Experimental investigation of the relationship between pore structure and methane adsorption in coals with adsorption constant quantification
9 affiliations
- 1School of Safety and Emergency Management Engineering, Taiyuan University of Technology Taiyuan 030024 PR China
- 2Post-doctoral Research Station of Jinneng Holding Coal Industry Co., Ltd Datong 037000 PR China
- 3State Key Laboratory of Coal Mine Disaster Prevention and Control Chongqing 400037 PR China
- 4CCTEG Chongqing Research Institute Chongqing 400037 PR China
- 5School of Resources and Safety Engineering, University of Science and Technology Beijing 100083 PR China
- 6National Key Laboratory for Green Development of Coking Coal Resources Pingdingshan 467000 PR China
- 7College of Safety and Environmental Engineering, Shandong University of Science and Technology Qingdao 266590 PR China
- 8State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University Chongqing 400044 China
- 9Sanshandao Gold Mine of Shandong Gold Mining Industry (Laizhou) Co., Ltd Yantai 261400 China
Abstract
The pore system of coal provides both methane storage sites and migration pathways, controlling coalbed methane (CBM) recovery. In this study, five coal samples ranging from bituminous coal to anthracite were investigated using scanning electron microscopy (SEM), low-temperature nitrogen adsorption (LTN2GA), and methane adsorption experiments. The relationships among pore structure parameters, fractal dimension, and methane adsorption behavior were analyzed, and the errors associated with two modified linear methods for calculating Langmuir adsorption constants were evaluated. The results show that highly metamorphosed coals are dominated by micropores and possess larger specific surface areas (SSA). EDS analysis showed that C and O were the dominant elements in the coal samples, accompanied by minor amounts of Al, Si, and S. The fractal dimension exhibits an asymmetric U-shaped trend with decreasing coal rank, and SSA shows an exponential relationship with fractal dimension, particularly within the SSA range of 0–10 m2 g−1. Methane adsorption capacity and adsorption constants increase with decreasing pore size, while pore volume shows no clear correlation with adsorption parameters. Fractal dimension exhibits a positive correlation with adsorption constants, indicating the influence of pore heterogeneity on methane adsorption. The relative errors of adsorption constant a calculated by the two linear methods are 0.08–3.57% and 0.22–1.46%, respectively, while those of b are 0–12.68% and 1.87–16.03%, respectively. The comparison shows that Langmuir parameter estimates depend on the fitting formulation and supports fitting on the original adsorption scale with an appropriate residual model. Although pore characteristics are affected by coal-specific geological conditions, this study provides a useful reference for understanding pore structure–adsorption relationships and CBM reservoir evaluation.
Related
- FTIR-Based Quantification of a Corrosion Inhibitor in Solution: Experimental Investigation and Quantum-Chemical Modeling
- Systematic investigation of cationic monomeric, dimeric, and trimeric surfactants for self-assembly, adsorption thermodynamics, and enhanced oil displacement
- Wasp Nest as a Natural Cellulose–Protein Biocomposite Material: Integrated Investigation of Structural Properties, Microbiota and Uranium Adsorption Performance
- Surface and Electrochemical Investigation of a Novel Isoxazolone Inhibitor for Carbon Steel Corrosion: Adsorption and Inhibition Mechanism
- Unlocking the electronic and adsorption origin of doping-engineered WS2 monolayers: a DFT investigation with machine learning validation
BibTeX
@article{liu2026experimental,
title = {{Experimental investigation of the relationship between pore structure and methane adsorption in coals with adsorption constant quantification}},
author = {Jia Liu and Shudong He and Fan Wu and Tingting Cai and Hongwei Liu and Yabin Gao and Mengmeng Yang and Xuelin Yang and Hao Xu and Huapeng Xu},
journal = {RSC Advances},
year = {2026},
month = nov,
doi = {10.1039/d6ra07374c},
url = {https://doi.org/10.1039/d6ra07374c},
note = {CC BY-NC 3.0},
}
RIS
TY - JOUR
TI - Experimental investigation of the relationship between pore structure and methane adsorption in coals with adsorption constant quantification
AU - Jia Liu
AU - Shudong He
AU - Fan Wu
AU - Tingting Cai
AU - Hongwei Liu
AU - Yabin Gao
AU - Mengmeng Yang
AU - Xuelin Yang
AU - Hao Xu
AU - Huapeng Xu
PY - 2026
DA - 2026/11/09
JO - RSC Advances
DO - 10.1039/d6ra07374c
UR - https://doi.org/10.1039/d6ra07374c
AB - The pore system of coal provides both methane storage sites and migration pathways, controlling coalbed methane (CBM) recovery. In this study, five coal samples ranging from bituminous coal to anthracite were investigated using scanning electron microscopy (SEM), low-temperature nitrogen adsorption (LTN2GA), and methane adsorption experiments. The relationships among pore structure parameters, fractal dimension, and methane adsorption behavior were analyzed, and the errors associated with two modified linear methods for calculating Langmuir adsorption constants were evaluated. The results show that highly metamorphosed coals are dominated by micropores and possess larger specific surface areas (SSA). EDS analysis showed that C and O were the dominant elements in the coal samples, accompanied by minor amounts of Al, Si, and S. The fractal dimension exhibits an asymmetric U-shaped trend with decreasing coal rank, and SSA shows an exponential relationship with fractal dimension, particularly within the SSA range of 0–10 m2 g−1. Methane adsorption capacity and adsorption constants increase with decreasing pore size, while pore volume shows no clear correlation with adsorption parameters. Fractal dimension exhibits a positive correlation with adsorption constants, indicating the influence of pore heterogeneity on methane adsorption. The relative errors of adsorption constant a calculated by the two linear methods are 0.08–3.57% and 0.22–1.46%, respectively, while those of b are 0–12.68% and 1.87–16.03%, respectively. The comparison shows that Langmuir parameter estimates depend on the fitting formulation and supports fitting on the original adsorption scale with an appropriate residual model. Although pore characteristics are affected by coal-specific geological conditions, this study provides a useful reference for understanding pore structure–adsorption relationships and CBM reservoir evaluation.
SN - 2046-2069
ER -