key aging processes, growth of the solid electrolyte interphase and lithium plating on a graphite anode, the latter employing a neural network-based classifier of plating activation. The data-driven models are surrogates of the physics-based reference model, meaning that the reported errors express their agreement with the reference simulation, and not with the measured capacity fade. On four held-out test simulations, which recombine the recorded micro-cycles of the training simulations but were not used for model identification or selection, the linear regression model of the capacity loss due to interphase growth reaches a per-cycle coefficient of determination of 0.85 and a cumulative error of at most 0.20% of the nominal capacity. The cumulative capacity loss of the complete model deviates from the reference by at most 0.36% of the nominal capacity on the test simulations, partly owing to compensating errors of the lithium-plating sub-models, 0.33% on a simulation driven by the recorded load data of the same scooter, and 1.34% on the validation simulations.

Related

  1. Normal-Data-Only Fault Detection and Faulty-Cell Localization in Heterogeneous Electric-Vehicle Battery Packs Using a Hotspot-Suppressed and Alarm-Consistent Dual-Branch Attention Transformer
    Xun Wang, Xinwei Fan
    BatteriesPeer-reviewedCC BY 4.0Electrochemistry & energyCrossref
  2. Real Electric Vehicle Lithium-Ion Battery Capacity Estimation Method Based on the Fusion Model of Discrete Arrhenius and Double Extended Kalman Filter
    Dongdong Qiao, Zhicheng Zhu, Xiaowei Shen +3
    BatteriesPeer-reviewedCC BY 4.0Electrochemistry & energyCrossref
  3. AI-Enabled Battery Storage and Electric Vehicle Flexibility for Power-Quality-Constrained Photovoltaic Integration: A Critical Review
    Amr S. Zalhaf, Hongzhi Jiang, Yang Han +4
    BatteriesPeer-reviewedCC BY 4.0Electrochemistry & energyCrossref
  4. Machine Learning-Based Electric Vehicle Remaining Range Prediction: Assessing the Relative Impact of Battery Status, Driving Context, and Environmental Conditions
    Abdulkadir Atalan, Yasemin Ayaz Atalan
    BatteriesPeer-reviewedCC BY 4.0Electrochemistry & energyCrossref
  5. Harnessing polymeric materials for applications in electric vehicle with sustainability contributions and prospects
    L. Rajeshkumar, M. Ramesh, J. Arulmozhivarman +2
    iSciencePeer-reviewedCC BY-NC 4.0Full textMaterials & polymersCell PressCrossrefEurope PMC
BibTeX
@article{maletic2026datadriven,
  title = {{Data-Driven Aging Modeling of a Light Electric Vehicle Battery Based on Synthetic Load Cycles and Physics-Based Aging Simulations}},
  author = {Filip Maletić and Mario Hrgetić and Joško Deur},
  journal = {Batteries},
  year = {2026},
  month = nov,
  doi = {10.3390/batteries12110478},
  url = {https://www.mdpi.com/2313-0105/12/11/478},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Data-Driven Aging Modeling of a Light Electric Vehicle Battery Based on Synthetic Load Cycles and Physics-Based Aging Simulations
AU  - Filip Maletić
AU  - Mario Hrgetić
AU  - Joško Deur
PY  - 2026
DA  - 2026/11/09
JO  - Batteries
DO  - 10.3390/batteries12110478
UR  - https://www.mdpi.com/2313-0105/12/11/478
AB  - Aging of lithium-ion batteries is one of the key features addressed through battery design and management, since it corresponds to continuous decrease in battery energy and power densities. Predicting battery aging during its exploitation in a vehicle by means of detailed, physics-based modeling is challenging due to mathematical and computational complexity, which makes data-driven methods attractive. However, the outputs of data-driven models, such as the capacity change, are hard to measure after every load cycle. This paper, therefore, proposes a data-driven modeling methodology that combines the physics-based and data-driven approaches. A limited amount of recorded field data of a light electric vehicle (a 3.5 kW electric scooter) is used for generating a large amount of synthetic load cycles, which are then inputted to a physical aging simulation model implemented within the GT-AutoLion environment (21 aging simulations with 41,347 load cycles in total). With this approach, the capacity change after every load cycle can be calculated and used as the output of linear regression and alternative neural network models, whose inputs are relevant load cycle features systematically selected from a rich set of feature candidates. The model covers two key aging processes, growth of the solid electrolyte interphase and lithium plating on a graphite anode, the latter employing a neural network-based classifier of plating activation. The data-driven models are surrogates of the physics-based reference model, meaning that the reported errors express their agreement with the reference simulation, and not with the measured capacity fade. On four held-out test simulations, which recombine the recorded micro-cycles of the training simulations but were not used for model identification or selection, the linear regression model of the capacity loss due to interphase growth reaches a per-cycle coefficient of determination of 0.85 and a cumulative error of at most 0.20% of the nominal capacity. The cumulative capacity loss of the complete model deviates from the reference by at most 0.36% of the nominal capacity on the test simulations, partly owing to compensating errors of the lithium-plating sub-models, 0.33% on a simulation driven by the recorded load data of the same scooter, and 1.34% on the validation simulations.
SN  - 2313-0105
ER  -