Mechanical performance and pavement response of basalt fiber reinforced coal gangue based composites for sustainable road applications
Abstract
Coal gangue is widely generated during coal mining, but its application in pavement materials is limited by insufficient mechanical performance. This study developed a gangue–fly ash–cement–fiber (GFCF) composite and evaluated the effects of basalt fiber dosage on mechanical properties, microstructure, and pavement-scale deformation through laboratory tests, XRD, SEM, and three-dimensional numerical simulations. The results showed that unconfined compressive strength and splitting tensile strength increased with fiber content up to 0.6% and slightly decreased at 0.8%. The 0.6% fiber mixture achieved the highest 28 d UCS and splitting tensile strength of 14.47 MPa and 1.51 MPa, respectively. However, the reduction in compressive resilient modulus with increasing fiber content indicated a strength–stiffness trade-off. Numerical simulations revealed that fiber-dependent material differences had limited effects on settlement, whereas vehicle speed and traffic-load magnitude produced greater deformation variations. XRD and SEM observations qualitatively confirmed matrix densification and possible fiber–matrix interaction during curing. Overall, 0.6% fiber provided the most favorable strength-oriented performance within the tested range, while the numerical results provide comparative evidence for evaluating the pavement-scale response of the GFCF base layer and support the high-value utilization of coal gangue in pavement engineering.
Related
- Effect of Thermoset Matrix Type on the Mechanical, Thermomechanical, and Electromagnetic Performance of Coremat Interlayered Carbon, Glass, and Aramid Fiber-Reinforced Hybrid Sandwich Composites
- Development and multi-response optimization of sustainable hemp fibre/cassia gum reinforced polyester hybrid composites for structural and insulation applications
- Effects of sustainable bamboo-derived cellulose nanocrystals on the mechanical performance and antibacterial potential of dental resin composites
- Mechanical performance of natural fiber reinforced polymer composites with critical assessment of recent advances and future perspectives
- Mechanical, ballistic, and dynamic behaviour of rGO-reinforced kevlar–basalt/epoxy hybrid composites for lightweight engineering applications
BibTeX
@article{huang2026mechanical,
title = {{Mechanical performance and pavement response of basalt fiber reinforced coal gangue based composites for sustainable road applications}},
author = {Peng Huang and Qihe Lan and Erkan Topal and Hu Shao and Zhenjiang You and Chengyi Zhao and Shuxuan Ma},
journal = {Scientific Reports},
year = {2026},
month = nov,
doi = {10.1038/s41598-026-79281-9},
url = {https://www.nature.com/articles/s41598-026-79281-9},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Mechanical performance and pavement response of basalt fiber reinforced coal gangue based composites for sustainable road applications
AU - Peng Huang
AU - Qihe Lan
AU - Erkan Topal
AU - Hu Shao
AU - Zhenjiang You
AU - Chengyi Zhao
AU - Shuxuan Ma
PY - 2026
DA - 2026/11/07
JO - Scientific Reports
DO - 10.1038/s41598-026-79281-9
UR - https://www.nature.com/articles/s41598-026-79281-9
AB - Coal gangue is widely generated during coal mining, but its application in pavement materials is limited by insufficient mechanical performance. This study developed a gangue–fly ash–cement–fiber (GFCF) composite and evaluated the effects of basalt fiber dosage on mechanical properties, microstructure, and pavement-scale deformation through laboratory tests, XRD, SEM, and three-dimensional numerical simulations. The results showed that unconfined compressive strength and splitting tensile strength increased with fiber content up to 0.6% and slightly decreased at 0.8%. The 0.6% fiber mixture achieved the highest 28 d UCS and splitting tensile strength of 14.47 MPa and 1.51 MPa, respectively. However, the reduction in compressive resilient modulus with increasing fiber content indicated a strength–stiffness trade-off. Numerical simulations revealed that fiber-dependent material differences had limited effects on settlement, whereas vehicle speed and traffic-load magnitude produced greater deformation variations. XRD and SEM observations qualitatively confirmed matrix densification and possible fiber–matrix interaction during curing. Overall, 0.6% fiber provided the most favorable strength-oriented performance within the tested range, while the numerical results provide comparative evidence for evaluating the pavement-scale response of the GFCF base layer and support the high-value utilization of coal gangue in pavement engineering.
SN - 2045-2322
ER -