Optimizing barn-type house geometry for minimum envelope area and first-order transmission heat-loss reduction
- 1Department of Architectural and Construction Design, Wrocław University of Science and Technology
- 2Hugo Steinhaus Center, Department of Applied Mathematics, Wrocław University of Science and Technology
Abstract
Barn-type houses are used in contemporary single-family residential architecture because of their simple gable-roof geometry, functional clarity, and compatibility with compact building forms. This paper presents the derivation of closed-form solutions for optimizing barn-type house geometry by minimizing the above-grade external surface area under fixed-volume and fixed-floor-area constraints. Explicit formulas are obtained for the optimal width, length, wall height, and minimum envelope area as functions of the roof slope angle. The study also applies an existing dimensionless compactness concept to the specific case of barn-type geometries, using it to quantify deviations from the theoretical envelope-area minimum. The proposed formulas and compactness assessment are demonstrated through selected illustrative case studies of existing barn-type houses. The results indicate that deviations from the constrained optimum can lead to measurable envelope-area penalties. Under the stated simplified assumptions, reductions in envelope area may be used to derive approximate, first-order estimates of envelope-related cost implications and transmission heat-loss reduction. The proposed method should therefore be understood as an early-stage geometric decision-support tool, rather than as a complete assessment of building energy demand, construction cost, life-cycle performance, or sustainability.
Related
- Cost-optimal transmission reduction in early pandemic response: a multi-objective health-economic modelling study across 110 countries
- Slow power-envelope associations among brain, heart, and gut signals during sleep: an exploratory multivariate transfer entropy study
- Nanoformulated silymarin enhances antifungal activity against resistant Candida albicans by reducing ergosterol and binding to cell envelope targets
- Optimizing U.S. Prehospital Care of STEMI Because Time is Life, Not Just Muscle
- Optimizing the Heart Transplant Allocation Criteria in Japan ― So Far, and the Road Ahead ―
BibTeX
@article{rokitamagdziarz2026optimizing,
title = {{Optimizing barn-type house geometry for minimum envelope area and first-order transmission heat-loss reduction}},
author = {Ewa Rokita-Magdziarz and Barbara Gronostajska and Marcin Magdziarz},
journal = {Scientific Reports},
year = {2026},
month = jul,
doi = {10.1038/s41598-026-63620-x},
url = {https://doi.org/10.1038/s41598-026-63620-x},
note = {CC BY},
}
RIS
TY - JOUR
TI - Optimizing barn-type house geometry for minimum envelope area and first-order transmission heat-loss reduction
AU - Ewa Rokita-Magdziarz
AU - Barbara Gronostajska
AU - Marcin Magdziarz
PY - 2026
DA - 2026/07/01
JO - Scientific Reports
DO - 10.1038/s41598-026-63620-x
UR - https://doi.org/10.1038/s41598-026-63620-x
AB - Barn-type houses are used in contemporary single-family residential architecture because of their simple gable-roof geometry, functional clarity, and compatibility with compact building forms. This paper presents the derivation of closed-form solutions for optimizing barn-type house geometry by minimizing the above-grade external surface area under fixed-volume and fixed-floor-area constraints. Explicit formulas are obtained for the optimal width, length, wall height, and minimum envelope area as functions of the roof slope angle. The study also applies an existing dimensionless compactness concept to the specific case of barn-type geometries, using it to quantify deviations from the theoretical envelope-area minimum. The proposed formulas and compactness assessment are demonstrated through selected illustrative case studies of existing barn-type houses. The results indicate that deviations from the constrained optimum can lead to measurable envelope-area penalties. Under the stated simplified assumptions, reductions in envelope area may be used to derive approximate, first-order estimates of envelope-related cost implications and transmission heat-loss reduction. The proposed method should therefore be understood as an early-stage geometric decision-support tool, rather than as a complete assessment of building energy demand, construction cost, life-cycle performance, or sustainability.
SN - 2045-2322
ER -