Skip to content
DraconiticResearch
Search Sources API
186,541 studies31 sourcesUpdated 47 min ago
Peer-reviewedCC BY 4.0Scientific Reports

Cost-performance evaluation of socks developed from post-consumer denim waste and recycled polyester

Abstract

Post-consumer denim waste is a major cotton-rich waste stream, but its use in durable textile products remains challenging because mechanical recycling shortens and damages fibers. This study developed half-terry socks from recycled denim cotton blended with recycled polyester and compared them with virgin polyester/cotton control socks. Twelve variants of recycled yarns were produced using three recycled polyester/recycled cotton ratios: 90/10, 80/20, and 70/30, through ring and rotor spinning at two twist levels. The socks were evaluated for structural properties, comfort-related performance, durability and production cost. The recycled socks were successfully produced with comparable structural properties to the control and generally showed higher air permeability, indicating better breathability. Moisture management was mainly controlled by sock region, following the order leg > upper foot > terry sole, with the terry sole acting mainly as an absorbent and cushioning zone. Cost analysis showed that recycled socks were cheaper, costing 0.149 to 0.152 €/pair, compared with 0.160 €/pair for the virgin control. However, durability is the main limitation: all recycled socks showed pilling grade 1, while the control showed grade 3, and abrasion loss increased with recycled cotton content. Recycled denim-based socks demonstrated comparable structural properties, improved breathability, lower estimated production cost, slightly higher air permeability, and circular material benefits; however, poor pilling resistance and greater abrasion loss remain key barriers to commercial adoption, highlighting the need for further improvements in recycled yarn quality and surface durability.

Related

  1. Study on the Application of Recycled Polyester Fibers in Stone Matrix Asphalt Mixtures
    Changjing Xu, Qinggang Li, Lei Xia +4
    ACS OmegaPeer-reviewedCC BY-NC-ND 4.0Full textGeneral chemistryCrossrefEurope PMCEurope PMCPMC
  2. Lightweight Mechanical Performance of Hybrid Al 2 O 3 /TiO 2 Nano-Reinforced Jute Fiber Biocomposites with Polyester and Epoxy Matrices for Potential Automotive Exterior Applications
    Nafissa Moussaoui, Salah Amroune, Moussa Zaoui +5
    Journal of Natural FibersPeer-reviewedCC BY5 citedMaterials & polymersOpenAlex
  3. Performance and Interaction Mechanisms of Bitumen Modified with Devulcanized Rubber-Recycled Polymer Composites
    Akkenzhe Bussurmanova, Anar Akkenzheyeva, Uzilkhan Yensegenova +10
    PolymersPeer-reviewedCC BY 4.0Full textMaterials & polymersCrossrefEurope PMC
  4. Upcycling Recycled PET into High-Performance Polyurethane Coating and Engineering Materials: Effect of NCO Index on Mechanical, Stability, and Surface Properties
    Panachai Thusanaphoom, Jureeporn Yuennan, Wichain Chailad +5
    ACS Polymers AuPeer-reviewedCC BY-NC-ND 4.0Full text1 citedSystems & synthetic biologyGeneral chemistryHALEurope PMC
  5. Mechanical performance and eco-efficiency of thermoplastic polyurethane composites reinforced with recycled tire rubber
    Jorge Escobar-Ortiz, Alex Chiguano, Elvia Gallegos-Castro +2
    Environmental Science: AdvancesPeer-reviewedCC BYFull textMaterials & polymersDOAJ
BibTeX
@article{anas2026costperformance,
  title = {{Cost-performance evaluation of socks developed from post-consumer denim waste and recycled polyester}},
  author = {Muhammad Sohaib Anas and Inga Dabolina and Daiva Mikucioniene},
  journal = {Scientific Reports},
  year = {2026},
  month = oct,
  doi = {10.1038/s41598-026-76062-2},
  url = {https://www.nature.com/articles/s41598-026-76062-2},
  note = {CC BY 4.0},
}
RIS
TY  - JOUR
TI  - Cost-performance evaluation of socks developed from post-consumer denim waste and recycled polyester
AU  - Muhammad Sohaib Anas
AU  - Inga Dabolina
AU  - Daiva Mikucioniene
PY  - 2026
DA  - 2026/10/13
JO  - Scientific Reports
DO  - 10.1038/s41598-026-76062-2
UR  - https://www.nature.com/articles/s41598-026-76062-2
AB  - Post-consumer denim waste is a major cotton-rich waste stream, but its use in durable textile products remains challenging because mechanical recycling shortens and damages fibers. This study developed half-terry socks from recycled denim cotton blended with recycled polyester and compared them with virgin polyester/cotton control socks. Twelve variants of recycled yarns were produced using three recycled polyester/recycled cotton ratios: 90/10, 80/20, and 70/30, through ring and rotor spinning at two twist levels. The socks were evaluated for structural properties, comfort-related performance, durability and production cost. The recycled socks were successfully produced with comparable structural properties to the control and generally showed higher air permeability, indicating better breathability. Moisture management was mainly controlled by sock region, following the order leg > upper foot > terry sole, with the terry sole acting mainly as an absorbent and cushioning zone. Cost analysis showed that recycled socks were cheaper, costing 0.149 to 0.152 €/pair, compared with 0.160 €/pair for the virgin control. However, durability is the main limitation: all recycled socks showed pilling grade 1, while the control showed grade 3, and abrasion loss increased with recycled cotton content. Recycled denim-based socks demonstrated comparable structural properties, improved breathability, lower estimated production cost, slightly higher air permeability, and circular material benefits; however, poor pilling resistance and greater abrasion loss remain key barriers to commercial adoption, highlighting the need for further improvements in recycled yarn quality and surface durability.
SN  - 2045-2322
ER  -