Crystallinity-Regulated Hydration, Molecular Mobility, and Mechanical Softening of Poly(ether ether ketone): A Reactive Molecular Dynamics Study
- 1Penn State Behrend , , , ,
Abstract
Poly(ether ether ketone) (PEEK) is a high-performance semicrystalline thermoplastic widely used in aerospace, biomedical, and energy applications because of its excellent mechanical properties and resistance to harsh environments. However, the molecular mechanisms governing its short-time response to moisture exposure remain incompletely understood. In this work, reactive molecular dynamics simulations were performed to investigate the short-time hydration response of amorphous and semicrystalline PEEK in the dry state and at 1 and 3 wt % water. Water distribution, local hydration structure, molecular mobility, density-derived glass-transition behavior, and constrained directional moduli were analyzed to establish relationships among crystallinity, hydration, and thermomechanical behavior. Water showed greater local association with carbonyl oxygen than with ether oxygen, while increasing water content increased local coordination and molecular fluctuations. In semicrystalline PEEK, crystalline domains spatially confined these hydration-induced mobility enhancements, whereas the density-derived apparent glass-transition temperature showed a modest downward trend at 3 wt % water that was not resolved within the observed simulation variability. Increasing water content nevertheless progressively reduced the constrained directional moduli through plasticization, particularly within the amorphous and crystal–amorphous interfacial regions, whereas the crystalline phase retained substantial chain-direction stiffness. These results indicate that within the constructed models and sampled time scale, crystalline morphology restricted hydration-induced plasticization by limiting water accessibility and molecular mobility. No persistent hydration-induced bond-cleavage events were observed over the simulated time scale.
Related
- Bifurcated Fluorotelomer Carboxylic Acid Biotransformation: Enoyl-Hydration versus Hydroxylation Regulated by Redox Conditions.
- Hydration Characteristics and Mechanical Property of Microfine Cement–Silica Fume Composites Modified with Cellulose Nanocrystals
- Graphene Oxide-Regulated Calcium Alginate Molecularly Imprinted Hydrogel Films with Enhanced Physico-Mechanical Properties and Selective Protein Recognition.
- A chemo-mechanical regulated flexible-rigid binder enables high-rate Na-S batteries.
- A Reductionist Molecular Dynamics Framework for Identifying Molecular Descriptors of Hydration at Solid–Liquid Biomaterial Interfaces
BibTeX
@article{wu2026crystallinityregulated,
title = {{Crystallinity-Regulated Hydration, Molecular Mobility, and Mechanical Softening of Poly(ether ether ketone): A Reactive Molecular Dynamics Study}},
author = {Xiawa Wu},
journal = {ACS Omega},
year = {2026},
month = oct,
doi = {10.1021/acsomega.6c08565},
url = {https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08565/5460393/Crystallinity-Regulated-Hydration-Molecular},
note = {CC BY 4.0},
}
RIS
TY - JOUR
TI - Crystallinity-Regulated Hydration, Molecular Mobility, and Mechanical Softening of Poly(ether ether ketone): A Reactive Molecular Dynamics Study
AU - Xiawa Wu
PY - 2026
DA - 2026/10/28
JO - ACS Omega
DO - 10.1021/acsomega.6c08565
UR - https://pubs.acs.org/acsodf/article/doi/10.1021/acsomega.6c08565/5460393/Crystallinity-Regulated-Hydration-Molecular
AB - Poly(ether ether ketone) (PEEK) is a high-performance semicrystalline thermoplastic widely used in aerospace, biomedical, and energy applications because of its excellent mechanical properties and resistance to harsh environments. However, the molecular mechanisms governing its short-time response to moisture exposure remain incompletely understood. In this work, reactive molecular dynamics simulations were performed to investigate the short-time hydration response of amorphous and semicrystalline PEEK in the dry state and at 1 and 3 wt % water. Water distribution, local hydration structure, molecular mobility, density-derived glass-transition behavior, and constrained directional moduli were analyzed to establish relationships among crystallinity, hydration, and thermomechanical behavior. Water showed greater local association with carbonyl oxygen than with ether oxygen, while increasing water content increased local coordination and molecular fluctuations. In semicrystalline PEEK, crystalline domains spatially confined these hydration-induced mobility enhancements, whereas the density-derived apparent glass-transition temperature showed a modest downward trend at 3 wt % water that was not resolved within the observed simulation variability. Increasing water content nevertheless progressively reduced the constrained directional moduli through plasticization, particularly within the amorphous and crystal–amorphous interfacial regions, whereas the crystalline phase retained substantial chain-direction stiffness. These results indicate that within the constructed models and sampled time scale, crystalline morphology restricted hydration-induced plasticization by limiting water accessibility and molecular mobility. No persistent hydration-induced bond-cleavage events were observed over the simulated time scale.
SN - 2470-1343
ER -