Increase of the electromechanical coupling of piezoelectric vibration harvesters through lateral bars
Abstract
To enhance the performance of vibration energy harvesters, it is essential to maximise the electromechanical coupling coefficient k2 of piezoelectric devices. This enables sufficient harvested power and tuning capability of the resonant frequency through electrical methods. While much literature treats the optimisation of piezoelectric cantilevers, the optimisation range is usually limited by the transverse coupling coefficient k312 of the material. This work introduces an innovative solution to extend the optimisation range and increase the coupling coefficient of piezoelectric cantilevers. This is achieved by minimising lateral strain in the beam using lateral bars to maximise the equivalent material coupling coefficient. The theoretical basis of this innovation is demonstrated through the exploitation of the constitutive equations of piezoelectric materials. The interest of the addition of lateral bars to increase the coupling coefficient is demonstrated and studied with simulations based on the finite elements method. Finally, a proof of concept is realised using a aluminum cantilever prototype integrating a lead-free KNaNbO3 (KNN) piezoelectric material. It is tested under vibration at 0.1 m/s2 with variable resistive loads. The results show that the coupling coefficient increases by 30% and the relative frequency bandwidth by 32% with resistive tuning of the resonant frequency, by fixing eight steel bars to the cantilever. The designed prototype is a highly performant leadfree vibration energy harvester. It produces a maximum power of 49.9 μW at resonance, and its normalised power density is equal to 16.5 mW/G2/cm3. Its relative frequency bandwidth is equal to 3.1%.
Related
- Fast--slow analysis of a bistable nonlinear energy sink for simultaneous vibration mitigation and piezoelectric energy harvesting
- Sustainable Metal-Organic Framework Water Harvesters in the Artificial Intelligence Era
- Coils in thermomagnetic harvesters -- a comparative study
- Triboelectrification of a dense metal-organic framework for resilient mechanical energy harvesters
- Damping by design in a bilateral electromechanical transducer
BibTeX
@misc{gibus2026increase,
title = {{Increase of the electromechanical coupling of piezoelectric vibration harvesters through lateral bars}},
author = {David Gibus and Grégoire Forges and Hélène Debéda and Pierre Gasnier and Adrien Badel},
howpublished = {arXiv},
year = {2026},
month = sep,
doi = {10.48550/arxiv.2609.15557},
eprint = {2609.15557},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2609.15557},
}
RIS
TY - UNPB
TI - Increase of the electromechanical coupling of piezoelectric vibration harvesters through lateral bars
AU - David Gibus
AU - Grégoire Forges
AU - Hélène Debéda
AU - Pierre Gasnier
AU - Adrien Badel
PY - 2026
DA - 2026/09/14
PB - arXiv
DO - 10.48550/arxiv.2609.15557
UR - https://arxiv.org/abs/2609.15557
AB - To enhance the performance of vibration energy harvesters, it is essential to maximise the electromechanical coupling coefficient k^2 of piezoelectric devices. This enables sufficient harvested power and tuning capability of the resonant frequency through electrical methods. While much literature treats the optimisation of piezoelectric cantilevers, the optimisation range is usually limited by the transverse coupling coefficient k31^2 of the material. This work introduces an innovative solution to extend the optimisation range and increase the coupling coefficient of piezoelectric cantilevers. This is achieved by minimising lateral strain in the beam using lateral bars to maximise the equivalent material coupling coefficient. The theoretical basis of this innovation is demonstrated through the exploitation of the constitutive equations of piezoelectric materials. The interest of the addition of lateral bars to increase the coupling coefficient is demonstrated and studied with simulations based on the finite elements method. Finally, a proof of concept is realised using a aluminum cantilever prototype integrating a lead-free KNaNbO3 (KNN) piezoelectric material. It is tested under vibration at 0.1 m/s^2 with variable resistive loads. The results show that the coupling coefficient increases by 30% and the relative frequency bandwidth by 32% with resistive tuning of the resonant frequency, by fixing eight steel bars to the cantilever. The designed prototype is a highly performant leadfree vibration energy harvester. It produces a maximum power of 49.9 μW at resonance, and its normalised power density is equal to 16.5 mW/G^2/cm^3. Its relative frequency bandwidth is equal to 3.1%.
ER -