Surface morphology-driven gas sensing performance of CdS-modified TiO₂ thick film: a study based on fractal concepts.
5 affiliations
- 1Department of Physics, Rajendra College, Jai Prakash University Chapra-841301 India [email protected].
- 2Department of Physics, Deen Dayal Upadhyaya Gorakhpur University Gorakhpur-273009 India.
- 3Department of Physics, Allahabad Degree College, University of Allahabad Prayagraj-211003 India.
- 4Department of Physics, Ewing Christian College, University of Allahabad Prayagraj-211003 India [email protected].
- 5Department of Physics, B. R. M. College, Munger University Munger-841301 India.
Abstract
In recent years, gas sensors have played a crucial role in gas detection technologies, largely due to the increased surface area of their sensing films. The concept of fractals was applied to quantify surface characteristics such as roughness, surface area, and fractal dimension. This approach was employed to enhance sensing performance by informing the design of sensor microstructures. In this study, we investigate how CdS incorporation into TiO₂ affects the fractal characteristics of the fabricated films and analyse the correlation between these properties and performance in detecting volatile organic compounds (VOCs). Thick films based on TiO₂ and CdS-TiO₂ composites were characterised using atomic force microscopy (AFM) and field-emission scanning electron microscopy (FESEM) to analyse their surface morphology. The AFM images were used to estimate parameters such as fractal dimension, Hurst exponent, and surface roughness. The study reveals that these fractal parameters significantly influence the gas sensing properties. The study evaluated the sensing performance of both TiO₂ and CdS-TiO₂ thick films for test VOC gases (LPG, ethanol, toluene, and acetone) at concentrations of 1000-5000 ppm and low operating temperatures. Also, the fabricated sensor studies the effect of relative humidity on sensing properties. Among the tested gases, the sensor based on 2 wt% CdS-TiO₂ exhibited the highest response of 71%, with more selectivity (47.7%) towards acetone over LPG, toluene, and ethanol. The experimental findings are in good agreement with theoretical models, confirming the validity of the approach.
Related
- Development of surface modified Mg-2Gd-2Yb alloy through friction stir processing: corrosion behaviour and short-term anodic performance
- Design Guidelines for Block Copolymer‐Templated In2O3 Nanowires: Linking Morphology, Sintering, and Volatile Organic Compounds Sensing Performance
- Defocusing-Controlled Morphology and Electrochemical Performance of Laser-Induced Graphene Electrodes for Microsupercapacitors
- Comparative Magnetic Heating of Surface-Modified Ferrite Nanoparticles in Water and Agar Phantoms
- Surface-Modified Cellulose Nanofibers for Stabilization of Barite in Water-Based Drilling Fluids Under High Temperatures
BibTeX
@article{vishwakarma2026surface,
title = {{Surface morphology-driven gas sensing performance of CdS-modified TiO₂ thick film: a study based on fractal concepts.}},
author = {Ankit Kumar Vishwakarma and Ajaya Kumar Sharma and Ram Pratap Yadav and Pradip Kumar Priya and Madhvi Yadav and Lallan Yadava},
journal = {RSC advances},
year = {2026},
month = oct,
doi = {10.1039/d6ra06387j},
url = {https://europepmc.org/article/MED/42904118},
note = {CC BY},
}
RIS
TY - JOUR
TI - Surface morphology-driven gas sensing performance of CdS-modified TiO₂ thick film: a study based on fractal concepts.
AU - Ankit Kumar Vishwakarma
AU - Ajaya Kumar Sharma
AU - Ram Pratap Yadav
AU - Pradip Kumar Priya
AU - Madhvi Yadav
AU - Lallan Yadava
PY - 2026
DA - 2026/10/20
JO - RSC advances
DO - 10.1039/d6ra06387j
UR - https://europepmc.org/article/MED/42904118
AB - In recent years, gas sensors have played a crucial role in gas detection technologies, largely due to the increased surface area of their sensing films. The concept of fractals was applied to quantify surface characteristics such as roughness, surface area, and fractal dimension. This approach was employed to enhance sensing performance by informing the design of sensor microstructures. In this study, we investigate how CdS incorporation into TiO₂ affects the fractal characteristics of the fabricated films and analyse the correlation between these properties and performance in detecting volatile organic compounds (VOCs). Thick films based on TiO₂ and CdS-TiO₂ composites were characterised using atomic force microscopy (AFM) and field-emission scanning electron microscopy (FESEM) to analyse their surface morphology. The AFM images were used to estimate parameters such as fractal dimension, Hurst exponent, and surface roughness. The study reveals that these fractal parameters significantly influence the gas sensing properties. The study evaluated the sensing performance of both TiO₂ and CdS-TiO₂ thick films for test VOC gases (LPG, ethanol, toluene, and acetone) at concentrations of 1000-5000 ppm and low operating temperatures. Also, the fabricated sensor studies the effect of relative humidity on sensing properties. Among the tested gases, the sensor based on 2 wt% CdS-TiO₂ exhibited the highest response of 71%, with more selectivity (47.7%) towards acetone over LPG, toluene, and ethanol. The experimental findings are in good agreement with theoretical models, confirming the validity of the approach.
SN - 2046-2069
ER -